Tutorials

Modeling quadcopter MKI (#1 propeller)

3 0 Intermediate
Learn how to model quadcopter propeller on shaper 3d app For more tutorials follow my YouTube account

Modeling quadcopter MKI(#2leg)

2 0 Intermediate
*Part 2*Learn how to model quadcopter propeller on shaper 3d app For more tutorials follow my YouTube account

How to make "Planer Blade" by using FreeCAD

1 0 Beginner
I made this tutorial as a practice in modelling a simple part using FreeCAD as shown in the thumbnail image. The version of FreeCAD I'm using is 0.20, other versions may be different. In this tutorial we work using the "Part Design Workbenche" and the tools used are: Pad tool, Pocket tool, and Hole tool. For more details, please watch the video.

Mechanical Movement

0 0 Beginner
https://youtu.be/80hbSGIL3xE

Create Region from Selective Primitives in Altium Designer

0 0 Intermediate
Altium Designer Tutorial 02: Create Region from Selective Primitives. In this Video i explained in detail how you can create Region from selective primitives from 3D Step file to 2D Layout. if you have any questions please write me at "altium366@gmail.com".

How to Import 3D PCB Step file in Altium Designer

0 0 Intermediate
Altium Designer Tutorial 01: How to Import 3D PCB Step file in Altium Designer In this video, I explained in detail how yo can import a 3D step model of PCB in Altium Designer for PCB Layout. if you have any questions please write me at "altium366@gmail.com".

How to do Object Snapping in Altium Designer

0 0 Intermediate
Altium Designer Tutorial 04: How to do Object Snapping in Altium Designer I tried to explain in the video how to do #Object snapping & #Type of Snapping in Altium Designer 21. if you have any questions please write me at "altium366@gmail.com".

Orient and Position 3D PCB Step in Altium Designer

0 0 Intermediate
Altium Designer Tutorial 05: Orient and Position 3D PCB Step in Altium Designer In this video, I explained in detail how to Orient and Position 3D Step model of PCB in Altium Designer. This command in 3D mode (Tools => 3DBody Placement => Orient and Position 3D Body ) is used to align a #3D Body with the #PCB (e.g. the mechanical housing/enclosure), or 2D footprint, when viewing the current board/footprint in 3D. It uses 6 points to perform its function; three points selected on the 3D model and then three corresponding points picked on the board/footprint. This technique does not necessarily require snap points to have been placed since any vertex on the 3D model can be used. if you have any questions please write me at "altium366@gmail.com".

Driving Gear 1 of One Engine Cylinder

0 0 Beginner
https://youtu.be/7Sw2lJXfn4Q Aria Panungku Gandanegara - 2106732866 - Vismod 3 - Kelompok 3