Tutorials

How to FDM Print for Part Sliding Clearance

13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!

how to perform analysis test on ansys software

12 1 Intermediate
This is modal analysis of impeller step

Part 1: A Look at Color Proofing

10 0 Beginner
This tutorial gives some background on color proofing and explains what to do when the color you print doesn't match the color you chose on screen. There will be future tutorials that expand on the topics mentioned here.

Matte or Glossy? Which Finish to Use for Your 3D Prints and When.

9 0 Beginner
Matte or Glossy? That is the question. PolyJet users often ask themselves whether they should print a part with a matte finish or a glossy finish. And not without reason. The type of finish can totally alter the look, feel, color, and even strength and durability of two otherwise identical parts. Each option has its own benefits and implications that need to be considered. In this tutorial we will give an overview of matte and glossy, compare the pros and cons of each, and offer examples that clearly show what each finish type has to contribute. Finally, we will wrap up with a quick breakdown of when to use what.

Tutorial on Modeling and Simulation of standard gear

6 1 Intermediate
Tutorial on Modeling and Simulation of standard gear...

Creating a Worm Wheel in Creo Parametric 1.0

5 0 Beginner
Here's the answer for it..

Tutorial: How to add exploded view in drawing?

5 0 Intermediate
How to add exploded view in drawing?

How to change from inch im mm in creo 2.0?

5 0 Beginner
tutorial: see the img.

Sweep with multiple sections

3 0 Beginner
For this we have to use swept blend command.

Tutorial - how to make a spiral sphere

3 0 Beginner
This tutorial was compiled with Creo Elements / Direct Express to implement a model similar to my file: http://grabcad.com/library/spiral-sphere You can download a free fully functional copy of Creo from PTC site: http://www.ptc.com/products/creo-elements-direct/modeling-express/ Creo is completely "history-free" and uses the so-called "explicit modeling".

Tutorial - Making text emboss on the curved surface in Creo Elements/Pro aka Pro Engineer Wildfire?

3 1 Beginner
Here is the tutorial.

Tutorial - Modeling Flower in Creo Element aka Pro/Engineer using Surfacing method 2?

2 0 Beginner
Here is the tutorial.

Stacking Your Parts in Z for FDM

2 0 Intermediate
Have long thin flat parts you’ve always wanted to print right on top of each other in FDM but the slicer never allowed you to? Learn how to use this exclusive new feature in GrabCAD Print Pro!

Tutorial - Modeling rope in Creo Elements aka Pro/E

2 0 Beginner
Steps for creating a rope in creo parametric 1.0

Tutorial: How to change the units from inch to mm in CREO?

2 0 Intermediate
ja sam u Creo Parametric 2.0 menjao ovako.. C:\Program Files\PTC\Creo 2.0\Common Files\M070\creo_standards\zatim pokrenuo configure i odabrao 5 (vidi sliku)