Tutorials

  • Design & CAD ×
  • Translations ×
  • Kinematics ×
  • AutoCAD ×
  • Fusion 360 ×
  • SolidFace ×
  • tutorial ×

Rubik's Cube

Piyush Kushwaha
in Modeling
0 0 Expert
Rubiks cube in fusion 360
Fusion 360 tutorial beginners modelling stroke power 360 fusion cube rubiks

AutoCAD - Complete Tutorial for Beginners - Exercises 50

MRCAD
in Drafting
0 0 Expert
Telegram link - https://t.me/joinchat/jbCTJ5gDeCo3NWE1 Blog: https://www.cadcamtutorial.in/ FUNCTION KEY:- Ø ESC : To cancel Command Ø F1 : Autocad Help Ø F2 : Text Window on/off To see recently used command, options, Points. Ø F3 : Osnap button on/off. Ø F4 : Tablet on/off (Autocad 2010 & Prior Versions) 3DOSNAP ON/OFF (Autocad 2011 & Autocad 2012) Ø F5 : To change isoplane in isometric drawing. Ø F6 : DUCS (Dynamic user co-ordinate system) button on/off. Ø F7 : Grid button on/off. By default grid spacing is 0.5 inch in X- direction and Y - direction. Ø F8 : Ortho button on/off. Ø F9 : Snap button on/off If snap button is on mode from status bar than cursor will be Jump on the graphic one dot to another dot. Ø F10 : Polar button on/off. (Alternate off ortho button) Ø F11 : Otrack button on/off. (object snap tracking) Ø F12 :
AutoCAD command help key function cadcamtutorial beginners tutorial complete autocad

AutoCAD - Complete Tutorial for Beginners - Exercises 49

MRCAD
in Drafting
1 0 Expert
Telegram link - https://t.me/joinchat/jbCTJ5gDeCo3NWE1 Blog: https://www.cadcamtutorial.in/ FUNCTION KEY:- Ø ESC : To cancel Command Ø F1 : Autocad Help Ø F2 : Text Window on/off To see recently used command, options, Points. Ø F3 : Osnap button on/off. Ø F4 : Tablet on/off (Autocad 2010 & Prior Versions) 3DOSNAP ON/OFF (Autocad 2011 & Autocad 2012) Ø F5 : To change isoplane in isometric drawing. Ø F6 : DUCS (Dynamic user co-ordinate system) button on/off. Ø F7 : Grid button on/off. By default grid spacing is 0.5 inch in X- direction and Y - direction. Ø F8 : Ortho button on/off. Ø F9 : Snap button on/off If snap button is on mode from status bar than cursor will be Jump on the graphic one dot to another dot. Ø F10 : Polar button on/off. (Alternate off ortho button) Ø F11 : Otrack button on/off. (object snap tracking) Ø F12 :
AutoCAD 49 exercises complete beginners 2d tutorials beginner tutorial 2021 solidworksassembly completetutorialforbeginners autocadtutorialforbeginners autocad2dpracticeexercises autocadexercises autocad2dpractice 2dautocaddrawing autocadtutorial autocad

AutoCAD - Complete Tutorial for Beginners - Exercises 48

MRCAD
in Drafting
1 0 Expert
Telegram link - https://t.me/joinchat/jbCTJ5gDeCo3NWE1 Blog: https://www.cadcamtutorial.in/ FUNCTION KEY:- Ø ESC : To cancel Command Ø F1 : Autocad Help Ø F2 : Text Window on/off To see recently used command, options, Points. Ø F3 : Osnap button on/off. Ø F4 : Tablet on/off (Autocad 2010 & Prior Versions) 3DOSNAP ON/OFF (Autocad 2011 & Autocad 2012) Ø F5 : To change isoplane in isometric drawing. Ø F6 : DUCS (Dynamic user co-ordinate system) button on/off. Ø F7 : Grid button on/off. By default grid spacing is 0.5 inch in X- direction and Y - direction. Ø F8 : Ortho button on/off. Ø F9 : Snap button on/off If snap button is on mode from status bar than cursor will be Jump on the graphic one dot to another dot. Ø F10 : Polar button on/off. (Alternate off ortho button) Ø F11 : Otrack button on/off. (object snap tracking) Ø F12 : DY
AutoCAD cadcamtutorial key function drafting 48 exercises beginners tutorial complete autocad

