Tutorials

"how to do structural and thermal analysis of disc brake rotor using ansys software

22 2 Intermediate
following step u can do

HOW TO USE BOTH FLOW SIMULATION AND THERMAL ANALISIS IN A HEAT EXCHANGER

21 1 Intermediate
Heat exchanger

Tutorials on Injection Mould Designing

17 0 Beginner
Design of Three Plate Mold an Introduction

How to 3D Print from Adobe Photoshop

16 0 Intermediate
Every sculpture, product, installation and building (successful and unsuccessful) starts with an idea. When it takes physical form, the designer gets valuable aesthetic and practical feedback. Here are some tips on when and how 3D printing can feed this process.

tutorial 6 ( ansys workbench ) / ( cutting tools simulation

15 6 Intermediate
just be aware of that the question input as if ( speed , time , dimension ) is not real it mean you can't use it as academic project . i just wanted to show you the processing of cutting tools simulation therefore with alter input data you can use it as real project . for real input data you can use https://grabcad.com/library/cutting-tools-simulation-1

Tutorial Camera Mold in PowerShape

12 2 Intermediate
Tutorial Camera Injection Mold in PowerShape from Autodesk; Available to download in https://grabcad.com/library/camera-mold-sergio-cad-cam-1 #tutorial #injection #mold #mould #powershape #surface

Does not make standard parts,download them.

12 4 Beginner
Standard parts are not modeled ! Go to side : https://www.tracepartsonline.net/(S(nqfxiakz3pdcrzuhft0mp20g))/content.aspx?home=1&class=TRACEPARTS and FREE download all standard parts ,for all cad software.

TUTORIAL SOAP BOX MOLD POWERSHAPE

10 0 Intermediate
TUTORIAL SOAP BOX INJECTION MOLD IN POWERSHAPE; Available to Download in Grabcad: https://grabcad.com/library/soap-box-mold-sergio-cad-cam-1 credits to: https://grabcad.com/library/soapbox-7 by https://grabcad.com/v.rajesh-1 #TUTORIAL #MOLD #MOULD #POWERSHAPE #STEPS

Basic Symbols Used in Engineering Drawings

9 3 Beginner
Learn about the ways these common features are described in drawings. Counterbore Countersink Spotface Depth Diameter Radius I should also mention that I did not create this course, I just found it online and thought it was pretty well done. https://www.wisc-online.com/learn/career-clusters/stem/eng16204/basic-symbols-used-in-engineering-drawings

Tutorials on Injection Mould Designing

9 1 Beginner
than this

Tutorials on Injection Mould Designing

8 0 Beginner
Ok Today I will Tell you about Shrinkage, Completely

Design of Press tools

7 0 Intermediate
Cutting Clearance between Punch and die in Press tool

Tutorial: Share Your Skills, Create a Tutorial on GrabCAD

5 5 Beginner
This is how you can create tutorials for the GrabCAD community!

Draw Third Angle Orthographic Projection

5 0 Beginner
Shows how to make a third angle orthographic projection from isometric projection.