Tutorials

NX 11:Creating Assembly

14 2 Beginner
A tutorial on Sub assembly and showing arrangements of hydraulic cylinder-piston assembly.

Clamp Design

14 1 Beginner
Clamp Design https://www.instagram.com/p/CqAkr5bKxDZ/

DRONE DESIGN in SIEMENS NX

13 0 Beginner
An unmanned aerial vehicle (UAV) (or uncrewed aerial vehicle,[2] commonly known as a drone) is an aircraft without a human pilot on board. UAVs are a component of an unmanned aircraft system (UAS); which include a UAV, a ground-based controller, and a system of communications between the two.[3] The flight of UAVs may operate with various degrees of autonomy: either under remote control by a human operator or autonomously by onboard computers[4] referred to as an autopilot.

Basic Modelling 1 (NX Unigraphics)

13 0 Beginner
Basic modelling techniques using NX Unigraphics.

MACHINE DESIGN

10 0 Beginner
MACHINE DESIGN

Roller bracket in NX

9 2 Beginner
Modeling and assembly

Car design in NX

9 1 Beginner
Car design in nx

Siemens NX Mechatronics Concept Designer

9 0 Beginner
nx mechatronics concept designer simulation

EARTH MOVERS VEHICLE DESIGN | EXCAVATOR DESIGN

8 0 Beginner
EARTH MOVERS VEHICLE DESIGN

DRONE ASSEMBLY DESIGN in SIEMENS NX

8 0 Beginner
Drone assembly design using Siemens NX, An unmanned aerial vehicle (UAV) (or uncrewed aerial vehicle,[2] commonly known as a drone) is an aircraft without a human pilot on board. UAVs are a component of an unmanned aircraft system (UAS); which include a UAV, a ground-based controller, and a system of communications between the two.[3] The flight of UAVs may operate with various degrees of autonomy: either under remote control by a human operator or autonomously by onboard computers[4] referred to as an autopilot.

Drone Design in NX

7 2 Beginner
An unmanned aerial vehicle (UAV) (or uncrewed aerial vehicle,[2] [3]commonly known as a drone) is an aircraft without a human pilot on board and a type of unmanned vehicle. UAVs are a component of an unmanned aircraft system (UAS); which include a UAV, a ground-based controller, and a system of communications between the two. The flight of UAVs may operate with various degrees of autonomy: either under remote control by a human operator, autonomously by onboard computers [4] or piloted by an autonomous robot.[5]

Does NX 7.5/8 has any toolbox (e.g to gears and pinion) like in solidworks?

7 0 Beginner
go to start in windows

PC FAN & MOLD: SolidWorks / KeyCreator

8 4 Beginner
See video: https://youtu.be/QBIEqWPU-o4

PLASTIC BOX: SolidWorks / KeyCreator

6 1 Beginner
See video: https://www.youtube.com/watch?v=wO9Oajq64UM&ab_channel=ManuelValenzuela

How to extrude a text in NX

6 2 Beginner
In this tutorial you will be able to extrude a text and make the text solid.