Tutorials

Create an OBJ Cube With Your Favorite Images

17 2 Beginner
Ever wanted to create a CAD file with your favorite pictures? There are many ways to apply images and textures to CAD files. However, for most of these operations, expensive programs or CAD experience might be required. This tutorial shows you how to make a simple OBJ cube, while explaining some of the basic OBJ nomenclature. It then explains the steps to map pictures on the cube's faces. The only tools you will need is a text editor like notepad and your favorite images!

Use Ansys SpaceClaim to Model Twisted Pair Wire

1 0 Intermediate
Before I know how to do it, I cannot get any useful tips while I googling, it seems very hard. But it is very easy now. This tutorial will help you to model a simple twisted pair wire, for detailed twisted pair wire you can explore it by yourself. A model which modeled by this tutorial is in this linked page: https://grabcad.com/library/w-1930-1575-twisted-pair-wire-1.

How to make twisted bar

1 0 Beginner
It is not obvious to create twisted bar in SpaceClaim, e.g. for welded grating. I hope this lifehack will help You to make it in different cad programs. Как скрутить пруток в SpaceClaim, например для решетчатого настила. Подозреваю, что этот способ можно применять и в других программах.

S-shaped battery cooling geometry in ANSYS

0 0 Intermediate
Creating an S-shaped cooling geometry in ANSYS or any other simulation software requires a good understanding of fluid dynamics, heat transfer, and simulation tools. It may also involve several iterations to achieve the desired battery system cooling performance.

How To Design A Helical Spring using ANSYS 2022

0 0 Beginner
How To Design A Helical Spring using ANSYS