AutoCAD - Complete Tutorial for Beginners - Exercises 47

MRCAD
in Drafting
0 0 Expert
Telegram link - https://t.me/joinchat/jbCTJ5gDeCo3NWE1 Blog: https://www.cadcamtutorial.in/ FUNCTION KEY:- Ø ESC : To cancel Command Ø F1 : Autocad Help Ø F2 : Text Window on/off To see recently used command, options, Points. Ø F3 : Osnap button on/off. Ø F4 : Tablet on/off (Autocad 2010 & Prior Versions) 3DOSNAP ON/OFF (Autocad 2011 & Autocad 2012) Ø F5 : To change isoplane in isometric drawing. Ø F6 : DUCS (Dynamic user co-ordinate system) button on/off. Ø F7 : Grid button on/off. By default grid spacing is 0.5 inch in X- direction and Y - direction. Ø F8 : Ortho button on/off. Ø F9 : Snap button on/off If snap button is on mode from status bar than cursor will be Jump on the graphic one dot to another dot. Ø F10 : Polar button on/off. (Alternate off ortho button) Ø F11 : Otrack button on/off. (object snap tracking) Ø F12 : DY
AutoCAD use how design autodesk tutorials 2d beginner tutorial 2021 autocad

AutoCAD - Complete Tutorial for Beginners - Exercises 43

MRCAD
in Drafting
0 0 Expert
Telegram link - https://t.me/joinchat/jbCTJ5gDeCo3NWE1 Blog: https://www.cadcamtutorial.in/ We will learn the below features or commands in Solidworks. AllSketchTool SketchCondition UnderDefined FullyDefined OverDefined SketchExpert ExtrudeBoss ExtrudeCut RevolveBoss RevolveCut SweepBoss SweepCut PlaneCreation LoftedBoss LoftedCut HoleWizard Fillet chamfer TypesofPatterns #SolidWorksBeginnersTutorials​ #SolidWorksSketching​ #SolidWorksSurface​ #SolidWorksWeldments​ #SolidWorksAssembly​ #SolidWorksDrawing​ #SolidWorksSheetMetal​ #SolidWorksMoldDesign​ #SolidWorksSimulation​ #SolidWorksMotion Please Subscribe to our channel for more videos & projects in Solidworks & don't forget to hit like & share the videos, thanks for watching. Laptop Information Dell G3 3579 Core i5 8th Gen 15.6-inch FHD Item model number - G3 3579 Processor Type - Core i5 Processor Speed 2.3 GHz RAM Size - 16 GB Graphics Coprocessor - NVIDIA GeForce GTX 1050 https://www.cadcamtutorial
AutoCAD cam cad aakash bhagat cadcamtutorial beginners tutorial complete autocad

AutoCAD - Complete Tutorial for Beginners - Exercises 41

MRCAD
in Drafting
0 0 Expert
Telegram link - https://t.me/joinchat/jbCTJ5gDeCo3NWE1 Blog: https://www.cadcamtutorial.in/ We will learn the below features or commands in Solidworks. AllSketchTool SketchCondition UnderDefined FullyDefined OverDefined SketchExpert ExtrudeBoss ExtrudeCut RevolveBoss RevolveCut SweepBoss SweepCut PlaneCreation LoftedBoss LoftedCut HoleWizard Fillet chamfer TypesofPatterns #SolidWorksBeginnersTutorials​ #SolidWorksSketching​ #SolidWorksSurface​ #SolidWorksWeldments​ #SolidWorksAssembly​ #SolidWorksDrawing​ #SolidWorksSheetMetal​ #SolidWorksMoldDesign​ #SolidWorksSimulation​ #SolidWorksMotion Please Subscribe to our channel for more videos & projects in Solidworks & don't forget to hit like & share the videos, thanks for watching. Laptop Information Dell G3 3579 Core i5 8th Gen 15.6-inch FHD Item model number - G3 3579 Processor Type - Core i5 Processor Speed 2.3 GHz RAM Size - 16 GB Graphics Coprocessor - NVIDIA GeForce GTX 1050 https://www.cadcamtutorial
AutoCAD beginners tutorial complete exercises 2d autocadexercises autocad cad cadcamtutorial

