Tutorials

How to change the drawing plane on autocad 3d?

4 0 Intermediate
Hi https://grabcad.com/nataraj.ruban-1, Please see some images that I provided for reference. :) Please don't forget to hit "UPVOTE" below my comments if what I have provided helped you with your problem. Let me know if anything. Thanks & Good luck.

how to convert jpg to prt or step?

7 2 Intermediate
Hi, Today, converting technology from JPG/PNG to Vector is so easy. And if you want convert JPG to .prt or step file you need convert it to the vector first. These is the steps :

How to export autocad drawing in pdf i real scale?

10 1 Intermediate
i hope it answer your question

How to convert a SLDPRT file to STEP

1 3 Intermediate
this is your file open with autocad 2012 Tutorial : open file solidworks with autocad

Basic Tutorial for AutoCAD

25 3 Intermediate
This Tutorial will give you idea about basic introduction about AutoCAD, user guide tutorial for tools, best practices, applications. This tutorial is the web series for basic AutoCAD so follow up for the next file. Hit like if it is useful.

Dynamic Block in Autocad

7 0 Intermediate
This tutorial demonstrate "How to create dynamic block for scaling of a circle"

Convert DWG to STEP or IPT format

3 0 Intermediate
Tutorial......

How to 3D Print from Adobe Photoshop

16 0 Intermediate
Every sculpture, product, installation and building (successful and unsuccessful) starts with an idea. When it takes physical form, the designer gets valuable aesthetic and practical feedback. Here are some tips on when and how 3D printing can feed this process.

How to convert a CAD file to an STL file?

2 0 Intermediate
STL is the standard file type used by most or all rapid prototyping systems. A STL is a triangulated representation of a 3D CAD model (figure 1). The triangulation of a surface will cause faceting of the 3D model. The parameters used for outputting a STL will affect how much faceting occurs (figure 2 and 3). You cannot build the model any better or smoother than the STL file, so if the STL is coarse and faceted, that is what you can expect in the final model. In the CAD package, when exporting to STL, you may see parameters for chord height, deviation, angle tolerance, or something similar. These are the parameters that affect the faceting of the STL.You don’t necessarily want to go too small. The finer the STL the larger the file is in size, which will affect processing time in Insight as well as build time. Below is some information found on the Internet regarding exporting to STL from various CAD packages.

tutorial 6 ( ansys workbench ) / ( cutting tools simulation

14 6 Intermediate
just be aware of that the question input as if ( speed , time , dimension ) is not real it mean you can't use it as academic project . i just wanted to show you the processing of cutting tools simulation therefore with alter input data you can use it as real project . for real input data you can use https://grabcad.com/library/cutting-tools-simulation-1

"how to do structural and thermal analysis of disc brake rotor using ansys software

22 2 Intermediate
following step u can do

HOW TO USE BOTH FLOW SIMULATION AND THERMAL ANALISIS IN A HEAT EXCHANGER

21 1 Intermediate
Heat exchanger

Design of Press tools

6 0 Intermediate
Cutting Clearance between Punch and die in Press tool

AutoCAD | 3D Part and 3D Dimensioning

9 0 Intermediate
How to give dimensions on 3D part in AutoCAD.

How to convert a .step file into a solid object in autocad

4 0 Intermediate
Step to Solid object using Autocad