Tutorials

  • IronCAD ×
  • Rhino ×
  • GrabCAD Print ×
  • GrabCAD Workbench ×

How to convert CAD files in Workbench

Sar Dar
in Design & CAD
131 49 Beginner
How to convert file formats, such as sldprt and sldasm files, to STEP, IGES, STL, Parasolid (.x_t), ACIS (.sat), JT, or VRML (.wrl)
GrabCAD Workbench sldprt vrml jt acis parasolid stl iges step

How to Manage Printer Materials in GrabCAD Shop

Stratasys
in Design & CAD
0 0 Beginner
GrabCAD Shop allows users to manage their 3D printer materials via the Admin Console and the shop itself as an operator. Please note that only admins have access to the Admin Console.
GrabCAD Print print shop materials grabcad shop

How do i add thickness to a polyline in Rhinoceros 3D

Patel Deepak
in Design & CAD
3 2 Intermediate
hi https://grabcad.com/mark.goody-2, following picture can guide you to add thickness to any curves by adding few simple steps while modelling.
Rhino bending rhino wire

Matte or Glossy? Which Finish to Use for Your 3D Prints and When.

Alexa Nahum
in Modeling
9 0 Beginner
Matte or Glossy? That is the question. PolyJet users often ask themselves whether they should print a part with a matte finish or a glossy finish. And not without reason. The type of finish can totally alter the look, feel, color, and even strength and durability of two otherwise identical parts. Each option has its own benefits and implications that need to be considered. In this tutorial we will give an overview of matte and glossy, compare the pros and cons of each, and offer examples that clearly show what each finish type has to contribute. Finally, we will wrap up with a quick breakdown of when to use what.
GrabCAD Print polyjet disadvantages advantages cons pros support glossy matte

How to measure in Rhino?

Patel Deepak
in Design & CAD
2 2 Intermediate
Dimensions always measure as though the object were projected to the current construction plane. 1. use linear dimension for measuring length and width measurements. 2. use aligned dimension for diagonal measurements.
Rhino

How to FDM Print for Part Sliding Clearance

GrabCAD Tutorials
in Assemblies
13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!
GrabCAD Print sliding clearance printing 3d fdm

Part 1: A Look at Color Proofing

Naftali Eder
in 3D Printing
10 0 Beginner
This tutorial gives some background on color proofing and explains what to do when the color you print doesn't match the color you chose on screen. There will be future tutorials that expand on the topics mentioned here.
GrabCAD Print polyjet stratasys matching rgb cmyk proofing color

Stacking Your Parts in Z for FDM

Stratasys
in Assemblies
2 0 Intermediate
Have long thin flat parts you’ve always wanted to print right on top of each other in FDM but the slicer never allowed you to? Learn how to use this exclusive new feature in GrabCAD Print Pro!
GrabCAD Print fdm stacking stratasys 3d printing software grabcad print pro

How to upload files to GrabCAD Workbench?

Stephen Nyberg
in Design & CAD
1 1 Beginner
Here is how I created a new Workbench project and a few different ways I uploaded SolidWorks files. This is was also my first time using the upload folders option so I came across a few bugs that I am sure will be worked out but they are not a big deal. Please feel free to leave comments if this worked for you or if you have a different or better way to do it. I will tell you how to start your Workbench project and upload SolidWorks files. I am assuming you know how to create your files. For this tutorial, I will upload a .zip file containing all of the part and assembly files. You can make this many ways but one of the best ways is to use the Pack-and-Go option in SW. Many other CAD programs have a similar option and this makes sure all the required files are included.
GrabCAD Workbench workbench upload

how to draw campbell diagram in ansys pls hlp me

harikrushna dodiya
in Design & CAD
3 0 Intermediate
campbell diagram step start from 9 plz see step 9
GrabCAD Workbench

How to create a perforated sheet metal

Bob Heijningen
in Design & CAD
1 1 Intermediate
could be that you want to use rectangular patern. by creating one hole and copying it over the surface of the sheet. i actually never use sheet metal parts but here it goes.
IronCAD perforations

How do i add thickness to a polyline in Rhinoceros 3D

Patel Deepak
in Design & CAD
1 1 Intermediate
hi https://grabcad.com/mark.goody-2, following picture can guide you to add thickness to any curves by adding few simple steps while modelling.
Rhino bending rhino wire

how to draw campbell diagram in ansys pls hlp me

harikrushna dodiya
in Design & CAD
1 0 Intermediate
in modal analysis go to analysis setting than go rotodynamic check coriollis effect on than do campbell diagram on feed your data and solve it
GrabCAD Workbench

Video Tutorials from Rhino 3D Tutorials

Alexandre Galin
in Modeling
6 0 Beginner
A series of little tutorials made available on my Youtube channel. For more detailed Rhino 3D tutorials here's the link https://rhino-3d-classes-from-beginner-to-advanced-lev.teachable.com/
Rhino surfacing 3d rhinoceros taught self tutorials prototyping rhino3d

Introduction to Pave setting, and its basic knowledge.

Beauty Roy Mondal
in Modeling
4 0 Expert
What a Pave Setting Is The pavé setting, pronounced “pa-vay,” comes from the French word “to pave,” as in paved with diamonds. By closely setting small diamonds together with minimal visibility of the tiny metal beads or prongs holding the stones in place, the effect is one of continuous sparkle.
Rhino cam cad modeling fashion jewelry rhino settings diamond setting pave
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.