AutoCAD - Complete Tutorial for Beginners - Exercises 40

MRCAD
in Drafting
4 0 Expert
Telegram link - https://t.me/joinchat/jbCTJ5gDeCo3NWE1 Blog: https://www.cadcamtutorial.in/ We will learn the below features or commands in Solidworks. AllSketchTool SketchCondition UnderDefined FullyDefined OverDefined SketchExpert ExtrudeBoss ExtrudeCut RevolveBoss RevolveCut SweepBoss SweepCut PlaneCreation LoftedBoss LoftedCut HoleWizard Fillet chamfer TypesofPatterns #SolidWorksBeginnersTutorials​ #SolidWorksSketching​ #SolidWorksSurface​ #SolidWorksWeldments​ #SolidWorksAssembly​ #SolidWorksDrawing​ #SolidWorksSheetMetal​ #SolidWorksMoldDesign​ #SolidWorksSimulation​ #SolidWorksMotion Please Subscribe to our channel for more videos & projects in Solidworks & don't forget to hit like & share the videos, thanks for watching. Laptop Information Dell G3 3579 Core i5 8th Gen 15.6-inch FHD Item model number - G3 3579 Processor Type - Core i5 Processor Speed 2.3 GHz RAM Size - 16 GB Graphics Coprocessor - NVIDIA GeForce GTX 1050 https://www.cadcamtutorial
AutoCAD cadcamtutorial 40 exercises beginners tutorial complete autocad

AutoCAD - Complete Tutorial for Beginners - Exercises 39

MRCAD
in Modeling
0 0 Expert
Search 1.2 K timer 1y 14 60m 926 48h insert_chart refresh VidIQ logo 2 Avatar image #SolidWorksBeginnersTutorials​ #SolidWorksSketching​ #SolidWorksSurface​ AutoCAD - Complete Tutorial for Beginners - Exercises 39 5 viewsJul 10, 2021 0 0 SHARE SAVE CAD CAM TUTORIAL Telegram link - https://t.me/joinchat/jbCTJ5gDeCo3NWE1 Blog: https://www.cadcamtutorial.in/ AutoCAD - Complete Tutorial for Beginners - Exercises 39 We will learn the below features or commands in Solidworks. AllSketchTool SketchCondition UnderDefined FullyDefined OverDefined SketchExpert ExtrudeBoss ExtrudeCut RevolveBoss RevolveCut SweepBoss SweepCut PlaneCreation LoftedBoss LoftedCut HoleWizard Fillet chamfer TypesofPatterns #SolidWorksBeginnersTutorials​ #SolidWorksSketching​ #SolidWorksSurface​ #SolidWorksWeldments​ #SolidWorksAssembly​ #SolidWorksDrawing​ #SolidWorksSheetMetal​ #SolidWorksMoldDesign​ #SolidWorksSimulation​ #SolidWorksMotion Please Subscribe to our channel for mor
AutoCAD beginners tutorial complete autocad

