Tutorials

Autodesk Fusion 360 Tutorial - How to Set the Orthographic Projection

0 0 Intermediate
This tutorial is about how to set the orthographic projection on Autodesk Fusion 360. This feature is updated on October 28, 2018.

BEVEL GEAR USING FUSION360 - LOFT

33 0 Beginner
here you can how to create a bevel gear using simple steps in fusion 360

Autodesk Fusion 360 Tutorial - How to Draw the Assembly and Its Components on the Same Sheet

0 0 Intermediate
We can draw the assembly and its components on the same drawing sheet. It is able to be applied by unchecking some component of assembly on drawing browser. We apply the balloons and the parts list table for drawing the assembly. We apply center mark, centerline, section view, and dimension for drawing the components.

Model a Screw in Fusion 360! Tutorial for Absolute Beginners: Introduction to Sketch Modeling

7 0 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 In this tutorial we will be modeling a screw in Autodesk Fusion 360. We will learn to use the: 0:26 Sketch 3:48 Revolve 4:25 Cut Extrusion 5:04 Polygon Tool 7:12 Thread Tool 13:50 End Chamfer on Screw Threads

Autodesk Fusion 360 - Sketch - Швидко та легко

8 1 Intermediate
-Цей короткий путівник по роботі у Fusion 360 заборонено перекладати на російську мову, робити рерайти або публікувати на сторонніх ресурсах інформації без згоди автора. Даний туторіал посвячений тільки роботі з інструментами креслення. По мірі написання уроків, буду добавляти окремі Tutorials по роботі з твердотільним моделюванням та роботі з листовим металом. -Автор усіх матеріалів - Рисан Василь Васильович, м.Івано-Франківськ, Україна. -e-mail: Ifin3d.info@gmail.com -instagram: https://www.instagram.com/ifin3d/ -facebook: https://www.facebook.com/akeyro95

Fusion 360 Tutorial for Absolute Beginners: Introduction to Basic Sketch Modeling (2020) Part 1

14 0 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Introducing Autodesk 360! In this beginner lesson tutorial, we will learn the basics of creating 1D lines, which create 2D shapes and eventually 3D parts. We will explore the sketch tool, rectangle and extrusion tools, then the revolve tool to create 3D parts.

[VIDEO] Fusion 360 Tutorial - Twist Loft

17 0 Beginner
This tutorial explain how to use Loft with twist effect. for the model i used the IVNGWC 2009-02 drawings. thanks

3D Printed Raspberry Pi Case Fusion 360 Tutorial

8 0 Beginner
#3DPrinted #3DPrinting #RaspberryPi

Tesla Cybertruck in Fusion 360!

11 1 Beginner
#CyberTruck #TeslaCyberTruck #Tesla Model a block shaped like the Tesla Cyber Truck (what it appears to look like from photos). This tutorial is "just for fun" and is very unlike all of the other tutorials on this channel. I butchered it...

Robotic Tank Tread Assembly- Fusion 360 Tutorial (Tracked Robot Part 2)

11 3 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Buy this chain: https://amzn.to/3f2FZEl In this series, we will design and develop a tracked, tank-like mobile robot optimized for use on sand and in desert environments. The modeling of the treads, custom sprocket, idler rollers and 3D printed suspension system will be shown in great detail. We will first create the chain links themselves and the tread pieces, then pattern them along the shape of the loop. Once we finish this, we will create the custom sprocket and motor connection followed by the idler spindle and finally the suspension system. In the end, we can mirror our entire assembly to the other side to create the right side tread. Working on only one side at a time makes it easier on our computers and allows us to work faster with less lag-time.

Intro to Drawings - Fusion 360 Part 2: Dimensional Tolerances, Threads & Alternate Dimensions How To

0 0 Beginner
Intro to Drawings - Fusion 360 Part 2: Dimensional Tolerances, Threads & Alternate Dimensions How To

{​VIDEO}​ How to Route Electrical Cables & Twist Wires in Fusion 360

21 0 Beginner
How to Route Electrical Cables & Twist Wires in Fusion 360: [Please Thumbs Up!]

Autodesk Fusion 360 Tutorial - How to Use Diameter Dimension on Sketching

0 0 Intermediate
This tutorial is about how to use "Diameter Dimension" menu on Autodesk Fusion 360 Sketching. This feature is updated on October 28, 2018.

surface design in fusion 360

4 1 Beginner
here you can find how to use surface revolve and trim in patch using fusion 360

How to Use Threaded Inserts in Your 3D Printed Parts- Example with DC Motor in Fusion 360

3 2 Beginner
This tutorial illustrates the modeling and use of threaded bras inserts in 3d printed parts and set screws to clamp down on DC motor flats.