Tutorials

  • Drafting ×
  • Tooling ×
  • Autodesk Inventor ×
  • JT ×
  • PTC Creo Parametric ×
  • TinkerCAD ×

Creating a 2D Drawing in Creo Paramatrics

Zulfiqar Ali
in Drafting
1 0 Beginner
In this tutorial you will learn to create a 2D drawing in Creo paramatrics. Serving on Fiverr Now: https://www.fiverr.com/dxhunzai/design-and-render-3d-models-in-solidworks-and-creo https://www.fiverr.com/dxhunzai/solve-any-problem-of-mechanical-engineering
PTC Creo Parametric parametric 2-0 creo

Cap screws and machine screws

dea
in Drafting
65 12 Intermediate
Cap screws and machine screws are similar in shape, differing only in their relative sizes. Machine screws are usually smaller in size, compared to cap screws. These are used for fastening two parts, one with clearance hole and the other with tapped hole. The clearance of the unthreaded hole need not be shown on the drawing as its presence is obvious. Figure 5.24 shows different types of cap and machine screws, with proportions marked Cap screws are produced in finish form and are used on machines where accuracy and appearance are important. As cap screws are inferior to studs, they are used only on machines requiring few adjustments and are not suitable where frequent removal is necessary. These are produced in different diameters, upto a maximum of 100 mm and lengths 250 mm. Machine screws are produced with a naturally bright finish and are not heat treated. They are particularly adopted for screwing into thin materials and the smaller ones are threaded throughout the length. They are used in fire-arms, jigs, fixture and dies. They are produced in different diameters upto a maximum of 20 mm and lengths upto 50 mm.
Autodesk Inventor screw cap

Flat Pattern of Sheet Metal Component in Creo Drawings

jehan kothari
in Drafting
0 0 Intermediate
It is somewhat tricky as how to add flat pattern of Sheet Metal Component in Creo Drawings. Check out this video :)
PTC Creo Parametric drawing parametric creo pattern flat metal sheet

Adding Drawing view Names automatically w/req formatting in Creo

Kulbir Sandhu
in Drafting
0 0 Intermediate
In the drawing, when you need to show view label only with single view name, not the duplicating name, you can use the setting as described in this video. In this, you would learn: 1. Formatting View Label to Simplified one. 2. Set the required config settings, 3. Set the required Drawing detail options 4. The advantage of using Aux view in respect of view label.
PTC Creo Parametric options detail drawing settings configuration label view

Project Manager

3D Machine and Technologies by Ferhat
in Drafting
12 0 Expert
Hello, I have been working professionally on technical drawing and design since 1993 I have worked on a wide variety of projects. I am a freelancer Nice to talk and learn with everyone. f.sogukkuyu@gmail.com
Autodesk Inventor

How to create BOM table from the scratch

Vladimir Palffy
in Drafting
1 0 Beginner
A few simple steps and you ill know all about Repeat region in Creo - you will know How to manage BOM and BOM positions
PTC Creo Parametric positions manage bom create how creo region repeat

[EPS 04] Cara membuat Etiket Gambar Teknik | Autodesk Inventor

Suryo Puji Buwono
in Drafting
3 0 Beginner
Cara membuat Etiket Gambar Teknik dengan Autodeks Inventor
Autodesk Inventor teknik gambar e-tiket

CAD I CAM I CAE I BIM Tutorial

Tashamjar Guruji
in Drafting
2 1 Beginner
Welcome to SS e Academy.com Now Tutorial Creo Parametric 5.0 You have more learn CAD I CAM I CAE I BIM Software Tutorial In www.SSeAcademy.com
PTC Creo Parametric creo revit autocad cae cam cad

Having the problem when show annotation model used in the drawing

Mohit Saxena
in Drafting
1 0 Beginner
"Having the problem when show annotation model used in the drawing"
PTC Creo Parametric

How to Create Full Unfold Cross Section

Vladimir Palffy
in Drafting
2 0 Beginner
In this video, you can see the logic or explanation - How Xsec Full(Aligned) and Full(Unfold) works - you need to select Axis for this type of section or not.
PTC Creo Parametric section cross

Remove Ghost object from drawing

Vladimir Palffy
in Drafting
0 0 Beginner
In this tutorial, you can learn How to Remove Ghost objects from drawing - not stored ghosts anymore in PDM system
PTC Creo Parametric remove objects ghost

How to create cross sections

Vladimir Palffy
in Drafting
1 0 Beginner
In this tutorial, you can learn How to create cross sections - full and local
PTC Creo Parametric tutorial creo sections cross

Autodesk Inventor Tutorial Adding colour

Vikash Kumar
in Drafting
0 0 Beginner
https://www.youtube.com/watch?v=iickqMM7mV0
Autodesk Inventor metarial rendering color

Model-based definition (MBD) and GTOL with Creo 5.0

Vladimir Palffy
in Drafting
0 0 Beginner
In this tutorial, you can learn How to create GTOL (geometric tolerances) and dimensions based on Model-based definition (MBD) with Creo Parametric 5.0
PTC Creo Parametric definition model-based

TYPES OF LINE IN CREO PARAMETRIC

abdul lateef
in Drafting
0 0 Beginner
Learn types of lines and how to draw them in creo parametric.
PTC Creo Parametric parametric creo types line
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.