AutoCAD - Complete Tutorial for Beginners - Exercises 9

MRCAD
in Drafting
1 0 Expert
COMPLET COUESH FOR 100 EXERCISEC FUNCTION KEY:- Ø ESC : To cancel Command Ø F1 : Autocad Help Ø F2 : Text Window on/off To see recently used command, options, Points. Ø F3 : Osnap button on/off. Ø F4 : Tablet on/off (Autocad 2010 & Prior Versions) 3DOSNAP ON/OFF (Autocad 2011 & Autocad 2012) Ø F5 : To change isoplane in isometric drawing. Ø F6 : DUCS (Dynamic user co-ordinate system) button on/off. Ø F7 : Grid button on/off. By default grid spacing is 0.5 inch in X- direction and Y direction. Ø F8 : Ortho button on/off. Ø F9 : Snap button on/off If snap button is on mode from status bar than cursor will be Jump on the graphic one dot to another dot. Ø F10 : Polar button on/off. (Alternate off ortho button) Ø F11 : Otrack button on/off. (object snap tracking) Ø F12 : DYN button on/off. (Dynamic input) Short cut keys:- Ø Ctrl+A : select all Ø Ctrl+B : Snap on/off Ø Ctrl+C : Copy objects to clipboard Ø Ctrl+D : Dynamic UCS (DUCS) on/off Ø Ctrl+E : To change isoplane in isometric Ø Ctrl+F : Osnap on/off Ø Ctrl+G : Grid on/off Ø Ctrl+H : Set variable Ø Ctrl+I : Co-ordinate on/off Ø Ctrl+J : Repeat Last Command Ø Ctrl+K : Hyperlink Command Ø Ctrl+L : Ortho on/off Ø Ctrl+M : Repeat Last Command Ø Ctrl+N : To create new autocad file Ø Ctrl+O : To open autocad file Ø Ctrl+P : To print/plot autocad file Ø Ctrl+Q : To Quit/Exit from autocad Ø Ctrl+R : To cycle between viewports Ø Ctrl+S : To save autocad file Ø Ctrl+T : Tablet on/off Ø Ctrl+U : Polar on/off Ø Ctrl+V : Paste objects from clipboard Ø Ctrl+W : Otrack on/off (Autocad 2010 & prior ver.) Ø Ctrl+W : Selection cycling on/off (New Autocad 2011) Ø Ctrl+X : Cut objects to clipboard Ø Ctrl+Y : Redo Ø Ctrl+Z : Undo Ø Ctrl+0 : Clean Screen Ø Ctrl+1 : Properties Ø Ctrl+2 : Autocad design center Ø Ctrl+3 : Tool Palettes Ø Ctrl+4 : Sheet set Manager Ø Ctrl+5 : Info palette ( not working from Acad2008) Ø Ctrl+6 : Database Connect Ø Ctrl+7 : Markup set manager Ø Ctrl+8 : Quick calculator Ø Ctrl+9 : Show /Hide Commandline Window Ø Ctrl+Shift+C : Copy objects With basepoint Ø Ctrl+Shift+E : Presspull Command Ø Ctrl+Shift+H : Show /Hide Commandline window Ø Ctrl+shift+P : Quick properties Ø Ctrl+Shift+S : Save as Autocad file Ø Ctrl+Shift+V : Paste as block #Complete​ Tutorial for Beginners #AutoCAD​ - SolidWorks Beginners Tutorials - SolidWorks Sketching - SolidWorks Surface - SolidWorks Weldments - SolidWorks Assembly - SolidWorks Drawing - SolidWorks Sheet Metal - SolidWorks Mold Design - SolidWorks Simulation - SolidWorks Motion please subscribe our channel for more videos & projects in solidworks & dont forget to hit like & share the videos, thanks for watching.
AutoCAD beginners tutorial complete autocad

