Tutorials

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.

Exercise 7 || 90 Degree PVC Equal Tee

0 0 Beginner
Designing 90 Degree PVC Equal Tee using solidwork. A pipe tee is used for distributing or collecting the fluid from the run pipe. It is a short piece of pipe with a 90-degree branch at the center. Two types of Tee are used in piping: Equal / Straight Tee and Reducing / Unequal Tee.

Tutorial title: SolidFace Professional Training Tutorials #02

0 0 Beginner
Welcome to the SolidFace Professional Training! Moving on at our lessons in 2D CAD, we'll get more profound on the commands: Rectangle, Relative Point, Circle, Multiple Lines, Osnap, Centerline, Dimensions, Dimensions Edition. Bem-Vindos ao Treinamento da SolidFace Profissional! Dando continuidade as nossas lições no CAD 2D, os features serão: Rectangle, Relative Point, Circle, Multiple Lines, Osnap, Centerline, Dimensions, Dimensions Edition.

SolidFace Professional Training Tutorials #01

0 0 Beginner
Welcome to the SolidFace Professional Training! This video is an introduction to the SolidFace interface when we'll see some essential functions on the CAD 2D. We'll see the features Line, Multiple Lines, Linear Dimensions, Centerline, and the differences between Parametric and Non-Parametric Dimensions. Bem-Vindos ao Treinamento da SolidFace Profissional! Esse vídeo é uma introdução da interface do SolidFace, onde nós vamos ver algumas funções básicas na parte de CAD 2D, vamos ver os features Line, Multiple Lines, Linear Dimensions, Centerline, e as diferenças entre cotas paramétricas e não paramétricas.

Convert STEP/IGES files to STL on Mac

3 1 Intermediate
We’ve added a translator on Workbench that allows users to download a CAD file in STEP, IGES and STL formats, regardless of the format it was uploaded in. This makes it easy to share models with partners who don’t use the same CAD system you do. With just one click your supplier can download any of the neutral formats based on the original file you uploaded.