Tutorials

  • Drafting ×

Cap screws and machine screws

dea
in Drafting
65 12 Intermediate
Cap screws and machine screws are similar in shape, differing only in their relative sizes. Machine screws are usually smaller in size, compared to cap screws. These are used for fastening two parts, one with clearance hole and the other with tapped hole. The clearance of the unthreaded hole need not be shown on the drawing as its presence is obvious. Figure 5.24 shows different types of cap and machine screws, with proportions marked Cap screws are produced in finish form and are used on machines where accuracy and appearance are important. As cap screws are inferior to studs, they are used only on machines requiring few adjustments and are not suitable where frequent removal is necessary. These are produced in different diameters, upto a maximum of 100 mm and lengths 250 mm. Machine screws are produced with a naturally bright finish and are not heat treated. They are particularly adopted for screwing into thin materials and the smaller ones are threaded throughout the length. They are used in fire-arms, jigs, fixture and dies. They are produced in different diameters upto a maximum of 20 mm and lengths upto 50 mm.
Autodesk Inventor screw cap

test

kemal dursun
in Drafting
0 11 Intermediate
test
ArchiCAD test

How to create a block in AutoCAD?

Karajko CAD
in Drafting
18 5 Beginner
In my first tutorial on GrabCAD I will show you how to create Blocks in AutoCAD. It is nothing complicated so lets start.
AutoCAD blocks autocad

How to draw tangent arcs between two circles in AutoCAD?

Karajko CAD
in Drafting
22 4 Beginner
In this tutorial I am going to show you the easiest way to draw arc between two circles when you need specific radius.
AutoCAD drafting radius arcs autocad

Solidworks tutorial creating a Cycloid Epicycloid Curve

Ayman Ezzat
in Drafting
3 3 Expert
These curves are very important to draw and understand for each student and engineer as follows:- Epicycloid or hypercycloid is a plane curve produced by tracing the path of a chosen point on the circumference of a circle—called an epicycle—which rolls without slipping around a fixed circle. It is a particular kind of roulette. A cycloid is the curve traced by a point on a circle as it rolls along a straight line without slipping. A cycloid is a specific form of trochoid and is an example of a roulette, a curve generated by a curve rolling on another curve
SOLIDWORKS curves drafting autocad soldiworks

How to copy sketch to a different plane in SOLIDWORKS?

Karajko CAD
in Drafting
5 3 Beginner
How to copy sketch to different plane in SOLIDWORKS?
SOLIDWORKS planes copy sketch solidworks

How to insert a picture in SOLIDWORKS?

Karajko CAD
in Drafting
20 3 Beginner
How to insert a picture in SOLIDWORKS?
SOLIDWORKS picture sketch solidworks

Basic Symbols Used in Engineering Drawings

FredSWUG
in Drafting
10 3 Beginner
Learn about the ways these common features are described in drawings. Counterbore Countersink Spotface Depth Diameter Radius I should also mention that I did not create this course, I just found it online and thought it was pretty well done. https://www.wisc-online.com/learn/career-clusters/stem/eng16204/basic-symbols-used-in-engineering-drawings
Other radius diameter depth spotface countersink counterbore

2D CAD EXERCISES 31 IN SOLIDWORKS

Karan Talsaniya
in Drafting
1 3 Beginner
2D CAD EXERCISES 31 IN SOLIDWORKS
SOLIDWORKS 2d cad exercises 31 solidworks

Perspective Views on Drawings at Solidworks

Andrey Gran
in Drafting
10 3 Beginner
Step by step Creating Perspective Views on Drawings at Solid Works
SOLIDWORKS drawing view perspective

HOW TO CHANGE UNIT IN AUTOCAD

Kartik Bhawar
in Drafting
1 2 Beginner
In this tutorial,we will see how to change UNITS in AUTOCAD
AutoCAD bhawar kartik autocad

How to export your file to PDF in AutoCAD?

Karajko CAD
in Drafting
10 2 Beginner
How to export your file to PDF in AutoCAD?
AutoCAD export pdf autocad

Configuring SolidWorks with Keyshot

Arif Shahriar
in Drafting
3 2 Beginner
to enable easy linking, increased speed and efficiency when working simultaneously with Keyshot and SolidWorks.
SOLIDWORKS keyshot solidworks

Tutorial 1. Configuraciones de croquis y trabajo de unidades de medida.

Daniel Loera
in Drafting
0 2 Beginner
Solidworks 2015 tutorial Universidad Autónoma de Aguascalientes - Campus Sur Ingeniería en Diseño Mecánico IDM. Daniel Martínez
SOLIDWORKS drawings solidworks beginner tutorial
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.