Tutorials

Linking ABAQUS and FORTRAN

9 6 Beginner
ABAQUS and FORTRAN are linked to execute User Subroutines such as VUMAT, UMAT, USDFLD, etc. You can find various versions of ABAQUS and FORTRAN Available. Here is the compatibility list: ABAQUS 2017 - Intel Composer XE 2013 or above, - Visual Studio 2010 or above v6.14 - Intel Visual Fortran 12.0 or above - Visual Studio 2010 or above One can download Student version of FORTRAN for free from here: https://software.intel.com/en-us/qualify-for-free-software/student

[VIDEO] Abaqus CAE machining tutorials

6 1 Intermediate
How to achieve different machining operations with Abaqus CAE ? This tutorial shows how to set up different machining techniques, like drilling, milling, turning ....and so on in Abaqus CAE ! If you like this, please suscribe my Youtube Channel !

Ansys WB moving heat source tutorial

4 2 Beginner
How to achieve a moving heat source with Ansys Workbench ? This tutorial shows how to achieve this goal (full APDL commands included!!!!!)

How to export Altium Designer PCB Document with 3D Models to Ansys Electronics Desktop IcePak to Solve Thermal Problem

4 0 Intermediate
This article gives a good way to import a clean PCB layout to AEDT IcePak. This method may be used in another EDA software, such as PADs or Candence an so on.

Linear Static Study in 10 simple steps.

13 4 Intermediate
Linear Static Study with SolidEdge.

[Video] Thermal Analysis of Shell and Tube Type Heat Exchanger

7 0 Expert
This video (Link shown below) Briefs shell and tube type heat exchanger introduction, construction, workflow, etc. It explains shell side and tube side of heat exchanger. It also explains how to apply thermal loading on shell side and tube side, how to consider perfectly insulated condition, how to applied air convection for outer saddle bodies in ansys workbench. It shows how to achieve thermal gradient and match with the applied loading conditions.

Modelagem por superfície e simulação estática

8 0 Intermediate
Tutorial sobre simulação de esforços estáticos em viga I, sendo que também apresento a parte da modelagem da viga, por recursos de superfícies. Também abordo a geração automática de relatórios após a simulação.

Fsae upright - static structural analysis in Ansys Workbench

1 0 Intermediate
In this tutorial I will be showing you how to perform a static structural analysis of fsae upright in Ansys Workbench 18 Topics covered: Apply material to the imported geometry; Mesh Statistics; Create custom coordinate systems (rotate coordinate systems); Apply forces through the coordinate systems; Post processing; Save results through the images.

Simulation of Incremental Sheet Forming-Ansys & Lsdyna

4 0 Expert
This tutorial covers the following: 1-Definition of ISF process. 2-Modeling the blank and tool using DM 3-Meshing the Blank 4-Generating (.k file) via Ansys explicit Ls-dyna export 5-Boundary conditions 6-Contact controls 7-Shell controls 8-mass scaling 9-section ID 10-Database controls 11-How to run the file

Introduction to Finite Element Method /CAE

13 0 Beginner
Finite Element Method for product design and process improvement.

Ansys-Dynamic analysis of a Racing vehicle chassis

1 1 Expert
English subtitles added

Fusion 360 Thermal Simulation of CPU Heatsink: Heat Transfer Analysis Tutorial

6 0 Beginner
#Fusion360Tutorial #Fusion360Simulation #Fusion360ThermalSimulation Thermal simulation of a CPU chip which is attached to a heatsink in autodesk fusion 360. There is a CPU in red, attached to a PCB board and that is attached to the aluminum heatsink. A. Lets go to the simulation workspace first... B. Study materials- set materials C. Set Thermal Loads- Bodies- Select body of Chip D. Thermal load set in Watts for a consumer level CPU

Sphere of influence and Coordinate system in ANSYS - Tutorial

1 0 Intermediate
In this video you can find the use of SPHERE OF INFLUENCE tool for mesh in ansys and you will also learn how to generate COORDINATE SYSTEM in ansys.

ANSYS

5 0 Beginner
https://youtu.be/Az4hPtSuVRI

[VIDEO] Stop Valve FEA

6 0 Expert
This video (Refer Video Link below) explains detail FE analysis of stop valve. It briefs introduction & construction of stop valve, Also explains the geometry simplification, FEA model mesh creation, contact definitions, bolt pretension and pressure load application, stress extraction and stress assessment though stress linearization using ANSYS. Video Link: https://youtu.be/naaFwGbSQoY