Tutorials

How to Change the Commands Language

13 0 Beginner
How to change the Software SolidWorks Language. Como mudar o idioma do SolidWorks.

2. Solving 2D Problems

12 0 Beginner
In this tutorial we will discuss about the 2D problems which involve defining boundary condition and solving them. Iam going to create the nozzle with the air velocity inlet (ideal) and pressure outlet. Improving mesh obtain good result.

Car Design fluid flow anlysis |ANSYS|

10 0 Beginner
Model car air flow anlysis in Ansys.

Saving your Fusion 360 design in your local storage

10 0 Intermediate
Hi @https://grabcad.com/cyrhuz.sortijas.bocar-1, You've mentioned earlier that your license is about to expire. The good news is it will prompt you options of renewing your educational license. I figured that you asked about these because you're worried that your precious thesis file that you put in so much effort will be lost. Luckily all design files from f360 is saved in the cloud (internet connection required). So there's pretty much nothing to worry about. Anyhow, here's a quick tutorial on how to save your f360 design file on your local storage as a safety precaution.

Flow in diffuser (Fluid-Flow CFX) ANSYS

9 1 Intermediate
in this video i am going to tell you how to make "Flow in diffuser (Fluid-Flow CFX) ANSYS". you can check it out in YouTube by clicking here :- https://youtu.be/a5nawFGT8Fs Also you can visit my detailed blog on this topic :- https://www.mechprof.com/2020/06/flow-in-diffuser-fluid-flow-cfx-ansys.html

[VIDEO] Several Ansys Fluent and CFX CFD tutorials

9 1 Intermediate
How to achieve 2D and 3D CFD simulations with commerical CFD software ? This tutorial shows how to simulate different task with fluent and cfx If you like this, please sucribe my Youtube channel !

diverse shape translation to JT or STP

8 2 Intermediate
Have found a way to import / translate easy shape files like 3ds, wrl, skp, stl, ifc and so on into JT or STP. The shape files can have texture or not. My interest was how to get the shape files with texture translated to JT. For this, I use PCon Planner and save as 3DS. After this, import it into MeshLab (single texture file / no layer) and save it as WRL (VRML 2). This is than easy to import into Teamcenter Livecyle Visualisation (TCVis) and save as JT. If you like to have more imported WRL/JT files into TCvis (JT2Go) please rename the texture or the view results in TCVis (JT2Go) are bad, looks like unplaced textures. If you like to export files with not a texture another way is to use. The fast one with no colours is to save as stl and import it into your volume modeller. The longer way is here to import it into PCon after this save as Skp (Sketchup) and now is to use Automapki (~40 $ or € / year sorry no freeware I have found) and save as STP file. The result you can now import into a volume modeller and use it there or (and) save it as JT and many other files too. Hope you like this tutorial a bit. If you have any questions please let me know.

COMPUTATIONAL ANALYSIS OF PARALLEL FLOW OF HOT AND COLD FLUID THROUGH A PIPE

8 0 Intermediate
COMPUTATIONAL ANALYSIS OF PARALLEL FLOW OF HOT AND COLD FLUID THROUGH A PIPE

How to Download and Draw People in Solidworks

8 0 Beginner
SEE THE VIDEO BELOW

CFD Analysis (Solidworks 2018)

7 0 Intermediate
This video shows the trajectory, behavior and motion of the particles of air stream around a concept model car at speed of 100 m/s. Observe the vortex generation, flow around high pressure areas and flow around the back of the car. The simulation is done on Solidworks 2018 Flow simulation. The car model can be downloaded from this link- https://grabcad.com/library/concept-c...

Rectangular Plate with a Uniform Pressure Load

7 3 Expert
In this vedio we will see a uniformpressure load in a rectangle plate 1. Create geometry 2. Apply constraints 3. Apply pressure load 4. Define required results 5. Solve 6. Examine Results 7. Generate Report

Water Sloshing

6 1 Intermediate
Water sloshing from ansys cfd fluent

(VIDEO) Exportar archivo SketchUp a SolidWorks (Español) - Método completo avanzado

5 0 Beginner
Exportar archivo SketchUp a SolidWorks (Español) - Método completo avanzado ================================== NO HAGA CLIC AQUÍ: http://bit.ly/projetos_infinity ================================== Haga clic en el enlace a continuación para obtener información sobre cómo le daré el curso de SolidWorks certificado por WhatsApp: https://youtu.be/qjSQivb0VWU descargue mis proyectos grabcad incluyendo este video man https://enrt.eu/download_grabcad_projects extensión de sketchup STL https://enrt.eu/extension_stl_sketchup

Fluid Flow in A TURBINE (Fluid-Flow-CFX) ANSYS

5 1 Intermediate
in this video i am going to tell you how to make "Fluid Flow in A TURBINE (Fluid-Flow-CFX) ANSYS". you can check it out in YouTube by clicking here :- https://youtu.be/8rAj3Ld87Q4 Also you can visit my detailed blog on this topic :- https://www.mechprof.com/2020/06/fluid-flow-in-turbine-fluid-flow-cfx.html

Solidworks flow simulation | Flow of air over hot sphere

5 0 Intermediate
Flow of cold air over hot sphere using solidworks.