Tutorials

Static Simulation in Fusion 360! Bicycle Crank Arm Tutorial

5 0 Beginner
0:25 Simulation Start 0:56 Simplify 1:31 Materials 2:02 Constraints 2:58 DOF View 3:23 Loads 4:52 Solve In this tutorial, we will create a static simulation for our bicycle crank arm in Autodesk Fusion 360. We will simplify our assembly, to remove the fittings, then add a material, constraints and a load to the end of the arm. When we solve our assembly, we will end up with the amount of deformation. We will then run the simulation again once we core out the inside of our crank arm to see the difference in the analysis.

Static Stress Simulation: I-Beam Bending in Fusion 360! Tutorial

3 0 Beginner
How to do a static stress simulation on an I-beam in Fusion.

Fusion 360 Thermal Simulation Tutorial- Loads and Constraints Coffee Mug Part 2

2 0 Beginner
#Coffee #ThermalConduction #ThermalSimulation Music is from Youtube free library. -This is a thermal load simulation.

Torus Pipe Analysis

0 0 Intermediate
This video explains the Torus Pipe Analysis.

Testing Open Source CAD Import: Fea/CFD

0 0 Beginner
Hi, I am testing open source CAD import for open source FEA & CFD. Acoustics, Bio-Medical, Vehicle CAD for Dynamics such as Off Road Vehicles, etc. I need interesting CAD test cases for everything from acoustics of animals to off road high speed impact. All I need is that the CAD is stitched up when possible. STL is very tricky to convert to solids sometimes but there are work arounds. Pretty much there are 2 levels: 1. Highly representative CAD test cases, but simple, for multi-physics quick what if tests, could be coupled CFD into Mechanical FEA. For example, super clean CAD of 2 gear teeth on a shaft meshing. and 2. Very complex CAD but super clean with no gaps for the Bigger Picture complex analyses. For example, how much computer power do we need to solve more complex large CAD models. More interested in mechanical design but my hobby is the CFD and acoustic analyses of fish swimming. Hundreds of millions of years taught the sharks far more than we know, may be? Very Grateful for any test cases you are happy to share. I am looking for perfect CAD please. Thanks, Simon. I used to be sjs_Fish1 but lost my log in.

How to do thermal ands static simulation on cantilever and Simply Supported Beam

0 0 Beginner
Hello everyone, in this simple short video, i've shown a process of using static and thermal stress simulation using Autodesk Fusion 360 . and there are somethings in the model which i overlooked as this tutorial is meant for beginners, so i've tried to keep it very simple. so follow the video till last.