Tutorials

Create an OBJ Cube With Your Favorite Images

17 2 Beginner
Ever wanted to create a CAD file with your favorite pictures? There are many ways to apply images and textures to CAD files. However, for most of these operations, expensive programs or CAD experience might be required. This tutorial shows you how to make a simple OBJ cube, while explaining some of the basic OBJ nomenclature. It then explains the steps to map pictures on the cube's faces. The only tools you will need is a text editor like notepad and your favorite images!

how to perform analysis test on ansys software

12 1 Intermediate
This is modal analysis of impeller step

Tutorial on Modeling and Simulation of standard gear

6 1 Intermediate
Tutorial on Modeling and Simulation of standard gear...

Creating a Worm Wheel in Creo Parametric 1.0

5 0 Beginner
Here's the answer for it..

Tutorial: How to add exploded view in drawing?

5 0 Intermediate
How to add exploded view in drawing?

How to change from inch im mm in creo 2.0?

5 0 Beginner
tutorial: see the img.

Sweep with multiple sections

3 0 Beginner
For this we have to use swept blend command.

Tutorial - how to make a spiral sphere

3 0 Beginner
This tutorial was compiled with Creo Elements / Direct Express to implement a model similar to my file: http://grabcad.com/library/spiral-sphere You can download a free fully functional copy of Creo from PTC site: http://www.ptc.com/products/creo-elements-direct/modeling-express/ Creo is completely "history-free" and uses the so-called "explicit modeling".

Tutorial - Making text emboss on the curved surface in Creo Elements/Pro aka Pro Engineer Wildfire?

3 1 Beginner
Here is the tutorial.

Tutorial - Modeling Flower in Creo Element aka Pro/Engineer using Surfacing method 2?

2 0 Beginner
Here is the tutorial.

Tutorial - Modeling rope in Creo Elements aka Pro/E

2 0 Beginner
Steps for creating a rope in creo parametric 1.0

Tutorial: How to change the units from inch to mm in CREO?

2 0 Intermediate
ja sam u Creo Parametric 2.0 menjao ovako.. C:\Program Files\PTC\Creo 2.0\Common Files\M070\creo_standards\zatim pokrenuo configure i odabrao 5 (vidi sliku)

Tutorial: Circular Welded Helical Spring

2 0 Beginner
Now Here is the solution to this problem.. Download Model: http://grabcad.com/library/circular-helical-spring

Tutorial - Modeling rope in Creo Elements aka Pro/E

1 0 Beginner
For making simple bended rope we have to follow these steps. 1 Make 4 cylinderical extrusions. 2 Twist them. 3 Bend them.

Rotational Blend in Creo-Parametric 1.0

1 0 Beginner
Here's d Answer