Tutorials

  • Design & CAD ×
  • BOM ×
  • Translations ×
  • NC Machining ×
  • FEM ×
  • Process Simulation ×
  • Other ×
  • AutoCAD Electrical ×
  • BobCAD-CAM ×
  • DraftSight ×
  • Lagoa ×
  • NX Unigraphics ×
  • OBJ ×
  • T-Flex CAD ×
  • Text file ×
  • how ×

Marine-style Prop

cmalco
in Modeling
3 0 Intermediate
This is an intermediate level design tutorial, geared towards the workflow of developing a 3-blade RH prop profile but may be used for developing other prop designs. As such, this tutorial is not so much dimensionally driven as it is, procedural in nature. You will no doubt have your own constraints to work within.
NX Unigraphics how marine unigraphics nx siemens design prop

How to pattern curve or shape in Siemens NX

Rinkesh Patel
in Modeling
2 0 Beginner
Hello viewers, As many of my viewers suggest me to publish tutorial of sketch. Here it is. Finally, this tutorial will helps those who is starting designing in Siemens NX9. This 5th part of Sketch video include following sub-commands of Sketch, and rest of sub-commands will be in next part. - Pattern Curve (No Shortcut) Have any queries? - comment on it. Like my videos if you are satisfied & for more videos, kindly Subscribe my channel. For any commercial discuss please visit www.rinkeshpatel.com Thank You.
NX Unigraphics circular linear curve pattern learning how tutorial unigraphics nx siemens

Trim Body, Split Body, Divide Face, Trimmed Sheet commands in Siemens NX

Rinkesh Patel
in Modeling
1 0 Beginner
This is the basic tutorials for beginners who are learning Siemens NX or NX Unigraphics for the first time, however this tutorials can be reviewed by those also who wanted to recover the every aspect of particular commands. I have listed all command below I am explaining in this video tutorial. This is first time I recorded this tutorial with vocal instructions. In this tutorial you will get introduced with following Master Features of Siemens NX9 specially, but you can use in any NX versions. - Trim Body - Split Body - Divide Face - Trim & Extend - Trimmed Sheet Have any queries? - comment on it. Like my videos if you are satisfied & for more videos, kindly Subscribe my channel. For any commercial discuss please visit www.rinkeshpatel.com Thank You.
NX Unigraphics design how learn tutorial sheet trimmed command face divide split body trim unigraphics nx siemens

How to draw Polygon, Ellipse, Conic in Siemens NX

Rinkesh Patel
in Modeling
1 0 Beginner
Hello viewers, As many of my viewers suggest me to publish tutorial of sketch. Here it is. Finally, this tutorial will helps those who is starting designing in Siemens NX9. This 4th part of Sketch video include following sub-commands of Sketch, and rest of sub-commands will be in next part. - Polygon (P) - Ellipse (No Shortcut) - Conic (No Shortcut) Have any queries? - comment on it. Like my videos if you are satisfied & for more videos, kindly Subscribe my channel. For any commercial discuss please visit www.rinkeshpatel.com Thank You.
NX Unigraphics learning shape conic ellipse polygon draw how tutorial unigraphics nx siemens

Basic Sketch Line, Rectangle, Arc, Circle, Point in Siemens NX

Rinkesh Patel
in Modeling
1 0 Beginner
Hello viewers, As many of my viewers suggest me to publish tutorial of sketch. Here it is. Finally, this tutorial will helps those who is starting designing in Siemens NX9. This 1st part of Sketch video include following sub-commands of Sketch, and rest of sub-commands will be in next part. - Profile (Z) - Rectangle (R) - Line (L) - Arc (A) - Circle (O) - Point (No Shortcut) Have any queries? - comment on it. Like my videos if you are satisfied & for more videos, kindly Subscribe my channel. For any commercial discuss please visit www.rinkeshpatel.com Thank You.
NX Unigraphics learning points type circle command arc rectangle sketch create how unigraphics nx siemens

How to use Chamfer, Fillet, Trim command in Siemens NX

Rinkesh Patel
in Modeling
1 0 Beginner
Hello viewers, As many of my viewers suggest me to publish tutorial of sketch. Here it is. Finally, this tutorial will helps those who is starting designing in Siemens NX9. This 2nd part of Sketch video include following sub-commands of Sketch, and rest of sub-commands will be in next part. - Chamfer (No Shortcut) - Fillet (F) - Quick Trim (T) - Quick Extend (E) - Make Corner (No Shortcut) Have any queries? - comment on it. Like my videos if you are satisfied & for more videos, kindly Subscribe my channel. For any commercial discuss please visit www.rinkeshpatel.com Thank You.
NX Unigraphics learning lines trim fillet command chamfer how tutorial unigraphics nx siemens

How to use Offset, Replace, Delete Face, Move Face commands in Siemens NX

Rinkesh Patel
in Modeling
0 0 Beginner
This tutorial will help you to use Synchronous Modeling Tools in Model Designing... In Part 1 following Tools are used : Offset Region Replace Face Delete Face Move Face Have any queries? - comment on it. Like my videos if you are satisfied & for more videos, kindly Subscribe my channel. For any commercial discuss please visit www.rinkeshpatel.com Thank You.
NX Unigraphics co-axial tutorials use how unigraphics nx siemens move face delete command offset