AutoCAD - Complete Tutorial for Beginners - Exercises 5

MRCAD
in Drafting
0 0 Expert
COMPLET COUESH FOR 100 EXERCISEC FUNCTION KEY:- Ø ESC : To cancel Command Ø F1 : Autocad Help Ø F2 : Text Window on/off To see recently used command, options, Points. Ø F3 : Osnap button on/off. Ø F4 : Tablet on/off (Autocad 2010 & Prior Versions) 3DOSNAP ON/OFF (Autocad 2011 & Autocad 2012) Ø F5 : To change isoplane in isometric drawing. Ø F6 : DUCS (Dynamic user co-ordinate system) button on/off. Ø F7 : Grid button on/off. By default grid spacing is 0.5 inch in X- direction and Y direction. Ø F8 : Ortho button on/off. Ø F9 : Snap button on/off If snap button is on mode from status bar than cursor will be Jump on the graphic one dot to another dot. Ø F10 : Polar button on/off. (Alternate off ortho button) Ø F11 : Otrack button on/off. (object snap tracking) Ø F12 : DYN button on/off. (Dynamic input) Short cut keys:- Ø Ctrl+A : select all Ø Ctrl+B : Snap on/off Ø Ctrl+C : Copy objects to clipboard Ø Ctrl+D : Dynamic UCS (DUCS) on/off Ø Ctrl+E : To change isoplane in isometric Ø Ctrl+F : Osnap on/off Ø Ctrl+G : Grid on/off Ø Ctrl+H : Set variable Ø Ctrl+I : Co-ordinate on/off Ø Ctrl+J : Repeat Last Command Ø Ctrl+K : Hyperlink Command Ø Ctrl+L : Ortho on/off Ø Ctrl+M : Repeat Last Command Ø Ctrl+N : To create new autocad file Ø Ctrl+O : To open autocad file Ø Ctrl+P : To print/plot autocad file Ø Ctrl+Q : To Quit/Exit from autocad Ø Ctrl+R : To cycle between viewports Ø Ctrl+S : To save autocad file Ø Ctrl+T : Tablet on/off Ø Ctrl+U : Polar on/off Ø Ctrl+V : Paste objects from clipboard Ø Ctrl+W : Otrack on/off (Autocad 2010 & prior ver.) Ø Ctrl+W : Selection cycling on/off (New Autocad 2011) Ø Ctrl+X : Cut objects to clipboard Ø Ctrl+Y : Redo Ø Ctrl+Z : Undo Ø Ctrl+0 : Clean Screen Ø Ctrl+1 : Properties Ø Ctrl+2 : Autocad design center Ø Ctrl+3 : Tool Palettes Ø Ctrl+4 : Sheet set Manager Ø Ctrl+5 : Info palette ( not working from Acad2008) Ø Ctrl+6 : Database Connect Ø Ctrl+7 : Markup set manager Ø Ctrl+8 : Quick calculator Ø Ctrl+9 : Show /Hide Commandline Window Ø Ctrl+Shift+C : Copy objects With basepoint Ø Ctrl+Shift+E : Presspull Command Ø Ctrl+Shift+H : Show /Hide Commandline window Ø Ctrl+shift+P : Quick properties Ø Ctrl+Shift+S : Save as Autocad file Ø Ctrl+Shift+V : Paste as block #Complete​ Tutorial for Beginners #AutoCAD​ - SolidWorks Beginners Tutorials - SolidWorks Sketching - SolidWorks Surface - SolidWorks Weldments - SolidWorks Assembly - SolidWorks Drawing - SolidWorks Sheet Metal - SolidWorks Mold Design - SolidWorks Simulation - SolidWorks Motion please subscribe our channel for more videos & projects in solidworks & dont forget to hit like & share the videos, thanks for watching.
AutoCAD beginners tutorial complete autocad

How to design a HELMET in AUTODESK Fusion 360 | Bangla | Learn Fusion 360 easily

Md. Shahriar Mohtasim
in Modeling
0 0 Expert
In this very learning session, we will see a fusion 360 tutorial in Bangla to make a HELMET. This tutorial focuses on the fusion 360 step-by-step tutorial and one of the best fusion 360 tutorial for the absolute beginner. Besides, fusion 360 practice projects are the main focus here. This tutorial is for Autodesk fusion 360 for beginners in part modeling, You can convert it into a .stl file for 3d printing. Social media links: Facebook: https://www.facebook.com/shahriar.sifat.566 LinkedIn: https://www.linkedin.com/in/md-shahriar-mohtasim/ Twitter: https://twitter.com/sifatME_164 ------------------------------------------------ Keyboard Shortcuts: 'D' : Dimension 'A': Appearance 'Q': Press/pull 'esc' : Exit ------------------------------------------------- Tutorial Links: UEFA Champions League Trophy: https://www.youtube.com/watch?v=jsqRbBI6_j8 Wheel Rim Design: https://www.youtube.com/watch?v=orjIhexfCN0 Shock Absorber part_1: https://www.youtube.com/watch?v=UaDoeqOSk5A Shock Absorber part_2: https://www.youtube.com/watch?v=FfzznZwy_bI&t=3s Seat Clamp design part_1: https://www.youtube.com/watch?v=NVRHdo73CAc Seat Clamp design part_2: https://www.youtube.com/watch?v=HQ52tfDEYn8 Design V-12 Engine Piston: https://www.youtube.com/watch?v=zGY9dwjm4m8 Mini motor Assembly: https://www.youtube.com/watch?v=AWsTbHmXqoE Tire design : https://www.youtube.com/watch?v=MsTY2ifgXNY&t=26s Main parts assembly of an engine: https://www.youtube.com/watch?v=GsHoHwmYZ1M&t=3s Hexagonal Nut: https://www.youtube.com/watch?v=XmA3cnH2FcI&t=1s Design a Helical Gear: https://www.youtube.com/watch?v=QuULsvoxsdo&t=5s Design a normal Gear: https://www.youtube.com/watch?v=Lqc2610Uv88&t=4s fusion 360 step-by-step tutorial fusion 360 tutorial youtube fusion 360 modeling tutorial fusion 360 step-by-step tutorial one of the best fusion 360 tutorials fusion 360 tutorial fusion 360 practice projects Autodesk fusion 360 for beginners #learn #CAD #HOW #How_to #Autodesk #fusion_360 #RUET #Bangla
Fusion 360 autodesk 360 fusion tutorial bangla how helmet

