Tutorials

Cap screws and machine screws

53 12 Intermediate
Cap screws and machine screws are similar in shape, differing only in their relative sizes. Machine screws are usually smaller in size, compared to cap screws. These are used for fastening two parts, one with clearance hole and the other with tapped hole. The clearance of the unthreaded hole need not be shown on the drawing as its presence is obvious. Figure 5.24 shows different types of cap and machine screws, with proportions marked Cap screws are produced in finish form and are used on machines where accuracy and appearance are important. As cap screws are inferior to studs, they are used only on machines requiring few adjustments and are not suitable where frequent removal is necessary. These are produced in different diameters, upto a maximum of 100 mm and lengths 250 mm. Machine screws are produced with a naturally bright finish and are not heat treated. They are particularly adopted for screwing into thin materials and the smaller ones are threaded throughout the length. They are used in fire-arms, jigs, fixture and dies. They are produced in different diameters upto a maximum of 20 mm and lengths upto 50 mm.

Project Manager

12 0 Expert
Hello, I have been working professionally on technical drawing and design since 1993 I have worked on a wide variety of projects. I am a freelancer Nice to talk and learn with everyone. f.sogukkuyu@gmail.com

[EPS 04] Cara membuat Etiket Gambar Teknik | Autodesk Inventor

3 0 Beginner
Cara membuat Etiket Gambar Teknik dengan Autodeks Inventor

Autodesk Inventor Tutorial Adding colour

0 0 Beginner
https://www.youtube.com/watch?v=iickqMM7mV0

Shaft Break View Tutorials

0 0 Beginner
Inventor has limited break view style. For Pipe/Rod/Shaft we can modify in drawing files for a nicer look Here is the the demo video : https://vimeo.com/550047734

Hydraulic Floor Jack Drawing

0 0 Beginner
Hydraulic Floor Jack Drawing

Using Sketch in Inventor Assembly Parts.

1 0 Beginner
1. Create a sketch from the assembly parts. 2. Build new parts by referring to sketches.

Create blue print by Autodesk Inventor

2 1 Intermediate
In this tutorial, study how to create a blue print by Autodesk inventor.

Inventor Delete Constraints.

0 1 Beginner
Inventor Delete Constraints.

Hydraulic Floor Jack Drawing

0 0 Beginner
Hydraulic Floor Jack Drawing Tutorial

VMC ELECTRICAL EQUIPMENT

0 0 Beginner
Library Electrical Equipment in cabinet on VIETSTAR MEIDEN Coporation

Template de folha no Autodesk Inventor 2023

0 0 Beginner
Neste tutorial Inventor vou te ensinar como criar o seu template de folha no autodesk inventor 2023. Estou trabalhando de acordo com a norma ABNT NBR 16752:2020 (Requisitos para apresentação em folhas de desenho). Utilizamos muito essa função para determinarmos um modelo de folha pra a nossa empresa, escola e/ou projeto. E nada melhor do que começar aprendendo a deixar tudo conforme a sua necessidade. 🟩 Curso Fundamentos do Inventor: https://herickchagas.com.br/pocket-inventor 🟩 Curso Fusion 360: https://herickchagas.com.br/curso-fusion-360

Cylinder Drawing

0 0 Beginner
Hydraulic Floor Jack's Cylinder Tutorial Drawing

Castor Nuts Drawing

0 0 Beginner
Hydraulic Floor Jack's Castor Nuts Drawing Tutorial

Autodesk Inventor

0 0 Beginner
Cankaya University Industrial Egineering student 'Future creators come with our creativity'