Tutorials

  • Alibre Design ×
  • Kompas-3D ×
  • PTC Creo Elements ×
  • tutorial ×

Параметризация модели через переменные в "Компас-3D"

Egor Chugay
in Modeling
13 0 Intermediate
Tutorial relevant for users "Kompas-3D". I don't know if they "Kompas-3D" is used in other countries, but I know "Kompas-3D" most popular in Russia, so further explanation will be in Russian. If you need English version, please comment tutorial, and I make translate. В данной заметке рассмотрено построение параметрической модели на примере корпуса микросхем типа QFP, модель строится в САПР «Компас-3D». Представленный ниже способ - лишь один из многих возможных. И я искренне надеюсь, что кому-то он поможет лучше разобраться 3D моделированием, а кто-то увидит, как оптимизировать процесс. Несмотря на то, что построение модели выполнялось в «Компас-3D», подобные механизмы могут присутствовать и в иных системах, так что возможно пригодится пользователям другого ПО. Описанный ниже способ предполагает наличие определенного навыка работы с 3D моделями, и не содержит подробного описания последовательностей нажатия клавиш, скорее описана методика построения и взаимосвязь объектов.
Kompas-3D qfp tutorial parametric kompas-3d

Tutorial on Modeling and Simulation of standard gear

Milan Ilić
in Design & CAD
6 1 Intermediate
Tutorial on Modeling and Simulation of standard gear...
PTC Creo Elements gear standard simulation tutorial engineer pro parametric creo

Tutorial - Making text emboss on the curved surface in Creo Elements/Pro aka Pro Engineer Wildfire?

Sudhir Gill
in Design & CAD
3 1 Beginner
Here is the tutorial.
PTC Creo Elements solid surface wildfire creo elements text engineer pro tutorial curved bend extrude emboss flatten quilt

Tutorial - Modeling Flower in Creo Element aka Pro/Engineer using Surfacing method 2?

Sudhir Gill
in Design & CAD
2 0 Beginner
Here is the tutorial.
PTC Creo Elements modeling surface wildfire flower engineer pro tutorial method

Tutorial - Modeling rope in Creo Elements aka Pro/E

c0cd00a1
in Design & CAD
2 0 Beginner
Steps for creating a rope in creo parametric 1.0
PTC Creo Elements modeling wildfire creo elements engineer pro tutorial

Tutorial - Modeling rope in Creo Elements aka Pro/E

Sudhir Gill
in Design & CAD
1 0 Beginner
For making simple bended rope we have to follow these steps. 1 Make 4 cylinderical extrusions. 2 Twist them. 3 Bend them.
PTC Creo Elements modeling wildfire creo elements engineer pro tutorial

Tutorial - Modeling Bolt with terminating thread in Creo Elements aka Pro/E?

Sudhir Gill
in Design & CAD
1 0 Beginner
Here is the tutorial.
PTC Creo Elements modeling bolt thread wildfire engineer pro tutorial terminating

Tutorial - Modeling Drill bit in Creo Elements Pro aka Pro/Engineer Wildfire?

Sudhir Gill
in Design & CAD
1 1 Beginner
Here is the tutorial.
PTC Creo Elements modeling bit drill wildfire creo elements engineer pro tutorial creating

Tutorial - Modeling Twisted cutter in Creo Elements aka Pro/E?

Sudhir Gill
in Design & CAD
1 0 Beginner
Here is the tutorial.
PTC Creo Elements tool modeling mill wildfire cutter engineer pro tutorial twisted

Tutorial - Creating Conic surfaces using shoulder curves in Creo Elements/Pro aka Pro Engineer Wildfire?

Sudhir Gill
in Design & CAD
1 0 Beginner
Here is the Tutorial.
PTC Creo Elements surface wildfire creo elements curve engineer pro tutorial using shoulder conic sided patch

Tutorial - Helical Sweep in Creo Elements/Pro aka Pro Engineer Wildfire?

Sudhir Gill
in Design & CAD
1 0 Beginner
Here is the tutorial.
PTC Creo Elements helical wildfire creo elements engineer sweep pro tutorial

Tutorial - Blend in Creo Elements/Pro?

Sudhir Gill
in Design & CAD
1 0 Beginner
Here is the tutorial
PTC Creo Elements creo elements pro tutorial blend

Tutorial - Spine feature in Creo Elements aka Pro/E?

Sudhir Gill
in Design & CAD
1 0 Beginner
Here is the tutorial.
PTC Creo Elements feature wildfire creo elements engineer pro tutorial spine

Tutorial - Analyzing the rod for von-mises stress using Mechanica in Creo Elements/Pro?

Sudhir Gill
in Design & CAD
1 0 Beginner
Here is the tutorial.
PTC Creo Elements rod wildfire creo elements engineer pro tutorial von mises stress distribution mechanica analyzing

Tutorial - Twist feature in Creo Elements aka Pro Engineer?

Sudhir Gill
in Design & CAD
1 0 Beginner
Here is the tutorial.
PTC Creo Elements feature twist wildfire creo elements engineer pro tutorial
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.