AutoCAD - Complete Tutorial for Beginners - Exercises 26

MRCAD
in Drafting
0 0 Expert
FUNCTION KEY:- Ø ESC : To cancel Command Ø F1 : Autocad Help Ø F2 : Text Window on/off To see recently used command, options, Points. Ø F3 : Osnap button on/off. Ø F4 : Tablet on/off (Autocad 2010 & Prior Versions) 3DOSNAP ON/OFF (Autocad 2011 & Autocad 2012) Ø F5 : To change isoplane in isometric drawing. Ø F6 : DUCS (Dynamic user co-ordinate system) button on/off. Ø F7 : Grid button on/off. By default grid spacing is 0.5 inch in X- direction and Y direction. Ø F8 : Ortho button on/off. Ø F9 : Snap button on/off If snap button is on mode from status bar than cursor will be Jump on the graphic one dot to another dot. Ø F10 : Polar button on/off. (Alternate off ortho button) Ø F11 : Otrack button on/off. (object snap tracking) Ø F12 : DYN button on/off. (Dynamic input) Short cut keys:- Ø Ctrl+A : select all Ø Ctrl+B : Snap on/off Ø Ctrl+C : Copy objects to clipboard Ø Ctrl+D : Dynamic UCS (DUCS) on/off Ø Ctrl+E : To change isoplane in isometric Ø Ctrl+F : Osnap on/off Ø Ctrl+G : Grid on/off Ø Ctrl+H : Set variable Ø Ctrl+I : Co-ordinate on/off Ø Ctrl+J : Repeat Last Command Ø Ctrl+K : Hyperlink Command Ø Ctrl+L : Ortho on/off Ø Ctrl+M : Repeat Last Command Ø Ctrl+N : To create new autocad file Ø Ctrl+O : To open autocad file Ø Ctrl+P : To print/plot autocad file Ø Ctrl+Q : To Quit/Exit from autocad Ø Ctrl+R : To cycle between viewports Ø Ctrl+S : To save autocad file Ø Ctrl+T : Tablet on/off Ø Ctrl+U : Polar on/off Ø Ctrl+V : Paste objects from clipboard Ø Ctrl+W : Otrack on/off (Autocad 2010 & prior ver.) Ø Ctrl+W : Selection cycling on/off (New Autocad 2011) Ø Ctrl+X : Cut objects to clipboard Ø Ctrl+Y : Redo Ø Ctrl+Z : Undo Ø Ctrl+0 : Clean Screen Ø Ctrl+1 : Properties Ø Ctrl+2 : Autocad design center Ø Ctrl+3 : Tool Palettes Ø Ctrl+4 : Sheet set Manager Ø Ctrl+5 : Info palette ( not working from Acad2008) Ø Ctrl+6 : Database Connect Ø Ctrl+7 : Markup set manager Ø Ctrl+8 : Quick calculator Ø Ctrl+9 : Show /Hide Commandline Window Ø Ctrl+Shift+C : Copy objects With basepoint Ø Ctrl+Shift+E : Presspull Command Ø Ctrl+Shift+H : Show /Hide Commandline window Ø Ctrl+shift+P : Quick properties Ø Ctrl+Shift+S : Save as Autocad file Ø Ctrl+Shift+V : Paste as block #Complete Tutorial for Beginners #AutoCAD - SolidWorks Beginners Tutorials - SolidWorks Sketching - SolidWorks Surface - SolidWorks Weldments - SolidWorks Assembly - SolidWorks Drawing - SolidWorks Sheet Metal - SolidWorks Mold Design - SolidWorks Simulation - SolidWorks Motion please subscribe our channel for more videos & projects in solidworks & dont forget to hit like & share the videos, thanks for watching. CADCREATIVE.IN Laptop Information Dell G3 3579 Core i5 8th Gen 15.6-inch FHD Item model number - G3 3579 Processor Type - Core i5 Processor Speed 2.3 GHz RAM Size - 16 GB Graphics Coprocessor - NVIDIA GeForce GTX 1050
AutoCAD drawing combine beginner animation project work solid design tutorial solidworks

