Tutorials

How to insert a picture in SOLIDWORKS?

20 3 Beginner
How to insert a picture in SOLIDWORKS?

How to Create GIF file After Rendering?? ( Solidworks + Keyshot + Photoscape)

39 10 Beginner
So many Engineers asking me to How to create GIF file which is Shown in Your profile picture.. So Here is the Answer...

SolidWorks Complete Learning Course Step by Step | Part 1

43 6 Beginner
This is a Complete Course of SolidWorks in which you will learn SolidWorks from Basics to Advanced Level. Very Easy SolidWorks Video Tutorial Series for you to learn solidworks step by step.

Split body in SolidWorks

6 0 Beginner
Split body feature and how it works.

Solid works Flow simulation

14 4 Intermediate
Hello I have made this tutorial for people who want to start learning Flow simulation in solidworks. You can find all tips in picture and if you find picture vague, do not hesitate to contact me. Best wishes, ARMIN

SolidWorks Flexible Sub-assembly (2 ways)

10 4 Intermediate
Most of us find it boring to keep repeating the same mates between the same parts within large assemblies, so we make "Sub-assembly" files to work with. But unfortunately, the default configuration for ALL sub-assemblies makes them "rigid"; as if they were a single part. Here we'll know how to make them "flexible", and in the easiest way possible.

TUTORIAL: Routing - Pipes and Tubes in Solidworks

10 0 Intermediate
TUTORIAL: Routing - Pipes and Tubes in Solidworks

Tutorial - Rendering Part models in SolidWorks?

3 1 Beginner
Here is the tutorial.

How to convert a CAD file to an STL file?

2 0 Intermediate
STL is the standard file type used by most or all rapid prototyping systems. A STL is a triangulated representation of a 3D CAD model (figure 1). The triangulation of a surface will cause faceting of the 3D model. The parameters used for outputting a STL will affect how much faceting occurs (figure 2 and 3). You cannot build the model any better or smoother than the STL file, so if the STL is coarse and faceted, that is what you can expect in the final model. In the CAD package, when exporting to STL, you may see parameters for chord height, deviation, angle tolerance, or something similar. These are the parameters that affect the faceting of the STL.You don’t necessarily want to go too small. The finer the STL the larger the file is in size, which will affect processing time in Insight as well as build time. Below is some information found on the Internet regarding exporting to STL from various CAD packages.

How to animate and model rope and pulley in solidworks ?

5 0 Intermediate
This video illustrate the steps

How to import Solidworks file to msc Adams

5 1 Beginner
Msc Adams software is very useful for dynamic simulations. This tutorial helps to import Solidworks 3D model file to Msc Adams software in proper way.

How to create a car surfaces based on BMW X6?

61 1 Beginner
you will see some of the advanced method for creating surfaces of a car BMW X6

Tutorial - Modeling Helmet in SolidWorks?

20 0 Beginner
Here is the tutorial.

How to REALLY export your color SOLIDWORKS files for printing

11 1 Beginner
An updated tutorial, showing you the BEST way to export your color SOLIDWORKS files for 3D printing, using the new '3MF' format!

How to "trim" bodies in an assembly in Solidworks?

4 0 Beginner
I don't think there is anything that easy in the assembly level but here are 2 different ways I would do it instead of opening every part and finding the sketch etc...