Tutorials

  • NX Unigraphics ×
  • SpaceClaim ×

BEAST ENGINE DESIGN

MANIKANTHA P
in Modeling
0 0 Intermediate
BEAST ENGINE DESIGN : https://youtu.be/pnn2QnXhNCk
NX Unigraphics siemens ug nx engine engine design

S-shaped battery cooling geometry in ANSYS

Amit Kumar Yadav
in Modeling
0 0 Intermediate
Creating an S-shaped cooling geometry in ANSYS or any other simulation software requires a good understanding of fluid dynamics, heat transfer, and simulation tools. It may also involve several iterations to achieve the desired battery system cooling performance.
SpaceClaim automation simulation performance cooling system battery heat transfer fluid dynamics

What is MOLD Technology?

Educationwood
in Assemblies
1 0 Intermediate
Mold, also spelled Mould, in manufacturing, a cavity or matrix in which a fluid or plastic substance or Other Material is shaped into a desired finished product. like mold for : Plastic Aluminum Rubber Metal like MS for Complete course contact on: +91-8871511975 visit : www.educationwood.com
NX Unigraphics plastic mold lecture mold classes mold lecture mold design lecture mold design course plastic mold technology mould design mold design

Universal Joint Design In Nx

Anup Chauhan
in Drafting
4 0 Intermediate
universal joints parts and assembly https://www.instagram.com/p/CpsYpDtqoQ5/ files: https://grabcad.com/library/universal-joint-426 original design: Na CAD 2007
NX Unigraphics nx cad automotive automobile

Auto Ballooning NX2007 (2022)

Jay Raj
in Drafting
1 0 Intermediate
Hello Everybody, Welcome to Mech Dezignz. Today we will se how to add part list and add ballooning to the views in assembly. So lets begin... So this is in assembly format. So that we can do ballooning and drafting partwise... First of all we will go to drafting... So after putting the view we will go to part list... To set the length of the table we have to go to part list properties... So by increasing the height the contents can be adjusted in single table... Now for ballooning, we can add the auto balloon to any view which have been imported... So by right clicking and choosing show balloon we can do auto ballooning... We can adjust the balloons as required by stretching or double clicking to add or modify contents... Since this is latest NX some commands may be different than older version... Any queries can be carried on to the comments section... Thanks Have a nice day...
NX Unigraphics reverse engineering cad nx 2d 3d drafting nx2022 nx2007

HƯỚNG DẪN MÔ PHỎNG HỘP GIẢM TỐC

GIANG NGUYEN
in Modeling
2 0 Intermediate
HƯỚNG DẪN MÔ PHỎNG HỘP GIẢM TỐC
NX Unigraphics

ROBOTIC ARM COMPLETE DESIGN

MANIKANTHA P
in Modeling
6 0 Intermediate
ROBOTIC ARM COMPLETE DESIGN
NX Unigraphics assembly assemblies robot robotic arm robotics

M6 Socket Head Bolt Design in NX 1926 | Thread Tool Tutorial | Design in NX #NX

Paul Dadzie
in Modeling
0 0 Intermediate
For all my engineering fellas out there, especially students, this video will teach you how to use Siemens Unigraphics NX for an M6 socket head bolt design in just 5mins. This video will also show you how to easily use the new thread feature or tool in Siemens NX 1926 This video will introduce you to some of the easy and basic concept of CAD design in NX. Learning Isometric design in CAD is an easy and quick way of becoming familiar and mastering any CAD software Lessons in this Video: - NX Sketch tutorial - Using Thread tool or command -Using Chamfering on Bolts -Polygon Sketches in NX -Assigning Feature Color or Editing Display --------------------------------------------------------------------------------------------------------------------------
NX Unigraphics m6 bolt tutorial nx beginner tutorial nx basic cad tutorial nx tutorial nx unigraphics siemens nx tutorial