AutoCAD - Complete Tutorial for Beginners - Exercises 20

MRCAD
in Drafting
0 0 Expert
COMPLET COUESH FOR 100 EXERCISEC FUNCTION KEY:- Ø ESC : To cancel Command Ø F1 : Autocad Help Ø F2 : Text Window on/off To see recently used command, options, Points. Ø F3 : Osnap button on/off. Ø F4 : Tablet on/off (Autocad 2010 & Prior Versions) 3DOSNAP ON/OFF (Autocad 2011 & Autocad 2012) Ø F5 : To change isoplane in isometric drawing. Ø F6 : DUCS (Dynamic user co-ordinate system) button on/off. Ø F7 : Grid button on/off. By default grid spacing is 0.5 inch in X- direction and Y direction. Ø F8 : Ortho button on/off. Ø F9 : Snap button on/off If snap button is on mode from status bar than cursor will be Jump on the graphic one dot to another dot. Ø F10 : Polar button on/off. (Alternate off ortho button) Ø F11 : Otrack button on/off. (object snap tracking) Ø F12 : DYN button on/off. (Dynamic input) Short cut keys:- Ø Ctrl+A : select all Ø Ctrl+B : Snap on/off Ø Ctrl+C : Copy objects to clipboard Ø Ctrl+D : Dynamic UCS (DUCS) on/off Ø Ctrl+E : To change isoplane in isometric Ø Ctrl+F : Osnap on/off Ø Ctrl+G : Grid on/off Ø Ctrl+H : Set variable Ø Ctrl+I : Co-ordinate on/off Ø Ctrl+J : Repeat Last Command Ø Ctrl+K : Hyperlink Command Ø Ctrl+L : Ortho on/off Ø Ctrl+M : Repeat Last Command Ø Ctrl+N : To create new autocad file Ø Ctrl+O : To open autocad file Ø Ctrl+P : To print/plot autocad file Ø Ctrl+Q : To Quit/Exit from autocad Ø Ctrl+R : To cycle between viewports Ø Ctrl+S : To save autocad file Ø Ctrl+T : Tablet on/off Ø Ctrl+U : Polar on/off Ø Ctrl+V : Paste objects from clipboard Ø Ctrl+W : Otrack on/off (Autocad 2010 & prior ver.) Ø Ctrl+W : Selection cycling on/off (New Autocad 2011) Ø Ctrl+X : Cut objects to clipboard Ø Ctrl+Y : Redo Ø Ctrl+Z : Undo Ø Ctrl+0 : Clean Screen Ø Ctrl+1 : Properties Ø Ctrl+2 : Autocad design center Ø Ctrl+3 : Tool Palettes Ø Ctrl+4 : Sheet set Manager Ø Ctrl+5 : Info palette ( not working from Acad2008) Ø Ctrl+6 : Database Connect Ø Ctrl+7 : Markup set manager Ø Ctrl+8 : Quick calculator Ø Ctrl+9 : Show /Hide Commandline Window Ø Ctrl+Shift+C : Copy objects With basepoint Ø Ctrl+Shift+E : Presspull Command Ø Ctrl+Shift+H : Show /Hide Commandline window Ø Ctrl+shift+P : Quick properties Ø Ctrl+Shift+S : Save as Autocad file Ø Ctrl+Shift+V : Paste as block #Complete Tutorial for Beginners #AutoCAD - SolidWorks Beginners Tutorials - SolidWorks Sketching - SolidWorks Surface - SolidWorks Weldments - SolidWorks Assembly - SolidWorks Drawing - SolidWorks Sheet Metal - SolidWorks Mold Design - SolidWorks Simulation - SolidWorks Motion please subscribe our channel for more videos & projects in solidworks & dont forget to hit like & share the videos, thanks for watching. CADCREATIVE.IN
AutoCAD exercisec 100 couesh complet 20 exercises beginners tutorial complete autocad cadcreative-in

