Tutorials

BEVEL GEAR USING FUSION360 - LOFT

31 0 Beginner
here you can how to create a bevel gear using simple steps in fusion 360

Fusion 360 Tutorial for Absolute Beginners: Introduction to Basic Sketch Modeling (2020) Part 1

9 0 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Introducing Autodesk 360! In this beginner lesson tutorial, we will learn the basics of creating 1D lines, which create 2D shapes and eventually 3D parts. We will explore the sketch tool, rectangle and extrusion tools, then the revolve tool to create 3D parts.

Tutorial - Inserting picture on sketch in Creo Element/Pro aka Pro Engineer Wildfire?

0 0 Beginner
Here is the tutorial

Model a Screw in Fusion 360! Tutorial for Absolute Beginners: Introduction to Sketch Modeling

5 0 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 In this tutorial we will be modeling a screw in Autodesk Fusion 360. We will learn to use the: 0:26 Sketch 3:48 Revolve 4:25 Cut Extrusion 5:04 Polygon Tool 7:12 Thread Tool 13:50 End Chamfer on Screw Threads

{​VIDEO}​ How to Route Electrical Cables & Twist Wires in Fusion 360

21 0 Beginner
How to Route Electrical Cables & Twist Wires in Fusion 360: [Please Thumbs Up!]

Tutorial - Modeling Drill bit in Creo Elements Pro aka Pro/Engineer Wildfire?

1 1 Beginner
Here is the tutorial.

Robotic Tank Tread Assembly- Fusion 360 Tutorial (Tracked Robot Part 2)

10 3 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Buy this chain: https://amzn.to/3f2FZEl In this series, we will design and develop a tracked, tank-like mobile robot optimized for use on sand and in desert environments. The modeling of the treads, custom sprocket, idler rollers and 3D printed suspension system will be shown in great detail. We will first create the chain links themselves and the tread pieces, then pattern them along the shape of the loop. Once we finish this, we will create the custom sprocket and motor connection followed by the idler spindle and finally the suspension system. In the end, we can mirror our entire assembly to the other side to create the right side tread. Working on only one side at a time makes it easier on our computers and allows us to work faster with less lag-time.

3D Printed Raspberry Pi Case Fusion 360 Tutorial

6 0 Beginner
#3DPrinted #3DPrinting #RaspberryPi

Tutorial - Intersect curve in Creo Elements/Pro aka Pro Engineer Wildfire?

0 0 Beginner
Here is the tutorial.

Tutorial - Modeling Flower in Creo Element aka Pro/Engineer using Surfacing method 2?

2 0 Beginner
Here is the tutorial.

Tutorial - Modeling Bolt with terminating thread in Creo Elements aka Pro/E?

1 0 Beginner
Here is the tutorial.

How to Use Threaded Inserts in Your 3D Printed Parts- Example with DC Motor in Fusion 360

3 2 Beginner
This tutorial illustrates the modeling and use of threaded bras inserts in 3d printed parts and set screws to clamp down on DC motor flats.

mesh using pipe comment in autodesk fusion360

3 0 Intermediate
here you can find how to make a steped mesh using pipe comment in fusion360

Robotic Suspension System 4- Fusion 360 Tutorial (Tracked Robot Part 9)

5 0 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Robotic Suspension System 4- Fusion 360 Tutorial (Tracked Robot Part 9)