Tutorials

  • AutoCAD ×
  • Autodesk Inventor ×
  • Rhino ×
  • Other ×

LEGO - 01 Basic Dimensions & Bricks Explained

dk
in Modeling
68 9 Intermediate
I get a lot of questions about how I create LEGO parts. This is Part I - The Basics. Most "standard" parts can be created using only simple math. Standard parts consist of square, circular, and angled blocks - regular geometric blocks. I will refer to BrickLink (www.bricklink.com/), but many others use similar methods: Peeron: http://www.peeron.com/ BrickOwl: http://www.brickowl.com/ Brickipedia: http://lego.wikia.com/wiki/LEGO_Wiki etc.
Autodesk Inventor bricks dimensions lego

How to change the drawing plane on autocad 3d?

Riolito Paildelan - GCPH
in Design & CAD
5 0 Intermediate
Hi https://grabcad.com/nataraj.ruban-1, Please see some images that I provided for reference. :) Please don't forget to hit "UPVOTE" below my comments if what I have provided helped you with your problem. Let me know if anything. Thanks & Good luck.
AutoCAD plane drawing autocad

Drawing with coordinates in AutoCAD

Karajko CAD
in Drafting
1 0 Intermediate
In this tutorial I am going to show you how to create drawings by using coordinates.
AutoCAD coordinates autocad

how to convert jpg to prt or step?

Antz Bee
in Design & CAD
9 2 Intermediate
Hi, Today, converting technology from JPG/PNG to Vector is so easy. And if you want convert JPG to .prt or step file you need convert it to the vector first. These is the steps :
AutoCAD

How do i add thickness to a polyline in Rhinoceros 3D

Patel Deepak
in Design & CAD
3 2 Intermediate
hi https://grabcad.com/mark.goody-2, following picture can guide you to add thickness to any curves by adding few simple steps while modelling.
Rhino bending rhino wire

How to export autocad drawing in pdf i real scale?

bakini
in Design & CAD
10 1 Intermediate
i hope it answer your question
AutoCAD autocad pdf

How to convert a SLDPRT file to STEP

Amine Mech
in Design & CAD
1 3 Intermediate
this is your file open with autocad 2012 Tutorial : open file solidworks with autocad
AutoCAD

New approach in designing and modelling an Oil pump using Inventor 2016

Ebrahim Abu Has
in Design & CAD
107 13 Intermediate
Step by step tutorial videos, showing the easy way of modelling an Oil pump using Inventor 2016, how to create the parts, assemble them and drive gears, new approach make use of most Inventor specs, design center with some new tips & tricks ...
Autodesk Inventor ticks tips some splines parallel shafts keyways keys shaft design gears spur

How to 3D Print from Adobe Photoshop

Stratasys
in Modeling
16 0 Intermediate
Every sculpture, product, installation and building (successful and unsuccessful) starts with an idea. When it takes physical form, the designer gets valuable aesthetic and practical feedback. Here are some tips on when and how 3D printing can feed this process.
Other polyjet cad stratasys graphics designing 3dprinting photoshop

How to create NPT (national pipe taper) threads using inventor

engineer
in Modeling
13 3 Intermediate
I have had people ask me on here how I model npt threads for some of the parts I make, so I figured I would put it out there for others to see as well. Note: if you look at the threaded models I have on this website you will see that I have clearly taken more time on some of them than others, this tutorial will teach you how to do it the right and proper way.
Autodesk Inventor threads npt

how to make 2d for gear in autocad?

Jaiprakash Pandey
in Design & CAD
1 0 Intermediate
Here you will find clear step by step procedure to make simple gear with autocad https://www.youtube.com/watch?v=sKBrj4Zcy8E
AutoCAD nx autocad catia mastercam

How to create Rack & Pinion using Inventor 2016

Ebrahim Abu Has
in Modeling
12 0 Intermediate
How to create Rack & Pinion with Inventor 2016 and show the motion??? Step by Step tutorial .... follow the link below https://www.youtube.com/playlist?list=PLCrNndUdp-R2RXvptMFVptVGuLDD0NV2f
Autodesk Inventor constrains drive assembly modelling 3d 2016 inventor pinion rack

Basic Tutorial for AutoCAD

DHANASEKAR VINAYAGAMOORTHY
in Modeling
28 3 Intermediate
This Tutorial will give you idea about basic introduction about AutoCAD, user guide tutorial for tools, best practices, applications. This tutorial is the web series for basic AutoCAD so follow up for the next file. Hit like if it is useful.
AutoCAD modelling drafting design 2d basics tutorial autocad

How to measure in Rhino?

Patel Deepak
in Design & CAD
2 2 Intermediate
Dimensions always measure as though the object were projected to the current construction plane. 1. use linear dimension for measuring length and width measurements. 2. use aligned dimension for diagonal measurements.
Rhino

Dynamic Block in Autocad

Bhagyesh Balkrishna Kasle
in Modeling
7 0 Intermediate
This tutorial demonstrate "How to create dynamic block for scaling of a circle"
AutoCAD action scale dynamic block autocad
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.