How to Mirror Curve or shape in Siemens NX

Rinkesh Patel
in Modeling
0 0 Beginner
Hello viewers, As many of my viewers suggest me to publish tutorial of sketch. Here it is. Finally, this tutorial will helps those who is starting designing in Siemens NX9. This 6th part of Sketch video include following sub-commands of Sketch, and rest of sub-commands will be in next part. - Mirror Curve (No Default Shortcut) Have any queries? - comment on it. Like my videos if you are satisfied & for more videos, kindly Subscribe my channel. For any commercial discuss please visit www.rinkeshpatel.com Thank You.
NX Unigraphics learning shape curve mirror how tutorial unigraphics nx siemens

HOW TO REVOLVE - EXPERT GUIDE

mehfooz ansari
in Modeling
0 0 Beginner
https://www.youtube.com/watch?v=YnIWMTHApu4
NX Unigraphics cad nx tip guide tutorial training face make expert revolve how

How to Offset Curve or shape in Siemens NX

Rinkesh Patel
in Modeling
0 0 Beginner
Hello viewers, As many of my viewers suggest me to publish tutorial of sketch. Here it is. Finally, this tutorial will helps those who is starting designing in Siemens NX9. This 6th part of Sketch video include following sub-commands of Sketch, and rest of sub-commands will be in next part. - Offset Curve (No Default Shortcut) Shift+ Selection of any lines = Deselect Have any queries? - comment on it. Like my videos if you are satisfied & for more videos, kindly Subscribe my channel. For any commercial discuss please visit www.rinkeshpatel.com Thank You.
NX Unigraphics learning curve offset how tutorial unigraphics nx siemens

How to Find Center of Mass | Get Projected Area | Siemens NX

Shuvam Kumar
in Modeling
0 0 Intermediate
In this video, you will learn to create the center of gravity or center of mass point which will link to our solid model if our model is updated then our center of gravity point will also update automatically. After that we will learn to calculate the projected area of Casting in nx and also learn to extract the projected surface. After that we will project the center of gravity point into the projected surface so that we will get point which we use for tie bar balance in Die Casting During Die Design. Projected sheet and projected in area will help us in Tonnage Calculation in die-casting. I hope you got to learn a lot from this video. If you want to watch NX tutorial and die-casting related videos from our channel then please subscribe to our channel ➡️https://bit.ly/2Ve1olC To Subscribe ➡️Recommended Playlist Die Casting Mould Design Theory ➡️https://youtube.com/playlist?list=PLqn1PG9MY7LjK08RSkCBC1jfdRYcR-BqU Die Casting Mold Base Design Step By Step | NX Mold Design ➡️https://youtube.com/playlist?
NX Unigraphics design cad master become calculation how object mass find gravity center nx casting area projected

NX CAD Tutorial-Bracket design in NX CAD

G.Ajithkumar
in Modeling
0 0 Intermediate
In this video one can learn how to design any bracket for any applications. Nx widely gives a range of options and flexibilty in modeling and you can learn how to use them effectively for your work. Hope everyone is safe and doing well. Stay tuned for further updates regarding the next videos. subscribe to Learn IT design for more updates.
NX Unigraphics design bracket draw how modelling beginners modeling tutorials cad nx

How to use Geometric Constraints part 1

Rinkesh Patel
in Modeling
0 0 Beginner
Hello Designers, As many of my viewers suggest me to publish tutorial of sketch. Here it is. Finally, this tutorial will helps those who is starting designing in Siemens NX9. This is the 1st part of Sketch Geometric Constraints video includes following sub-commands of Geometric Constraints, and rest of sub-commands will be in next part. - Vertical - Horizontal - Perpendicular - Parallel Have any queries? - comment on it. Like my videos if you are satisfied & for more videos, kindly Subscribe my channel. For any commercial discuss please visit www.rinkeshpatel.com Thank You.
NX Unigraphics horizontal constraints vertical how tutorial unigraphics nx siemens

How to use Geometric Constraints part 3

Rinkesh Patel
in Modeling
0 0 Beginner
Hello Designers, As many of my viewers suggest me to publish tutorial of sketch. Here it is. Finally, this tutorial will helps those who is starting designing in Siemens NX9. This is the 3rd part of Sketch Geometric Constraints video includes following sub commands of Geometric Constraints, and rest of sub commands will be in next part. - Tangent - Concentric - Equal Length - Equal Radius Have any queries? - comment on it. Like my videos if you are satisfied & for more videos, kindly Subscribe my channel. For any commercial discuss please visit www.rinkeshpatel.com Thank You.
NX Unigraphics radius length equal concentric tangent constraints geometric use how tutorial unigraphics nx siemens

Bolt standard part design in Nx CAD in industry level|nowhere available in any tutorial site!

G.Ajithkumar
in Modeling
0 0 Expert
In this tutorial one can learn how to design a bolt as a standard parts in industry level modeling approach. Bolts are used for making the temporary joints with the mating parts. Please share this tutorial to your friends as this is relevant and helpful to job seeking candidates as well as for freshers. Subscribe to Learn IT Design YouTube channel for more tech videos and design related topic videos.
NX Unigraphics how unigraphics tutorials beginners tutorial cad nx bolts design bolt
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.