Infinity Cube Design NX 1926 | Mirror Tool Tutorial | Design in NX #NX

Paul Dadzie
in Modeling
0 0 Intermediate
Watch and Learn how to use Siemens NX 3D software in just a few minutes. In this video, I show you how to use Siemens NX 1926 version to create the popular infinity cube design. This video also shows how to use the Mirror tool in the 3D interface. This video will introduce you to some of the easy and basic concept of CAD design in NX. Learning Isometric design in CAD is an easy and quick way of becoming familiar and mastering any CAD software Lessons in this Video: - NX Sketch tutorial - Using Mirror command -Using Body Unite -------------------------------------------------------------------------------------------------------------------------- Video Timestamps: 00:00 - INTRO & What we will be designing 00:30 - Beginning of Tutorial - First NX Sketch 00:45 - Fit, Pan and Offset in NX Sketch 02:07 - First Extrusion 04:40 - Creating Datums and Using Mirror command 06:50 - More Extrusions 09:48 - Using Body Unite Feature in NX 10:08 - Editing model display / assigning colors to model 10:59 - OUTRO AND BONU
NX Unigraphics infinity box design isometric lesson in nx nx isometric tutorial nx beginner tutorial nx basic cad tutorial nx tutorial nx unigraphics siemens nx tutorial

Metal Chains Design in Siemens NX 1926 | Swept & Pattern Tool Tutorial | Design in NX #NX

Paul Dadzie
in Modeling
0 0 Intermediate
In this video, I will be using the Linear and Path Pattern along a curve or Sketch Command to design this metal chain in Siemens NX 1926 in less than 10mins. This video will also show you how to use the swept command under the Surface tab in NX. This video will introduce you to some of the easy and basic concept of an Isometric design in NX 1926. Learning Isometric design in CAD is an easy and quick way of becoming familiar and mastering any CAD software Lessons in this Video: - Fillet in Sketch - Rapid Dimensioning in Sketch - Swept Tool/Command - Using Tangent Geometric Constraint - Along a Curve/Sketch Patterning -Linear Pattern -Making a chain design - Using feature Color -------------------------------------------------------------------------------------------------------------------------- Video Timestamps: 00:00 - INTRO 00:22 - What We Will Be Designing 00:29 - Beginning of Tutorial - First NX Sketch 01:05 - Using Fillet in NX 02:35 - Rapid Dimension use in Sketch 04:02 - Using Swept Command in
NX Unigraphics chains tutorial isometric lesson in nx nx isometric tutorial nx beginner tutorial nx basic cad tutorial nx tutorial nx unigraphics siemens nx tutorial

Use Ansys SpaceClaim to Model Twisted Pair Wire

Fineman
in Modeling
1 0 Intermediate
Before I know how to do it, I cannot get any useful tips while I googling, it seems very hard. But it is very easy now. This tutorial will help you to model a simple twisted pair wire, for detailed twisted pair wire you can explore it by yourself. A model which modeled by this tutorial is in this linked page: https://grabcad.com/library/w-1930-1575-twisted-pair-wire-1.
SpaceClaim wire pair twisted spaceclaim

Tube co-ordinates in 3D NX

Jay Raj
in Modeling
0 0 Intermediate
Good evening Everybody... Today We will see how to find intersection points in 3D model... This could be useful in reverse engineering and model correction... Ok then lets start the video... First we will make points and lines from the model as showing now... So we have made centre lines as in model... Now we will make instersecting points for the model... So the points have been created... The co-ordinates of these points are used in bending program as well... So lets see how to find co-ordinates of these points... This is how the co-ordinates of intersection points are taken in 3D model... Thanks...
NX Unigraphics point set inspection point measure intersection points bending points reverse engineering 3d nx

Thiết kế khuôn phần 3 - Tách Cavity và Core

Alexander Lam
in Modeling
0 0 Intermediate
Thiết kế khuôn phần 3 - Tách Cavity và Core Tiếp tục sau bước tạo slide là tạo Cavity và Core
NX Unigraphics molding injection unigraphics nx

NX_MOTION_2 CYLINDER VERTICAL COMPOUND CONDENSING NON REVERSING STEAM ENGINE

GIANG NGUYEN
in Modeling
3 0 Intermediate
NX_MOTION_2 CYLINDER VERTICAL COMPOUND CONDENSING NON REVERSING STEAM ENGINE
NX Unigraphics
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.