Tutorials

How to design Complete Drone Overview

76 7 Intermediate
Complete Drone design with 1. raspberry pi 4 extension 2. pixhawk 3. landing gears 4. drone frame 5. telemetry module 6. gps module with stand 7. Battery 3300 mAh 8. antivibrator 9. Brushless Motor (BR4114) Please give it a like.

I Built a Military Robot

42 6 Intermediate
Mobile, military robot optimized for use in desert environments which can be controlled remotely or autonomously and can collect/ stream video to a VR headset via its front mounted camera. The method of movement is a continuous track, created using steel roller chain connected by fasteners with 3D printed links. These loops sit on a custom designed drive sprocket and idler sprocket with 4 shock absorber loaded roller pins that act as the suspension system. The drive motors are powered by '18650' batteries, directed by a raspberry pi 4 and connected to a motor controller. For connectivity, a mobile device can connect to the pi's external antenna as it is a WiFi access point. From here, directions can be sent to the robot from the mobile device using the Node Red GUI and additionally, the entirety of the main raspberry pi computer can be accessed for the use of sending custom commands for autonomous movement.

How to import the model to Fusion 360?

5 4 Intermediate
I have successfully imported the following files: .STEP / .stp / .ipt / .sat / .iam but neither of the two you mentioned. Upload the file from the Data Panel. After upload, it should show up as a thumbnail, right click on it & then 'open'. Parametric mode will be disabled but there's a workaround on youtube (https://youtu.be/H-N1LZufT_o). Good luck.

Difference in introducing fillet in 2D and 3D medium

3 3 Beginner
This tutorial highlights the difference in introducing fillets during a sketch (2D) and after an extrude command (3D).

Robotic Tank Tread Assembly- Fusion 360 Tutorial (Tracked Robot Part 2)

10 3 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Buy this chain: https://amzn.to/3f2FZEl In this series, we will design and develop a tracked, tank-like mobile robot optimized for use on sand and in desert environments. The modeling of the treads, custom sprocket, idler rollers and 3D printed suspension system will be shown in great detail. We will first create the chain links themselves and the tread pieces, then pattern them along the shape of the loop. Once we finish this, we will create the custom sprocket and motor connection followed by the idler spindle and finally the suspension system. In the end, we can mirror our entire assembly to the other side to create the right side tread. Working on only one side at a time makes it easier on our computers and allows us to work faster with less lag-time.

Cessna 182 Skylane Design-using Autodesk Fusion 360

8 3 Intermediate
In this video, I am going to make the Cessna 182 Skylane aircraft, I used a blueprint to trace it, I made it with solid. Not even one form!!!

Modelagem de funil (Português)

14 4 Beginner
Software: Fusion 360. Peça: Funil. Origem: SolidWorks Premiun 2009, pág. 197.

Gear "Module" Explained in 1 Minute

7 2 Beginner
#GearModule #Gears #Module https://amzn.to/3fjbhH3 Module=d/N (d is pitch diameter and N is number of teeth) Number of Teeth = Reference Diameter/ Module Reference Diameter = Module x Number of Teeth Reference Pitch = Module x Pi Like and subscribe for more!

Aircraft Propeller

6 2 Intermediate
This tutorial shows how to create design of Propeller using NACA Airfoil profile in the cross section of propeller. I use the airfoil to dat plugin in the Fusion 360, you can download in the link, and also NACA airfoil tools for the Airfoil profile

How to design a pulley system with wire rope in Fusion 360

3 2 Beginner
Short step by step tutorial on how to model a simple pulley system with wire ropes. It also has a simple step on how to perform a photorealistic render.

Quadcopter modelling| Autodesk Fusion360

5 2 Beginner
Quadcopter modelling| Autodesk Fusion360

How to do a Chain

4 2 Beginner
In this tutorials I will create a chain in Fusion 360. For the tutorials for swedish: http://jakobia.se/2016/09/21/chopper-tutorial-chain-part-1/

How to Use Threaded Inserts in Your 3D Printed Parts- Example with DC Motor in Fusion 360

3 2 Beginner
This tutorial illustrates the modeling and use of threaded bras inserts in 3d printed parts and set screws to clamp down on DC motor flats.

How To Model A Diamond Gem

1 2 Beginner
In this video, I demonstrate how to model a diamond gem piece. -------------------- Courtesy: CAD Pond

car modeling

0 1 Beginner
car modeling