Tutorials

  • Assemblies ×
  • Standards ×
  • Snagit ×
  • Geomagic Design ×
  • Powershape ×
  • Pro/Engineer Wildfire ×
  • SpaceClaim ×
  • GrabCAD Print ×

How to FDM Print for Part Sliding Clearance

GrabCAD Tutorials
in Assemblies
13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!
GrabCAD Print sliding clearance printing 3d fdm

How to use Welding

Vladimir Palffy
in Assemblies
4 0 Beginner
In the ProE and Creo is possible to create different types of Welds. System automatically calculate with used materials and Weld process. This information is possible to show in the Weld symbol and drawings.
Pro/Engineer Wildfire welding

Stacking Your Parts in Z for FDM

Stratasys
in Assemblies
2 0 Intermediate
Have long thin flat parts you’ve always wanted to print right on top of each other in FDM but the slicer never allowed you to? Learn how to use this exclusive new feature in GrabCAD Print Pro!
GrabCAD Print fdm stacking stratasys 3d printing software grabcad print pro

Smoking Shelter

David Crosby
in Assemblies
1 0 Intermediate
Building the smoking shelter. I have full workshop drawings for making all of the parts. Contact me at gbm60@hotmail.com if you are interested in making the first real one.
Pro/Engineer Wildfire shelter smoking

GrabCAD Print Pro™ - Per Part Groups For Service Bureaus

Stratasys
in Assemblies
1 0 Expert
The premium version of GrabCAD Print™, GrabCAD Print Pro™ is now available! This version includes new & enhanced features. This tutorial will explain per part estimation & assembly grouping!
GrabCAD Print part estimation assemblies grabcad print pro 3d printing software grabcad print

JP_005_GrabCAD Print: 部品摺動部の隙間をＦＤＭ造形する方法

Stratasys Japan
in Assemblies
0 0 Intermediate
造形後にはめ合わせるまたは摺動（スライド）させる必要がある部品を3D造形する場合、CADシステムで該当する部品の間にある程度の隙間を設ける必要があります。目安として、造形する際の積層ピッチの2倍の隙間から始めるとよいでしょう。ただし、小さいサイズで何度かテスト造形を行い、積層ピッチの2倍の法則が特定の状況や向きに当てはまるかを確認することをお勧めします。それでは3Dプリンタで楽しくモノづくりをしていきましょう！
GrabCAD Print fdm 3d printing clearance sliding
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.