AutoCAD - Complete Tutorial for Beginners - Exercises 19

MRCAD
in Drafting
1 0 Expert
COMPLET COUESH FOR 100 EXERCISEC FUNCTION KEY:- Ø ESC : To cancel Command Ø F1 : Autocad Help Ø F2 : Text Window on/off To see recently used command, options, Points. Ø F3 : Osnap button on/off. Ø F4 : Tablet on/off (Autocad 2010 & Prior Versions) 3DOSNAP ON/OFF (Autocad 2011 & Autocad 2012) Ø F5 : To change isoplane in isometric drawing. Ø F6 : DUCS (Dynamic user co-ordinate system) button on/off. Ø F7 : Grid button on/off. By default grid spacing is 0.5 inch in X- direction and Y direction. Ø F8 : Ortho button on/off. Ø F9 : Snap button on/off If snap button is on mode from status bar than cursor will be Jump on the graphic one dot to another dot. Ø F10 : Polar button on/off. (Alternate off ortho button) Ø F11 : Otrack button on/off. (object snap tracking) Ø F12 : DYN button on/off. (Dynamic input) Short cut keys:- Ø Ctrl+A : select all Ø Ctrl+B : Snap on/off Ø Ctrl+C : Copy objects to clipboard Ø Ctrl+D : Dynamic UCS (DUCS) on/off Ø Ctrl+E : To change isoplane in isometric Ø Ctrl+F : Osnap on/off Ø Ctrl+G : Grid on/off Ø Ctrl+H : Set variable Ø Ctrl+I : Co-ordinate on/off Ø Ctrl+J : Repeat Last Command Ø Ctrl+K : Hyperlink Command Ø Ctrl+L : Ortho on/off Ø Ctrl+M : Repeat Last Command Ø Ctrl+N : To create new autocad file Ø Ctrl+O : To open autocad file Ø Ctrl+P : To print/plot autocad file Ø Ctrl+Q : To Quit/Exit from autocad Ø Ctrl+R : To cycle between viewports Ø Ctrl+S : To save autocad file Ø Ctrl+T : Tablet on/off Ø Ctrl+U : Polar on/off Ø Ctrl+V : Paste objects from clipboard Ø Ctrl+W : Otrack on/off (Autocad 2010 & prior ver.) Ø Ctrl+W : Selection cycling on/off (New Autocad 2011) Ø Ctrl+X : Cut objects to clipboard Ø Ctrl+Y : Redo Ø Ctrl+Z : Undo Ø Ctrl+0 : Clean Screen Ø Ctrl+1 : Properties Ø Ctrl+2 : Autocad design center Ø Ctrl+3 : Tool Palettes Ø Ctrl+4 : Sheet set Manager Ø Ctrl+5 : Info palette ( not working from Acad2008) Ø Ctrl+6 : Database Connect Ø Ctrl+7 : Markup set manager Ø Ctrl+8 : Quick calculator Ø Ctrl+9 : Show /Hide Commandline Window Ø Ctrl+Shift+C : Copy objects With basepoint Ø Ctrl+Shift+E : Presspull Command Ø Ctrl+Shift+H : Show /Hide Commandline window Ø Ctrl+shift+P : Quick properties Ø Ctrl+Shift+S : Save as Autocad file Ø Ctrl+Shift+V : Paste as block #Complete Tutorial for Beginners #AutoCAD - SolidWorks Beginners Tutorials - SolidWorks Sketching - SolidWorks Surface - SolidWorks Weldments - SolidWorks Assembly - SolidWorks Drawing - SolidWorks Sheet Metal - SolidWorks Mold Design - SolidWorks Simulation - SolidWorks Motion please subscribe our channel for more videos & projects in solidworks & dont forget to hit like & share the videos, thanks for watching.
AutoCAD exercisec 100 couesh complet 19 exercises autocad beginners tutorial complete
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.