Tutorials

"how to do structural and thermal analysis of disc brake rotor using ansys software

22 2 Intermediate
following step u can do

HOW TO USE BOTH FLOW SIMULATION AND THERMAL ANALISIS IN A HEAT EXCHANGER

21 1 Intermediate
Heat exchanger

Tutorials on Injection Mould Designing

17 0 Beginner
Design of Three Plate Mold an Introduction

How to 3D Print from Adobe Photoshop

16 0 Intermediate
Every sculpture, product, installation and building (successful and unsuccessful) starts with an idea. When it takes physical form, the designer gets valuable aesthetic and practical feedback. Here are some tips on when and how 3D printing can feed this process.

tutorial 6 ( ansys workbench ) / ( cutting tools simulation

14 6 Intermediate
just be aware of that the question input as if ( speed , time , dimension ) is not real it mean you can't use it as academic project . i just wanted to show you the processing of cutting tools simulation therefore with alter input data you can use it as real project . for real input data you can use https://grabcad.com/library/cutting-tools-simulation-1

Does not make standard parts,download them.

12 4 Beginner
Standard parts are not modeled ! Go to side : https://www.tracepartsonline.net/(S(nqfxiakz3pdcrzuhft0mp20g))/content.aspx?home=1&class=TRACEPARTS and FREE download all standard parts ,for all cad software.

Параметризация модели через переменные в "Компас-3D"

11 0 Intermediate
Tutorial relevant for users "Kompas-3D". I don't know if they "Kompas-3D" is used in other countries, but I know "Kompas-3D" most popular in Russia, so further explanation will be in Russian. If you need English version, please comment tutorial, and I make translate. В данной заметке рассмотрено построение параметрической модели на примере корпуса микросхем типа QFP, модель строится в САПР «Компас-3D». Представленный ниже способ - лишь один из многих возможных. И я искренне надеюсь, что кому-то он поможет лучше разобраться 3D моделированием, а кто-то увидит, как оптимизировать процесс. Несмотря на то, что построение модели выполнялось в «Компас-3D», подобные механизмы могут присутствовать и в иных системах, так что возможно пригодится пользователям другого ПО. Описанный ниже способ предполагает наличие определенного навыка работы с 3D моделями, и не содержит подробного описания последовательностей нажатия клавиш, скорее описана методика построения и взаимосвязь объектов.

Basic Symbols Used in Engineering Drawings

9 3 Beginner
Learn about the ways these common features are described in drawings. Counterbore Countersink Spotface Depth Diameter Radius I should also mention that I did not create this course, I just found it online and thought it was pretty well done. https://www.wisc-online.com/learn/career-clusters/stem/eng16204/basic-symbols-used-in-engineering-drawings

Tutorials on Injection Mould Designing

9 1 Beginner
than this

Tutorials on Injection Mould Designing

8 0 Beginner
Ok Today I will Tell you about Shrinkage, Completely

Tutorial: Share Your Skills, Create a Tutorial on GrabCAD

5 5 Beginner
This is how you can create tutorials for the GrabCAD community!

Design of Press tools

6 0 Intermediate
Cutting Clearance between Punch and die in Press tool

Draw Third Angle Orthographic Projection

5 0 Beginner
Shows how to make a third angle orthographic projection from isometric projection.

How to make herringbone gear in autocad

4 0 Intermediate
Here is complete video showing each step to model 3d herringbone gear with autocad, https://www.youtube.com/watch?v=p7nzrRZcR1s you can find lots more similar tutorials here http://www.sourcecad.blogspot.com