Tutorials

  • Tooling ×

How to Create a Mold Using SolidWorks

Sérgio CAD CAM
in Tooling
16 0 Beginner
How to Create a very, very simple Mold Using SolidWorks, step by step.
3d cad solidworks injecao injection molde mould mold

TUTORIAL MOLD 01

Sérgio CAD CAM
in Tooling
15 0 Beginner
TUTORIAL HOW TO CREATE A MOLD IN SOLIDWORKS, STEP 1: SCALE AND DRAFT ANALYSIS; TUTORIAL DE COMO CRIAR UM MOLDE NO SOLIDWORKS, PRIMEIRO PASSO, DEFINIR A CONTRAÇÃO (ESCALA) E ANÁLISE DE INCLINAÇÃO DO PRODUTO. CREDITS TO https://grabcad.com/library/plastic-tray-9 BY https://grabcad.com/ashok.kumar-64
solidworks molde mould injection mold tutorial

How to 3D Print Jigs & Fixtures, Part 3: Advanced Features and Advanced Materials

Shuvom Ghose
in Tooling
15 4 Expert
Building on parts 1 and 2 of the series, this tutorial takes you through an ENTIRE agile design cycle for a real fixture we needed in our office, exploring the use of DFAM, advanced infill techniques to save printing time and finishing by going through a material selection process to print in one of the stiffest materials out there- Nylon 12 Carbon Fiber! It's a total, soup-to-nuts, fixtures tutorial!
fiber dfam stratasys fdm advanced carbon fixture

Learn to create simple BOLT in AutoDesk Inventor

sherwin reforsado
in Tooling
9 0 Beginner
This video is not mine, copyright to the owner CAD CAM TUTORIAL
coil chamfer fillet intersect join extrude sketch part new create how learn

Free Internship for Mechanical Engineers

PRASANNAKUMAR SHANKAR
in Tooling
8 3 Beginner
Dear mechanical engineers, Greetings! Sub: Free Internship for Mechanical Engineers. If you are a fresher and looking out for jobs, this online internship course is a must. Prefinal and Final year mechanical engineering students interested in internships, this course is also for you. You need to study the videos, prepare an internship report, and submit it to us. We will check your report and approve it. Once the report is approved, you will get a soft copy of the certificate.
free internship for mechanical engineers design mechanical engineering internship catia v5 catia press tool design

Coupler 5x8mm

Edson Joao
in Tooling
8 0 Beginner
5x8 coupling for nema motor

Injection Mold Design

Murali K
in Tooling
8 0 Beginner
Most of the products we design are now a days made of plastics and majority of the plastics parts are only injection molded. So why not we understand the injection molding process and know about the injection mold design before we attempt to design products. (Any comments, suggestions and questions are always welcome.) Murali. K (Injection Mold Designer) (murali.molddes@ gmail.com)

PLASTIC BOX: SolidWorks / KeyCreator

Manolo Valenzuela
in Tooling
6 1 Beginner
See video: https://www.youtube.com/watch?v=wO9Oajq64UM&ab_channel=ManuelValenzuela
mold box plastic nx catia inventor solidworks keycreator

It is a simple plastic mold release method.

Yalçın CAN ( YOUR CONFIDENCE )
in Tooling
5 2 Intermediate
It is a simple plastic mold release method. In order to create a simple plastic mold, the model must first be completed. Mold separation line is determined in accordance with the model. Then, as shown in the picture, a female mold is created. After the creation of a female mold, a male mold is created. At the end, the pusher pins are placed to remove the part remaining in the male mold in accordance with the model and the process is completed. These processes are also very simple for mold creation. You can review other models and patterns on my page and use these examples. My request from you is that you like my models while downloading.
method molding plastic simple

