Tutorials

[VIDEO] Bending Plate Animation Inventor 2020 Tutorial

33 1 Intermediate
This tutorial will show how to create a bending process of a plate in animation, hope this video will give you clear explanation. please leave comment below

Robotic Tank Tread Assembly- Fusion 360 Tutorial (Tracked Robot Part 2)

10 3 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Buy this chain: https://amzn.to/3f2FZEl In this series, we will design and develop a tracked, tank-like mobile robot optimized for use on sand and in desert environments. The modeling of the treads, custom sprocket, idler rollers and 3D printed suspension system will be shown in great detail. We will first create the chain links themselves and the tread pieces, then pattern them along the shape of the loop. Once we finish this, we will create the custom sprocket and motor connection followed by the idler spindle and finally the suspension system. In the end, we can mirror our entire assembly to the other side to create the right side tread. Working on only one side at a time makes it easier on our computers and allows us to work faster with less lag-time.

Robotic Suspension System 4- Fusion 360 Tutorial (Tracked Robot Part 9)

6 0 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Robotic Suspension System 4- Fusion 360 Tutorial (Tracked Robot Part 9)

Inventor 2021 | Radial Engine

5 1 Beginner
Radial engine model created with Inventor. 3D Model. Art.

How to Package Electronic Components in Fusion 360: Tutorial

5 1 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360

How to Use Threaded Inserts in Your 3D Printed Parts- Example with DC Motor in Fusion 360

3 2 Beginner
This tutorial illustrates the modeling and use of threaded bras inserts in 3d printed parts and set screws to clamp down on DC motor flats.

Inventor 2021 | Radial Engine | Assembly 15

2 1 Beginner
In this video, I complete the assembly of the radial engine project. Parts used in this video are referenced below. Happy Modeling!

How to Make a DC Motor & Sprocket Assembly: Fusion 360 Robotics Tutorial for Beginners (Robot Part 3)

2 0 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 In this series, we will design and develop a tracked, tank-like mobile robot optimized for use on sand and in desert environments. The modeling of the treads, custom sprocket, idler rollers and 3D printed suspension system will be shown in great detail. We will first create the chain links themselves and the tread pieces, then pattern them along the shape of the loop. Once we finish this, we will create the custom sprocket and motor connection followed by the idler spindle and finally the suspension system. In the end, we can mirror our entire assembly to the other side to create the right side tread. Working on only one side at a time makes it easier on our computers and allows us to work faster with less lag-time. Buy this chain for projects: https://amzn.to/3f2FZEl

Inventor 2021 | Radial Engine | Assembly 12

1 0 Beginner
In this video, I demonstrate how to attach the intake and exhaust subassemblies, along with other parts to the crank subassembly of the radial engine project. Parts used in this video are referenced below.

Inventor 2021 | Radial Engine | Assembly 13

1 0 Beginner
In this video, we modify the cam housing part, and create the cam-housing sub-assembly of the radial aircraft engine project. Parts used in this video are referenced below. Happy Modeling!

Inventor 2021 | Radial Engine | Assembly 14

1 0 Beginner
In this video, I demonstrate the process of including the cam-subassembly and gears to the radial engine. Parts used in this video are referenced below. Happy Modeling!

Heavy Duty Truck Rack

1 0 Beginner
Create a Rack for F150 truck on Autodesk Inventor. -Create surface body part as main geometry. -Create a new assembly and place the surface body -Within the assembly create a new part and use the surface body as a reference to sketch the faces of the sheet metal part. -Use the Rip tool to create a seam and allow unfolding into flat pattern part.

Inventor 2021 | Radial Engine | Assembly 8

0 0 Beginner
In this video, we advance in the demonstration of the cylinder subassembly of the radial engine project. Video demonstrations to the parts used, can be found on my youtube channel linked in my profile. Happy Modeling!

Autodesk Inventor Tutorial - Pipe bending animation Part 3/3

0 0 Intermediate
This tutorial shows how to create pipe bending animation using Inventor Animation Studio. The video divided into 3 parts Part 1 https://youtu.be/VdT8J9F9UYU Part 2 https://youtu.be/dKLI8_ev0gY Part 3 https://youtu.be/bfqfRmUjk9k

Energy-Chain/Cable carier/Cable duct - Inventor 2021 Tutorial

0 0 Intermediate
This tutorial explains about creating Cable duct / energy chain in order this cable can be animated. The application usually in automation industries. #Inventor2021 #EnergyChain #InventorAnimation #Drive adaptivity #AdaptiveComponent #Adaptivesketch #Darkmode #Animation #igus Download the IGUS component here : https://www.igus.com/downloads