Tutorials

I Built a Military Robot

43 6 Intermediate
Mobile, military robot optimized for use in desert environments which can be controlled remotely or autonomously and can collect/ stream video to a VR headset via its front mounted camera. The method of movement is a continuous track, created using steel roller chain connected by fasteners with 3D printed links. These loops sit on a custom designed drive sprocket and idler sprocket with 4 shock absorber loaded roller pins that act as the suspension system. The drive motors are powered by '18650' batteries, directed by a raspberry pi 4 and connected to a motor controller. For connectivity, a mobile device can connect to the pi's external antenna as it is a WiFi access point. From here, directions can be sent to the robot from the mobile device using the Node Red GUI and additionally, the entirety of the main raspberry pi computer can be accessed for the use of sending custom commands for autonomous movement.

How to design Complete Robot using Voice Assistant like JARVIS in Fusion 360

14 1 Intermediate
4-wheeled Robot Design Frame is 3D printable. Components - 1. Raspberry pi 4 2. Sony WebCam 3. Normal 3.5 mm jack Speaker 4. Custom Frame 5. MI 20000 mAh powerbank 6. 100 RPM Dual Shaft BO Motor - Straight with wheels Custom Voice Assistance code is running in background. Voice assistance code is connected with database which is having values like quantity and dimensions of components. Mail me for Jarvis source code. Like this video... 🤘

Gear "Module" Explained in 1 Minute

7 2 Beginner
#GearModule #Gears #Module https://amzn.to/3fjbhH3 Module=d/N (d is pitch diameter and N is number of teeth) Number of Teeth = Reference Diameter/ Module Reference Diameter = Module x Number of Teeth Reference Pitch = Module x Pi Like and subscribe for more!

Draw Third Angle Orthographic Projection

5 0 Beginner
Shows how to make a third angle orthographic projection from isometric projection.

Draw First Angle Projection

5 0 Beginner
Shows how to make a first angle orthographic projection form isometric projection

How to Orient a 3D Printed Part for Smooth Finishing

4 0 Beginner
This tutorial will show you the best practices for orienting a part in order to achieve a smooth finish.

Torus Pipe Analysis

0 0 Intermediate
This video explains the Torus Pipe Analysis.

Tutorial: How to download GrabCAD Print

0 0 Beginner
In this tutorial I’ll show how to download GrabCAD Print

How to do thermal ands static simulation on cantilever and Simply Supported Beam

0 0 Beginner
Hello everyone, in this simple short video, i've shown a process of using static and thermal stress simulation using Autodesk Fusion 360 . and there are somethings in the model which i overlooked as this tutorial is meant for beginners, so i've tried to keep it very simple. so follow the video till last.