Tutorials

Tutorial: how to model revolving surfaces without degenerated point

12 2 Intermediate
This tutorial shows how to reconstruct a portion of a revolving surface, in order to remove the degenerated point

Filling basic 6-sided holes in Rhino

8 1 Beginner
This tutorial shows how to fill a 6-sided hole surrounded by simple planar surface transitions in Rhino.

Make a Ring With Text in Rhino

7 1 Expert
Make a ring with a text

FREE Autodesk Alias Tutorial Day 1

8 0 Beginner
Education should be free... A friend, a collegue and like myself Adrian is an expert Alias modeller with extensive years of experience working with OEM design studios https://www.youtube.com/c/AdrianAutodeskAlias @a.biggins.design I will begin to upload tutorials that will teach you from the moment you open Alias for the first time, setting Alias up for efficient work flow and together build a full exterior CAS model and render it. In my opinion this is as close as you can get to seeing the work flow and theory we work towards within OEM studios day to day.

Video Tutorials from Rhino 3D Tutorials

6 0 Beginner
A series of little tutorials made available on my Youtube channel. For more detailed Rhino 3D tutorials here's the link https://rhino-3d-classes-from-beginner-to-advanced-lev.teachable.com/

how to model a car in autodesk alias????

5 3 Intermediate
Surface modeling Aston Martin One-77 in the Alias surface from AUTODESK

GIF : Guide to How to make Simple Single Collet ( Emerald Ring )

5 0 Intermediate
THE SERIES OF ANIMATED gif WILL GUIDE IN MAKING SIMPLET GRACEFUL RING.

The Length And Width Of A Ring .

4 0 Expert
How to measure the length and width of a ring . https://www.youtube.com/watch?v=0zKmm4ZYi10

Introduction to Pave setting, and its basic knowledge.

4 0 Expert
What a Pave Setting Is The pavé setting, pronounced “pa-vay,” comes from the French word “to pave,” as in paved with diamonds. By closely setting small diamonds together with minimal visibility of the tiny metal beads or prongs holding the stones in place, the effect is one of continuous sparkle.

How to model the StMary30st in Rhinoceros3D and show design intent.

4 1 Beginner
Here my explanation on how to do

starlord Tutorial - image Pixel [ sampler ] with Rhino + Grasshopper

4 0 Intermediate
éste es un Tutorial para convertir una imagen en geometrías tipo Pixel this is a Tutorial to convert an image into Pixel geometries Regards! subscribe! MATGICAL@blogspot.com f DigitalMagical magicaldigital Ig

A Class OEM standard modelling and skills

4 0 Beginner
I have created a number of Tutorials for Autodesk Alias A Class Nurb modelling. These tutorials are based on things i do everyday as a professional car designer within OEM studios. Although these are done in Autodesk Alias which is the industry standard software they can be applied to any nurb based program you may have such as Rhino, Catia etc. 1. Scan data to A Class surface model 2. From a side view sketch to a clean concept model 3. Using blueprints to create a clean accurate A Class model 4. Using these skills to challenge yourself.

How do i add thickness to a polyline in Rhinoceros 3D

3 2 Intermediate
hi https://grabcad.com/mark.goody-2, following picture can guide you to add thickness to any curves by adding few simple steps while modelling.

Make a Motorcycle in TinkerCAD

3 0 Beginner
Design a motorcycle in TinkerCAD. Step by Step instructions that are written for middle school aged students. If you have dual screens, watch on one, complete on the other. Otherwise, watch a little, then do a little. If you make something awesome, share an image @HLModtech on Instagram, Facebook or Twitter.

Filling 6-sided holes in Rhino

3 0 Intermediate
This tutorial shows how to fill a 6-sided hole surrounded by complex surface transitions in Rhino.