Tutorials

Cap screws and machine screws

41 11 Intermediate
Cap screws and machine screws are similar in shape, differing only in their relative sizes. Machine screws are usually smaller in size, compared to cap screws. These are used for fastening two parts, one with clearance hole and the other with tapped hole. The clearance of the unthreaded hole need not be shown on the drawing as its presence is obvious. Figure 5.24 shows different types of cap and machine screws, with proportions marked Cap screws are produced in finish form and are used on machines where accuracy and appearance are important. As cap screws are inferior to studs, they are used only on machines requiring few adjustments and are not suitable where frequent removal is necessary. These are produced in different diameters, upto a maximum of 100 mm and lengths 250 mm. Machine screws are produced with a naturally bright finish and are not heat treated. They are particularly adopted for screwing into thin materials and the smaller ones are threaded throughout the length. They are used in fire-arms, jigs, fixture and dies. They are produced in different diameters upto a maximum of 20 mm and lengths upto 50 mm.

How to draw tangent arcs between two circles in AutoCAD?

22 4 Beginner
In this tutorial I am going to show you the easiest way to draw arc between two circles when you need specific radius.

How to create a block in AutoCAD?

18 5 Beginner
In my first tutorial on GrabCAD I will show you how to create Blocks in AutoCAD. It is nothing complicated so lets start.

Basic Command List AutoCAD

16 2 Beginner
Command List AutoCAD ~ Shortcuts

Project Manager

12 0 Expert
Hello, I have been working professionally on technical drawing and design since 1993 I have worked on a wide variety of projects. I am a freelancer Nice to talk and learn with everyone. f.sogukkuyu@gmail.com

How to export your file to PDF in AutoCAD?

10 2 Beginner
How to export your file to PDF in AutoCAD?

In One Video Auto-CAD Complete Course (2D) for Beginners & Advance | Mechanical, Civil,

9 0 Beginner
First Tutorial-This Courses upload by CADONE CENTRE (SOLIDWORKS EASY DESIGN). Upload complete courses step by step full commend. This tutorials Record in class room with student. so videos is long but you are easy to learn all commend with example. if u want a AUTOCAD 3D course then subscribe our channel and full complete course in class room with example. we are support get more information every week and days.

Valve

7 1 Expert
catia

How to insert a symbol in AutoCAD?(ø,°,Ω)

4 0 Beginner
Learn how to insert symbols in AutoCAD. This GrabCAD tutorial teaches you how to add phase symbols, diametar symbols and even a dia symbol!

AutoCAD Beginner's Guide

4 0 Beginner
Hey guys this tutorial mainly focuses on the basics of 2d drafting. You will get full info about the this CAD Software and will be able to draft any sketch in this software.

How to import a model from solidworks to autcad and do drafting

4 0 Intermediate
In this tutorial, we are going to explain how to import apart from solid works to AutoCAD and also in which file extension to be saved. https://youtu.be/fibTIQuF39o

How to combine multiple solids in AutoCAD?

4 0 Beginner
How to combine multiple solids in AutoCAD by using UNION tool.

How to optimize a CAD drawing in AutoCAD

3 0 Beginner
➤How to optimize a CAD drawing in AutoCAD? If you’ve been working on a file for some time, and you’ve noticed AutoCAD slowing down, then it may be worth doing a bit of a cleanup to help slim that drawing file down. ➤What is an optimized drawing and what are the benefits? An optimized drawing with a minimum amount of unnecessary data tends to perform faster, the drawing load time is significantly better and chances of drawing corruption also reduce to a great extent. ➤In this video I'll show you the most efficient ways of cleaning and optimizing your drawings in AutoCAD. ➤IT IS GOOD PRACTICE TO OPTIMIZE AND CLEAN YOUR DRAWING BEFORE IMPORTING IT INTO OTHER SOFTWARE LIKE REVIT, 3DS MAX ETC. ➤"Drawing Purge" Add-In download https://apps.autodesk.com/en/Publisher/PublisherHomepage?ID=200809200135043

Tutorial on AutoCAD Practice Design #26 | 2D Drafting

3 0 Beginner
In this AutoCAD video tutorial for beginners will guide you step by step to design the object.

How to insert an image in AutoCAD?

3 0 Beginner
Inserting an image in AutoCAD is simple so lets start.