Tutorials

  • Tooling ×
  • Other ×

Activate SolidWorks 2017 RealView Graphics on an Intel CPU

Danny Bichard Design
in Other
14 13 Intermediate
Activate RealView Graphics on an unrecognised Intel graphics card, e.g. my Intel(R) HD Graphics 620 card on my Lenovo IdeaPad 320 laptop.
cpu 620 card graphics intel realhack realview solidworks

Free Download IES Light File Vray Sketchup

tsantoid
in Other
0 0 Intermediate
Free Download IES Light Collection Vray Sketchup
light ies free 3dsmax sketchup vray

Adjust Depth of Field using Depth Map- Photoshop

Ananth Narayan
in Other
8 3 Beginner
In this tutorial I am going to explain to dynamically control depth of field using Depth Map. Also at the end of this tutorial I will explore a cool Facebook trick. Links for keyshot file, images are available at end of this tutorial.
facebook 3d map dof field depth keyshot photoshop

Ejection System of an Injection Mold

Murali K
in Tooling
3 0 Beginner
Ejection is a process of removing the plastic material from the mold. This are of different types to remove the material from mold. EJECTION TECHNIQUES: • PIN EJECTOR: • Simplest and most economical method . • Location and number of ejector pins depends on component shape and size. D-SHAPED EJECTOR PIN : • Flat sided ejected pin. • Made by machining of flat on standard ejected pin. • BLADE EJECTOR : • Basically a rectangular ejector pin. • Slender parts such as ribs are ejected by this method. • SLEEVE EJECTOR: • Molding by means of hallow ejector pin or sleeve. • Ejections of small cylindrical Molding. • Provide positive ejector around a local core pin in forming and hole in the mold. • VALVE EJECTOR : • Large diameter ejector pin. • Used for ejections of large component. • Ejector applies ejector force on to the inside surface of the molding • AIR EJECTOR: • Ejector force is supplied by compressed air. • STRIPPER BAR EJECTOR: • Ejector element pushes against the bottom at the molding. • Effective area of ejection is greater. • Suitable for walled box type moldings. • STRIPPER PLATE EJECTOR: • Mold adopted for ejecting circular box moldings with thin wall sections.

How to Fix Thumbnails Not Appearing in SketchUp

tsantoid
in Other
1 2 Beginner
causes and how to fix thumbnails do not appear in sketchup pro 2017
with modeling beginner pro sketchup

How to save your animations as GIFs in SolidWorks

Yahya T Khedr
in Other
32 3 Intermediate
Do you want to know how to make GIFs of your animations? Ever asked yourself how they did it? Here I'll show you how to make seamless GIFs from your animations using SolidWorks, as well as PhotoScape... I chose PhotoScape as it has decent results, doesn't cause any bumping & - most important - is for free. You can download the latest version from here: http://www.photoscape.org/ps/main/download.php
animation render software photoscape rendering photoview gif solidworks

التعريف بالقلوظة | إستخداماتها | أنواع ذكور القلاووظ و إعتبارات هامة

Ayman Kidwany
in Tooling
1 0 Intermediate
سلسلة القلاووظ - الجزء الأول

How to make 3D posts of your models on Facebook

Yahya T Khedr
in Other
18 4 Beginner
Facebook has just updated their new feature that enables 3D viewing in posts... This feature has been around for some time, but the new update supports the industry-standard glTF 2.0 file format. This allows us to share 3D content on Facebook, whichever the designing software used was. Here I'll show you how to turn your 3D files into GLB, the only extension Facebook reads till now. By the way, GLB file format is a binary form of glTF that includes textures instead of referencing them as external images, so don't worry about the output's quality.
gltf posts solidworks glb viewing 3d facebook

How to use Grabcad

Usman Akhtar
in Other
5 0 Beginner
Video Tutorial to download absolutely free cad model files in your hard drive, how to use grabcad website to download cad models. Follow me on Grabcad : grabcad.com/usman.akhtar-3 About this Channel Here you will find Videos Related to 1. SolidWorks 2. Hydro Power 3. FYP Designing and Manufacturing. 4. Electrical Engineering 5. 3D Printing 6. Low RPM Alternators 7. Manufacturing of Hydro Turbines Subscribe to this channel for all updates mentioned above. SolidWorks Complete Learning Step by Step from Basics to Advanced Level: https://www.youtube.com/playlist?list=PLJR3qNZXHShwwR3BJzyv-5-Woled6n9KR Urdu / Hindi SolidWorks Learning : https://www.youtube.com/playlist?list=PLJR3qNZXHShze-ZcfiGpsMjzfLY2e9Pyk Want me to Design Project for You??? Contact Me My Facebook id: https://www.facebook.com/usman.akhtar.5 My Page link: https://www.facebook.com/solid.online.Training
grabcad use how

