Tutorials

Cap screws and machine screws

64 12 Intermediate
Cap screws and machine screws are similar in shape, differing only in their relative sizes. Machine screws are usually smaller in size, compared to cap screws. These are used for fastening two parts, one with clearance hole and the other with tapped hole. The clearance of the unthreaded hole need not be shown on the drawing as its presence is obvious. Figure 5.24 shows different types of cap and machine screws, with proportions marked Cap screws are produced in finish form and are used on machines where accuracy and appearance are important. As cap screws are inferior to studs, they are used only on machines requiring few adjustments and are not suitable where frequent removal is necessary. These are produced in different diameters, upto a maximum of 100 mm and lengths 250 mm. Machine screws are produced with a naturally bright finish and are not heat treated. They are particularly adopted for screwing into thin materials and the smaller ones are threaded throughout the length. They are used in fire-arms, jigs, fixture and dies. They are produced in different diameters upto a maximum of 20 mm and lengths upto 50 mm.

Project Manager

12 0 Expert
Hello, I have been working professionally on technical drawing and design since 1993 I have worked on a wide variety of projects. I am a freelancer Nice to talk and learn with everyone. f.sogukkuyu@gmail.com

#11 Creo Sketch Tutorial- Inspect Tools In Creo

3 0 Intermediate
Friends! Don't forget, if you like our videos please "Subscribe", "Like", "Favorite" and "Share" it to your friends to show your support.

[EPS 04] Cara membuat Etiket Gambar Teknik | Autodesk Inventor

3 0 Beginner
Cara membuat Etiket Gambar Teknik dengan Autodeks Inventor

How to Create Full Unfold Cross Section

2 0 Beginner
In this video, you can see the logic or explanation - How Xsec Full(Aligned) and Full(Unfold) works - you need to select Axis for this type of section or not.

How to display different assembly positions on a drawing

2 0 Beginner
Do you have a mechanism and you need to show 2 and more positions on the drawing?

CAD I CAM I CAE I BIM Tutorial

2 1 Beginner
Welcome to SS e Academy.com Now Tutorial Creo Parametric 5.0 You have more learn CAD I CAM I CAE I BIM Software Tutorial In www.SSeAcademy.com

Create blue print by Autodesk Inventor

2 1 Intermediate
In this tutorial, study how to create a blue print by Autodesk inventor.

How to create cross sections

1 0 Beginner
In this tutorial, you can learn How to create cross sections - full and local

Sketchup to Inventor-How to export SketchUp to Inventor-convert Google sketchup to Autodesk Inventor

1 1 Beginner
see the video below

Having the problem when show annotation model used in the drawing

1 0 Beginner
"Having the problem when show annotation model used in the drawing"

Convertir Archivo de Sketchup a Inventor exportación e importe Español

1 0 Beginner
mira el video a continuación

How to create BOM table from the scratch

1 0 Beginner
A few simple steps and you ill know all about Repeat region in Creo - you will know How to manage BOM and BOM positions

Using Sketch in Inventor Assembly Parts.

1 0 Beginner
1. Create a sketch from the assembly parts. 2. Build new parts by referring to sketches.

Creo Tutorial: How to Change style of selected lines

1 0 Beginner
This video has been created based on a question from a comment under my video on YouTube channel. Feel free to contact me or leave a comment, or idea for another Creo tutorial.