Tutorials

Onshape Tutorial Exersice

11 0 Intermediate
Sometimes you will not have Solidworks or a similar program installed on your computer. And you may have to make a model immediately. In such situations, Onshape is great. The link to the modeling file from the sample technical drawing is given below. https://cad.onshape.com/documents/51b10db64d8c10d69e04f4da/w/b4cd4b090cea13100d679675/e/741f8ec43a660ff55252cd29

Building Mini Morris Cooper

7 3 Expert
Insane detail level modeling this Mini Morris Cooper. Leave you comments and questions, I will be happy to answer.

volleyball in Onshape

4 0 Intermediate
I wanted to get to know Onshape better and had a look at the split, transform and pattern command. I repeated this in SolidWorks and it is the same workflow.

Junk sail boat | 3d modeling timelapse

3 0 Expert
Time lapse 3d modeling of a Junk Sail Boat. Feel free to leave you comments!

Onshape for Absolute Beginners

3 0 Beginner
https://youtu.be/2utLjjkXpIg

How To Create Chess Queen

3 1 Beginner
Chess Queen on OnShape

Volkswagen Van Type 23 | Time lapse

2 0 Expert
Here is a van that reminds to peace the Volkswagen Type 23.

KTM (Streetfighter )

2 0 Expert
Tuto n°61 - KTM (Streetfighter ) sur Autodesk Maya https://www.youtube.com/watch?v=8vGN83WWMIc

Bristol 450 2L. Time lapse modeling

2 0 Expert
Rare care that participate in Le Mans. Team: Bristol Aeroplane Co. Le Mans 24 Hours (June 11 - 12) Drivers: Peter S. Wilson & Jim Mayers

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.

Wheatley core

1 0 Beginner
a tutorial on how i made a personality core

How to change measurement units in Onshape?

0 0 Beginner
Video tutorial to learn how to change units in Onshape.

Dodge Panel Van | Time lapse

0 0 Expert
Here a mafia car, the Dodge Panel Van 1935.

turn 2d cylinder balusters to 3d model maya

0 0 Beginner
turn 2d cylinder balusters to 3d model maya

hand for doors or shelfs or beds cnc and 3d printing

0 0 Beginner
hand for doors or shelfs or beds cnc and 3d printing