Feeding System of an Injection Mold

Murali K
in Tooling
4 0 Beginner
The function of the mold feed system is to make the high temperature melt under high pressure go into the mold cavity to fulfill that. The style and quantity of gate and feed style often determine the specifications of plastic mold base. Whether the design of the gate system is reasonable will directly affect the appearance, internal quality, dimension precision and molding cycle of the molded plastic parts. Concept and classification of feed system The feed system of the mold is a section of the melt flowing passage from the nozzle of the injection molding machine to the cavity; it can be divided into two main types: cold runner system and hot runner system. Ordinary the cold runner system is also divided into the side gate system and point gate system. The gate system is composed of the main runner, sub-branch runner, the cold material well and the gate. The hot runner system has no main runner and sub-branch runner. The melt passes through the manifold plate and the hot nozzle directly from the gate into the cavity. Design principle of feed system The design of feed system should follow the principles. (1) Ensure the appearance quality of the products.Any gate will leave traces on the surface of the product, thus it will affect the surface quality. In order to not affect the appearance of the product, design should try to set the gate in the invisible parts of the product. If it is impossible, the gate should be easily removed, and after the removal, the left traces should be the minimum. (2) Ensure the quality of the product.The style and quantity of the gate should be reasonable, which need ensure that the plastic melt quickly fill the cavity and the pressure and heat loss are reduced. The internal organization of products is fine. The design of the gate system should prevent the defects of the products, like the shrinkage mark, short filling, flash, poor weld line, residual stress, deformation, uneven shrinkage, jetting, drooling, resin degradation and other defects. The gate system should be able to smoothly guide the molten plastic to fill cavity in every corner, so that the gas can be discharged, avoiding the bubbles by trapped air. The feed system should collect the melt material of the low temperature, prevent its entering the cavity and affect the quality of the products. The gate and runner system are arranged balanced possibly. Melt plastic can be evenly filled in each cavity, so that the shrinkage rate of each cavity is uniform. The good feed system design could improve the size accuracy of the plastic parts, and ensure the injection part to be interchangeable. (3) The minimum flow resistance.Flow path of the melt plastic should be as short as possible, turning should be reduced and the cross-sectional area of the runner should be reasonably. the appropriate cross-sectional area should be small. The reason is; increasing the small to the big is simple, but the contrary is hard; The small runner reduces the proportion of waste material.; The circular melt can fill the cavity in the shortest time to shorten the molding cycle and improve the productivity of the mold; The less air in the feed system would reduce the venting burden of the plastic mold If The temperature and pressure loss of the melt in the flow channel are small, the molding quality of the product is easy to guarantee. (4)Not affect the automatic production.If the mold is designed for the automatic production, the feed system (runner and gate) should be able to fall off automatically. Contents and steps of the feed system design The design procedure and content are as follows. (1) The type of the gate system. According to the structure, shape and size of the product, they would decide its filling process, like the side gate system, the point gate system or the system without runner, and then determine the adoption of mold base. (2) The design of the gate.According to the structure, size and appearance of the product, determine the form, location, quantity and the size of the gate. (3) The dimensions and locations of the main runner (4) Design of branch runner.According to the structure, size and variety of the products, the shape and cross-section of the branch runner are determined. (5) Design of assistant runner.According to the follow-up process or the structure of the product, determine whether to design the assistant runner, and its Shape and size: (6) Design of cold material well.According to the length of the sub runner and the structure of the product, determine the location and size of the cold material well.

External Text Files to Control Variables/Equations in SolidWorks

Kelly Harward
in Other
6 8 Beginner
External Text Files to Control Variables/Equations in SolidWorks
dimensions modifying files text external variables equations

Types of Combat Bots

Erin Hall
in Other
6 6 Beginner
This tutorial is an overview of the types of combat bots and introduces what it takes to make an effective beetleweight bot. Modified from the work of previous BattleBots leads and aspects of the BattleBots Bible (RioBotz Combot Tutorial 2.0). Includes links/photos from the BattleBots website highlighting example bots.
asme battlebots

How to make a stainless steel effect in vray sketchup

tsantoid
in Other
1 0 Beginner
This tutorial will tell you an easy way to make an iron or aluminum effect on a vray rendering machine
vray lighting interior sketchup

How to 3D Print Jigs & Fixtures, Part 3: Advanced Features and Advanced Materials

Shuvom Ghose
in Tooling
15 4 Expert
Building on parts 1 and 2 of the series, this tutorial takes you through an ENTIRE agile design cycle for a real fixture we needed in our office, exploring the use of DFAM, advanced infill techniques to save printing time and finishing by going through a material selection process to print in one of the stiffest materials out there- Nylon 12 Carbon Fiber! It's a total, soup-to-nuts, fixtures tutorial!
fiber dfam stratasys fdm advanced carbon fixture

Free Internship for Mechanical Engineers

PRASANNAKUMAR SHANKAR
in Tooling
8 3 Beginner
Dear mechanical engineers, Greetings! Sub: Free Internship for Mechanical Engineers. If you are a fresher and looking out for jobs, this online internship course is a must. Prefinal and Final year mechanical engineering students interested in internships, this course is also for you. You need to study the videos, prepare an internship report, and submit it to us. We will check your report and approve it. Once the report is approved, you will get a soft copy of the certificate.
free internship for mechanical engineers design mechanical engineering internship catia v5 catia press tool design
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.