Tutorials

Saving your Fusion 360 design in your local storage

11 0 Intermediate
Hi @https://grabcad.com/cyrhuz.sortijas.bocar-1, You've mentioned earlier that your license is about to expire. The good news is it will prompt you options of renewing your educational license. I figured that you asked about these because you're worried that your precious thesis file that you put in so much effort will be lost. Luckily all design files from f360 is saved in the cloud (internet connection required). So there's pretty much nothing to worry about. Anyhow, here's a quick tutorial on how to save your f360 design file on your local storage as a safety precaution.

How to import 3D meshes with appearance properties in Fusion 360

1 0 Beginner
Case study regarding various models imported with visual appearances in Fusion 360

Creo Parametric. Адаптивная пружина сжатия (Часть 1). Flexible Compression Spring.

0 0 Intermediate
Это видео, а также вторую часть, заключительную, смотрите на моем канале YouTube^ https://www.youtube.com/channel/UC9fDxJ-FN2hPADXeyca7dyg Адаптивная пружина позволяет использовать ее в качестве гибкого компонента в сборке, что дает возможность добавлять компонент в сборку много раз с разными размерами в зависимости от места установки. Создание адаптивной пружины на растяжение можно посмотреть на этом же канале: https://www.youtube.com/watch?v=6MqKQuqpMF8&t=1s An adaptive spring allows it to be used as a flexible component in an assembly, which makes it possible to add a component to an assembly many times with different sizes depending on the installation location. Программа использованная в уроке: Creo Parametric опора=(угол_опоры/360)*диа_проволоки межосевое_расстояние=высота+2*опора-диа_проволоки Перемещение=межосевое_расстояние/(кол_витков-1)-диа_проволоки расстояние_р3_р4= межосевое_расстояние -2*диа_проволоки-2*Перемещение A=кол_витков-2 /*количество активных витков B=A*диа_проволоки-4*Перемещение-расстояние_р3_р4 C= -расстояние_р3_р4*диа_проволоки PICH=(-B+sqrt(B^2-4*A*C))/(2*A) расстояние_1=диа_проволоки расстояние_2=диа_проволоки+Перемещение расстояние_3=межосевое_расстояние-диа_проволоки-Перемещение расстояние_4=межосевое_расстояние-диа_проволоки pp_1=диа_проволоки pp_2=диа_проволоки pp_3=PICH pp_4=PICH pp_5=диа_проволоки pp_6=диа_проволоки Видео является переработанной и адаптированной для пользователей моего канала версией цикла "Creo Flexible Compression Spring" англоязычного автора канала: https://www.youtube.com/channel/UCmx0...

How to do thermal ands static simulation on cantilever and Simply Supported Beam

0 0 Beginner
Hello everyone, in this simple short video, i've shown a process of using static and thermal stress simulation using Autodesk Fusion 360 . and there are somethings in the model which i overlooked as this tutorial is meant for beginners, so i've tried to keep it very simple. so follow the video till last.

Fusion 360 - Import 3D scans with textures

0 0 Intermediate
Importing 3D scans with textures into Fusion 360 is not a straightforward process. Depending on the file format there are additional steps that need to be done regarding the texture. Usually the best solution is to retexture the model within Blender.