Tutorials

Mold Design in NX 10

13 3 Intermediate
Mold Design in NX 10. Without Mold Wizard and fully parametric.

Plastic domain in Nx | Close volume process| A to B conversion

7 3 Intermediate
Created video for plastic domain in nx cad, you can learn how to create close volume in nx cad, conversion of A to B surfaces you can learn from this tutorial

Siemens NX CAD Excellent Surfacing Tutorial - Trimmer Model

6 1 Intermediate
NX Surfacing tutorial for practice. This a Surfacing tutorial of trimmer models in NX CAD. I hope you will enjoy the process of creating and learn something new.

NX 11 Unigraphics tutorial

3 0 Beginner
Hello New video tutorial for beginners, to make this part I used command extrude and revolve. If you start learn NX it's perfect part for you. Thank you for your attention, subscribe and like it's motivated me

How to Turn off Auto Dimension in NX

2 0 Beginner
In this tutorial video of Siemens NX Cad software you'll learn how to disable auto dimensions. Don't forget to Subscribe for more upcoming videos. Thanks for watching.

NX 11 Unigraphics #Fitting

2 1 Beginner
Hello, one more video tutorial for you. Simple part for beginers, it's easy to make and it's perfect to teach somethink new in NX 11. If you want to learn more, subscribe on my channel. Thank you for your suport.

How to pattern curve or shape in Siemens NX

2 0 Beginner
Hello viewers, As many of my viewers suggest me to publish tutorial of sketch. Here it is. Finally, this tutorial will helps those who is starting designing in Siemens NX9. This 5th part of Sketch video include following sub-commands of Sketch, and rest of sub-commands will be in next part. - Pattern Curve (No Shortcut) Have any queries? - comment on it. Like my videos if you are satisfied & for more videos, kindly Subscribe my channel. For any commercial discuss please visit www.rinkeshpatel.com Thank You.

Golf Ball || NX Tutorials

2 0 Beginner
This is a tutorial video of a Golf Ball made in NX 9 CAD Software. In this tutorial i am going to use different tools and techniques of NX Software to create the 3D model. Don't forget to subscribe for more upcoming videos on NX CAD Software.

How to draw Polygon, Ellipse, Conic in Siemens NX

1 0 Beginner
Hello viewers, As many of my viewers suggest me to publish tutorial of sketch. Here it is. Finally, this tutorial will helps those who is starting designing in Siemens NX9. This 4th part of Sketch video include following sub-commands of Sketch, and rest of sub-commands will be in next part. - Polygon (P) - Ellipse (No Shortcut) - Conic (No Shortcut) Have any queries? - comment on it. Like my videos if you are satisfied & for more videos, kindly Subscribe my channel. For any commercial discuss please visit www.rinkeshpatel.com Thank You.

Unigraphics NX-Surface Modeling Example || Feeding Spoon.

1 0 Intermediate
Feeding Spoon Modeling using surface modeling application

NX 10 Sketch Rectangle (Creating a Rectangle Using 'By 2 Points') Lesson 1.0

1 0 Beginner
There are three methods of creating a rectangle: By 2 Points By 3 Points By Center The first method is similar to the Rectangle command outside of the Sketch task environment, creating lines parallel to the X- and Y axes of the Sketch coordinate system. The other two methods allow you to create lines that are not parallel the sketch axes. Regardless of the method used, the lines created are perpendicular to each other.

How to use Chamfer, Fillet, Trim command in Siemens NX

1 0 Beginner
Hello viewers, As many of my viewers suggest me to publish tutorial of sketch. Here it is. Finally, this tutorial will helps those who is starting designing in Siemens NX9. This 2nd part of Sketch video include following sub-commands of Sketch, and rest of sub-commands will be in next part. - Chamfer (No Shortcut) - Fillet (F) - Quick Trim (T) - Quick Extend (E) - Make Corner (No Shortcut) Have any queries? - comment on it. Like my videos if you are satisfied & for more videos, kindly Subscribe my channel. For any commercial discuss please visit www.rinkeshpatel.com Thank You.

Siemens NX - Exercise 13 Tutorial

1 0 Beginner
This is the thirteenth exercise tutorial video made in NX CAD Software. In this tutorial i am going to use different tools and techniques of NX Software to create the 3D model. Don't forget to subscribe for more upcoming videos. ⚫ Subscribe for more Videos https://www.youtube.com/channel/UCweq62mK_L4_HEoO8DvT7Gg?sub_confirmation=1