Feeding System of an Injection Mold

Murali K
in Tooling
4 0 Beginner
The function of the mold feed system is to make the high temperature melt under high pressure go into the mold cavity to fulfill that. The style and quantity of gate and feed style often determine the specifications of plastic mold base. Whether the design of the gate system is reasonable will directly affect the appearance, internal quality, dimension precision and molding cycle of the molded plastic parts. Concept and classification of feed system The feed system of the mold is a section of the melt flowing passage from the nozzle of the injection molding machine to the cavity; it can be divided into two main types: cold runner system and hot runner system. Ordinary the cold runner system is also divided into the side gate system and point gate system. The gate system is composed of the main runner, sub-branch runner, the cold material well and the gate. The hot runner system has no main runner and sub-branch runner. The melt passes through the manifold plate and the hot nozzle directly from the gate into the cavity. Design principle of feed system The design of feed system should follow the principles. (1) Ensure the appearance quality of the products.Any gate will leave traces on the surface of the product, thus it will affect the surface quality. In order to not affect the appearance of the product, design should try to set the gate in the invisible parts of the product. If it is impossible, the gate should be easily removed, and after the removal, the left traces should be the minimum. (2) Ensure the quality of the product.The style and quantity of the gate should be reasonable, which need ensure that the plastic melt quickly fill the cavity and the pressure and heat loss are reduced. The internal organization of products is fine. The design of the gate system should prevent the defects of the products, like the shrinkage mark, short filling, flash, poor weld line, residual stress, deformation, uneven shrinkage, jetting, drooling, resin degradation and other defects. The gate system should be able to smoothly guide the molten plastic to fill cavity in every corner, so that the gas can be discharged, avoiding the bubbles by trapped air. The feed system should collect the melt material of the low temperature, prevent its entering the cavity and affect the quality of the products. The gate and runner system are arranged balanced possibly. Melt plastic can be evenly filled in each cavity, so that the shrinkage rate of each cavity is uniform. The good feed system design could improve the size accuracy of the plastic parts, and ensure the injection part to be interchangeable. (3) The minimum flow resistance.Flow path of the melt plastic should be as short as possible, turning should be reduced and the cross-sectional area of the runner should be reasonably. the appropriate cross-sectional area should be small. The reason is; increasing the small to the big is simple, but the contrary is hard; The small runner reduces the proportion of waste material.; The circular melt can fill the cavity in the shortest time to shorten the molding cycle and improve the productivity of the mold; The less air in the feed system would reduce the venting burden of the plastic mold If The temperature and pressure loss of the melt in the flow channel are small, the molding quality of the product is easy to guarantee. (4)Not affect the automatic production.If the mold is designed for the automatic production, the feed system (runner and gate) should be able to fall off automatically. Contents and steps of the feed system design The design procedure and content are as follows. (1) The type of the gate system. According to the structure, shape and size of the product, they would decide its filling process, like the side gate system, the point gate system or the system without runner, and then determine the adoption of mold base. (2) The design of the gate.According to the structure, size and appearance of the product, determine the form, location, quantity and the size of the gate. (3) The dimensions and locations of the main runner (4) Design of branch runner.According to the structure, size and variety of the products, the shape and cross-section of the branch runner are determined. (5) Design of assistant runner.According to the follow-up process or the structure of the product, determine whether to design the assistant runner, and its Shape and size: (6) Design of cold material well.According to the length of the sub runner and the structure of the product, determine the location and size of the cold material well.

How to Extract Core & Cavity in Siemens NX Without Mold Wizard?

Shuvam Kumar
in Tooling
3 0 Intermediate
How to Extract Core & Cavity in Siemens NX Without Mold Wizard https://youtu.be/GqEPlGoA2Js
molding injection plastic wizard mold nx cavity core

Ejection System of an Injection Mold

Murali K
in Tooling
3 0 Beginner
Ejection is a process of removing the plastic material from the mold. This are of different types to remove the material from mold. EJECTION TECHNIQUES: • PIN EJECTOR: • Simplest and most economical method . • Location and number of ejector pins depends on component shape and size. D-SHAPED EJECTOR PIN : • Flat sided ejected pin. • Made by machining of flat on standard ejected pin. • BLADE EJECTOR : • Basically a rectangular ejector pin. • Slender parts such as ribs are ejected by this method. • SLEEVE EJECTOR: • Molding by means of hallow ejector pin or sleeve. • Ejections of small cylindrical Molding. • Provide positive ejector around a local core pin in forming and hole in the mold. • VALVE EJECTOR : • Large diameter ejector pin. • Used for ejections of large component. • Ejector applies ejector force on to the inside surface of the molding • AIR EJECTOR: • Ejector force is supplied by compressed air. • STRIPPER BAR EJECTOR: • Ejector element pushes against the bottom at the molding. • Effective area of ejection is greater. • Suitable for walled box type moldings. • STRIPPER PLATE EJECTOR: • Mold adopted for ejecting circular box moldings with thin wall sections.

Tips for Designing FDM Composite Tooling

GrabCAD Tutorials
in Tooling
2 1 Beginner
Regardless of the general FDM tool style you are using, designers should strive to minimize material use while optimizing print time and quality for the desired application. The following are general tips for cost-effective design of FDM. The following tips and tricks are brought to you by Stratasys.com:
printing 3d fdm composites

Camera mold design

Fadi Alahmar
in Tooling
2 0 Beginner
injection mold design with solid works

#NX MOLD WIZARD #Plastic Cup mold design

Umesh Arora
in Tooling
2 0 Beginner
#NX MOLD WIZARD #Plastic Cup mold design
siemens cavity core solutions cam cad design cup wizard mold nx
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.