Tutorials

  • Autodesk Inventor ×
  • NX Unigraphics ×
  • solidThinking Evolve ×

LEGO - 01 Basic Dimensions & Bricks Explained

dk
in Modeling
68 9 Intermediate
I get a lot of questions about how I create LEGO parts. This is Part I - The Basics. Most "standard" parts can be created using only simple math. Standard parts consist of square, circular, and angled blocks - regular geometric blocks. I will refer to BrickLink (www.bricklink.com/), but many others use similar methods: Peeron: http://www.peeron.com/ BrickOwl: http://www.brickowl.com/ Brickipedia: http://lego.wikia.com/wiki/LEGO_Wiki etc.
Autodesk Inventor bricks dimensions lego

How do I scale a model in Inventor?

William
in Design & CAD
50 13 Beginner
:)
Autodesk Inventor

How to create spur gear in Siemens NX?

Hegedűs György
in Modeling
37 5 Intermediate
This tutorial presents the modeling of an external spur gear in Siemens NX. The detailed modeling process is demonstrated on this video: https://youtu.be/pVPjDyOn6R4 UPDATE: At ~ 2:40 leave the Limit options at default (At Point). See the errata video for the reason: https://youtu.be/PUpdlyQcaOs
NX Unigraphics gear spur

Tutorial: Convert .stl Mesh to Solid File in Autodesk Inventor

Ioannis Skarlatakis
in Design & CAD
7 7 Beginner
I found today a post from a friend (Nuno) asking how to solve this issue, converting an .stl to solid .ipt. Then I remembered that I found something in the past regarding this conversion... Yeap! it was in Autodesk Labs So let me explain with couple of easy steps how this works...
Autodesk Inventor inventor solid mesh stl convert ipt tipsntricks

Como dimensionar la matriz y los punzones de un troquel de corte

Hugo Martin
in Dimensioning / Tolerancing
6 1 Expert
Con este tutorial pretendemos explicar como dimensionar la matriz y los punzones de un troquel de corte, garantizando la tolerancia de fabricación de la pieza así como logrando la mayor vida útil del troquel.
Autodesk Inventor tolerancias Dimensiones

NX 11:Creating Assembly

Anand Panchal
in Assemblies
14 2 Beginner
A tutorial on Sub assembly and showing arrangements of hydraulic cylinder-piston assembly.
NX Unigraphics sub-assembly cylinder hydraulic arrangements assembly unigraphics nx

How to extrude a text in NX

Alfonso Cerdeño
in Modeling
6 2 Beginner
In this tutorial you will be able to extrude a text and make the text solid.
NX Unigraphics nx text extrude

Tutorial: How to use "bend part" feature in Autodesk Inventor?

Abhijeet
in Design & CAD
8 0 Beginner
Tutorial to use "bend part" feature in Autodesk Inventor.
Autodesk Inventor feature tutorial bend

New approach in designing and modelling an Oil pump using Inventor 2016

Ebrahim Abu Has
in Design & CAD
107 13 Intermediate
Step by step tutorial videos, showing the easy way of modelling an Oil pump using Inventor 2016, how to create the parts, assemble them and drive gears, new approach make use of most Inventor specs, design center with some new tips & tricks ...
Autodesk Inventor ticks tips some splines parallel shafts keyways keys shaft design gears spur

How to create NPT (national pipe taper) threads using inventor

engineer
in Modeling
13 3 Intermediate
I have had people ask me on here how I model npt threads for some of the parts I make, so I figured I would put it out there for others to see as well. Note: if you look at the threaded models I have on this website you will see that I have clearly taken more time on some of them than others, this tutorial will teach you how to do it the right and proper way.
Autodesk Inventor threads npt

Siemens NX 12 Surfacing: Step by Step Tutorial

Shuvam Kumar
in Modeling
23 4 Intermediate
Siemens NX 12 Surfacing Tutorial: Step by Step Tutorial Some Commands 1.Studio Surface 2.Bounded Plane 3.Sew 4.Shell 5.Combined Curve Watch All Video For Full Tutorial Video 1.Siemens NX 12 Surfacing: Step by Step Tutorial Part-1 https://youtu.be/-5c1hRNXSco 2.Siemens NX 12 Surfacing: Step by Step Tutorial Part-2 https://youtu.be/RgXmQEguql0 3.Siemens NX 12 Surfacing: Step by Step Tutorial Part-3 https://youtu.be/3Ym4L3O2e94 4.Siemens NX 12 Surfacing: Step by Step Tutorial Part-4 https://youtu.be/GlIwPYwUpnU 5.Siemens NX 12 Surfacing: Step by Step Tutorial Part-5 https://youtu.be/5RWytrc0PrU
NX Unigraphics tutorial modeling surface nc surfacing 12 nx siemens

Download & Install Siemens NX 1953 Win64 full version

CAD CAM Learning
in Modeling
4 2 Beginner
This video show how to install NX 1953
NX Unigraphics downloadsiemensnx1953 installnx1953 downloadnx1953

How to create break-out section view in Siemens PLM NX?

Hegedűs György
in Drafting
1 1 Beginner
In this two videos you can see two different solutions for the break-out view creation in NX version 10.
NX Unigraphics view section break-out

How to import points from MS Excel in NX?

Hegedűs György
in Design & CAD
3 4 Beginner
Use these scripts to import 3D coordinates from MS Excel file into NX model (unfortunately sample script and files attachments not allowed).
NX Unigraphics excel nx import journal

How to make a sphere in Autodesk Inventor?

Manolis Theofilos
in Design & CAD
2 0 Beginner
As Doug said, revolving a half circle. (the tutorial was made in Inventor pro 2011 but it applies to all versions of Inventor
Autodesk Inventor sphere
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.