How to change the drawing plane on autocad 3d?

4 0 Intermediate
Hi https://grabcad.com/nataraj.ruban-1, Please see some images that I provided for reference. :) Please don't forget to hit "UPVOTE" below my comments if what I have provided helped you with your problem. Let me know if anything. Thanks & Good luck.

How to insert a symbol in AutoCAD?(ø,°,Ω)

4 0 Beginner
Learn how to insert symbols in AutoCAD. This GrabCAD tutorial teaches you how to add phase symbols, diametar symbols and even a dia symbol!

How to draw tangent arcs between two circles in AutoCAD?

22 4 Beginner
In this tutorial I am going to show you the easiest way to draw arc between two circles when you need specific radius.

how to convert jpg to prt or step?

7 2 Intermediate
Hi, Today, converting technology from JPG/PNG to Vector is so easy. And if you want convert JPG to .prt or step file you need convert it to the vector first. These is the steps :

How to export autocad drawing in pdf i real scale?

10 1 Intermediate
i hope it answer your question

How to convert a SLDPRT file to STEP

1 3 Intermediate
this is your file open with autocad 2012 Tutorial : open file solidworks with autocad

How do i add thickness to a polyline in Rhinoceros 3D

3 2 Intermediate
hi https://grabcad.com/mark.goody-2, following picture can guide you to add thickness to any curves by adding few simple steps while modelling.

Basic Tutorial for AutoCAD

25 3 Intermediate
This Tutorial will give you idea about basic introduction about AutoCAD, user guide tutorial for tools, best practices, applications. This tutorial is the web series for basic AutoCAD so follow up for the next file. Hit like if it is useful.

How to change lineweight in AutoCAD?

0 0 Beginner
A quick tip about changing lineweight in AutoCAD.

Dynamic Block in Autocad

7 0 Intermediate
This tutorial demonstrate "How to create dynamic block for scaling of a circle"

How to create a block in AutoCAD?

18 5 Beginner
In my first tutorial on GrabCAD I will show you how to create Blocks in AutoCAD. It is nothing complicated so lets start.

Convert DWG to STEP or IPT format

3 0 Intermediate

JOIN and EXPLODE commands in AutoCAD

0 0 Beginner
How to use JOIN and EXPLODE commands in AutoCAD?

AutoCAD practice drawing

2 2 Beginner
this video how to draw autocad mechanical drawings

How to convert a CAD file to an STL file?

2 0 Intermediate
STL is the standard file type used by most or all rapid prototyping systems. A STL is a triangulated representation of a 3D CAD model (figure 1). The triangulation of a surface will cause faceting of the 3D model. The parameters used for outputting a STL will affect how much faceting occurs (figure 2 and 3). You cannot build the model any better or smoother than the STL file, so if the STL is coarse and faceted, that is what you can expect in the final model. In the CAD package, when exporting to STL, you may see parameters for chord height, deviation, angle tolerance, or something similar. These are the parameters that affect the faceting of the STL.You don’t necessarily want to go too small. The finer the STL the larger the file is in size, which will affect processing time in Insight as well as build time. Below is some information found on the Internet regarding exporting to STL from various CAD packages.