IronCAD - Top 10 Tips

3 5 Expert
Ten top tips for IronCAD


1 2 Beginner
Demnay.com (https://demnay.com) - Trang dien dan (forum) ca do, ca cuoc truc tuyen giup anh em co cac kien thuc ve bo. Chia se hang ngay nhung tip keo bong da mien phi, tip keo thom, soi cau lo de (XSMB, XSMN, XSMT) cuc uy tin do nha cai va thanh vien cung chia se va thao luan. So dien thoai va zalo: 058.681.2905 Email: demnayvn@gmail.com Web: https://demnay.com Lien he Telegram: @tukimcuong888 Links lien ket: https://twitter.com/demnayvn https://demnayvn.tumblr.com/ https://www.pinterest.ph/demnayvn/_created/ https://www.linkedin.com/in/demnayvn/ https://medium.com/@demnayvn/about https://vk.com/wall721017112?own=1&w=wall721017112_1 https://www.crokes.com/demnayvn/profile/ https://lotus.vn/w/post/966728460947439616.htm https://www.twitch.tv/demnayvn/about https://soundcloud.com/demnayvn https://github.com/demnayvn https://biztime.com.vn/demnayvn https://www.quora.com/profile/Demnayvn https://www.mixcloud.com/demnayvn/ https://gab.com/demnayvn


0 2 Beginner

How to create a perforated sheet metal

1 1 Intermediate
could be that you want to use rectangular patern. by creating one hole and copying it over the surface of the sheet. i actually never use sheet metal parts but here it goes.

Proper Method to Produce Lobster-back Duct Bends

3 1 Beginner
One type of industrial component I have been involved with the design and manufacture of is lobster-back bends. This type of duct bend is made up of segments cut from flat sheets or plates, rolled into cylindrical parts, then assembled. These can be light sheet-metal or manufactured from thick plate. This quick tutorial is a supplement to the one I produced an outline of a method I have used modeling this type of component using Alibre Design. As this supplement concerns producing parts ready for manufacture and applies to whatever software you have used, that is not important as this short tutorial is to outline turning your modeled bend into the flat profile ready to be made into the completed bend. In this modern world, the bend parts will be cut out using CNC laser, or CNC Plasma cutting machines. Sometimes we produce the nc programs ourselves or we are required to produce the correct files for the laser / plasma department to program and cut out. Making the program to cut out the parts starts normally from a 2D dxf file at a scale of 1 : 1. This is the first part of the process that has to be correct. If you produce this dxf incorrectly the finished parts will be useless. Producing this at the right scale, 1 : 1 is different with different 3D cad applications, other problems can be caused by you working in different drawing units. If you are not doing the program, talk to the person who is to make sure you produce the dxf as required. Having a large quantity of wrongly cut parts is not a good thing


3 1 Expert

IronCAD - Linked Cross Sections

0 0 Intermediate
Create independent parts all driven by the one linked cross section