Tutorials

Robotic Tank Tread Assembly- Fusion 360 Tutorial (Tracked Robot Part 2)

10 3 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Buy this chain: https://amzn.to/3f2FZEl In this series, we will design and develop a tracked, tank-like mobile robot optimized for use on sand and in desert environments. The modeling of the treads, custom sprocket, idler rollers and 3D printed suspension system will be shown in great detail. We will first create the chain links themselves and the tread pieces, then pattern them along the shape of the loop. Once we finish this, we will create the custom sprocket and motor connection followed by the idler spindle and finally the suspension system. In the end, we can mirror our entire assembly to the other side to create the right side tread. Working on only one side at a time makes it easier on our computers and allows us to work faster with less lag-time.

Basic Tutorial for AutoCAD

28 3 Intermediate
This Tutorial will give you idea about basic introduction about AutoCAD, user guide tutorial for tools, best practices, applications. This tutorial is the web series for basic AutoCAD so follow up for the next file. Hit like if it is useful.

How to Use Threaded Inserts in Your 3D Printed Parts- Example with DC Motor in Fusion 360

3 2 Beginner
This tutorial illustrates the modeling and use of threaded bras inserts in 3d printed parts and set screws to clamp down on DC motor flats.

AutoCAD - Complete Tutorial for Beginners - Exercises 3

1 1 Intermediate
COMPLET COUESH FOR 100 EXERCISEC FUNCTION KEY:- Ø ESC : To cancel Command Ø F1 : Autocad Help Ø F2 : Text Window on/off To see recently used command, options, Points. Ø F3 : Osnap button on/off. Ø F4 : Tablet on/off (Autocad 2010 & Prior Versions) 3DOSNAP ON/OFF (Autocad 2011 & Autocad 2012) Ø F5 : To change isoplane in isometric drawing. Ø F6 : DUCS (Dynamic user co-ordinate system) button on/off. Ø F7 : Grid button on/off. By default grid spacing is 0.5 inch in X- direction and Y direction. Ø F8 : Ortho button on/off. Ø F9 : Snap button on/off If snap button is on mode from status bar than cursor will be Jump on the graphic one dot to another dot. Ø F10 : Polar button on/off. (Alternate off ortho button) Ø F11 : Otrack button on/off. (object snap tracking) Ø F12 : DYN button on/off. (Dynamic input) Short cut keys:- Ø Ctrl+A : select all Ø Ctrl+B : Snap on/off Ø Ctrl+C : Copy objects to clipboard Ø Ctrl+D : Dynamic UCS (DUCS) on/off Ø Ctrl+E : To change isoplane in isometric Ø Ctrl+F : Osnap on/off Ø Ctrl+G : Grid on/off Ø Ctrl+H : Set variable Ø Ctrl+I : Co-ordinate on/off Ø Ctrl+J : Repeat Last Command Ø Ctrl+K : Hyperlink Command Ø Ctrl+L : Ortho on/off Ø Ctrl+M : Repeat Last Command Ø Ctrl+N : To create new autocad file Ø Ctrl+O : To open autocad file Ø Ctrl+P : To print/plot autocad file Ø Ctrl+Q : To Quit/Exit from autocad Ø Ctrl+R : To cycle between viewports Ø Ctrl+S : To save autocad file Ø Ctrl+T : Tablet on/off Ø Ctrl+U : Polar on/off Ø Ctrl+V : Paste objects from clipboard Ø Ctrl+W : Otrack on/off (Autocad 2010 & prior ver.) Ø Ctrl+W : Selection cycling on/off (New Autocad 2011) Ø Ctrl+X : Cut objects to clipboard Ø Ctrl+Y : Redo Ø Ctrl+Z : Undo Ø Ctrl+0 : Clean Screen Ø Ctrl+1 : Properties Ø Ctrl+2 : Autocad design center Ø Ctrl+3 : Tool Palettes Ø Ctrl+4 : Sheet set Manager Ø Ctrl+5 : Info palette ( not working from Acad2008) Ø Ctrl+6 : Database Connect Ø Ctrl+7 : Markup set manager Ø Ctrl+8 : Quick calculator Ø Ctrl+9 : Show /Hide Commandline Window Ø Ctrl+Shift+C : Copy objects With basepoint Ø Ctrl+Shift+E : Presspull Command Ø Ctrl+Shift+H : Show /Hide Commandline window Ø Ctrl+shift+P : Quick properties Ø Ctrl+Shift+S : Save as Autocad file Ø Ctrl+Shift+V : Paste as block #Complete Tutorial for Beginners #AutoCAD - SolidWorks Beginners Tutorials - SolidWorks Sketching - SolidWorks Surface - SolidWorks Weldments - SolidWorks Assembly - SolidWorks Drawing - SolidWorks Sheet Metal - SolidWorks Mold Design - SolidWorks Simulation - SolidWorks Motion please subscribe our channel for more videos & projects in solidworks & dont forget to hit like & share the videos, thanks for watching.

Tutorial on AutoCAD Practice Design #7 | 2D Drafting

1 1 Beginner
In this AutoCAD video tutorial for beginners will guide you step by step to design the object.

Where To Get Texture Material | Make Own Custom Material Fusion 360 | 2021 |

5 1 Beginner
Hi Guys, In this video, I am going to tell you that how can you Learn Where To Get Texture Material | Make Own Custom Material Fusion 360 | 2021 | I have taught you how to Where To Get Texture Material | Make Own Custom Material Fusion 360 | 2021 | which will make you understand in simple way. If you want to learn Fusion 360 software and If you want more tutorials, Then you can also subscribe my Youtube Channel, Whose link I have given you below. My Youtube Channel Name is: Ahuja Technical Hant https://youtu.be/E7LpU4vcgq8

AutoCAD - Complete Tutorial for Beginners - Complete Tutorial for Beginners

1 1 Expert
COMPLET COUESH FOR 100 EXERCISEC FUNCTION KEY:- Ø ESC : To cancel Command Ø F1 : Autocad Help Ø F2 : Text Window on/off To see recently used command, options, Points. Ø F3 : Osnap button on/off. Ø F4 : Tablet on/off (Autocad 2010 & Prior Versions) 3DOSNAP ON/OFF (Autocad 2011 & Autocad 2012) Ø F5 : To change isoplane in isometric drawing. Ø F6 : DUCS (Dynamic user co-ordinate system) button on/off. Ø F7 : Grid button on/off. By default grid spacing is 0.5 inch in X- direction and Y direction. Ø F8 : Ortho button on/off. Ø F9 : Snap button on/off If snap button is on mode from status bar than cursor will be Jump on the graphic one dot to another dot. Ø F10 : Polar button on/off. (Alternate off ortho button) Ø F11 : Otrack button on/off. (object snap tracking) Ø F12 : DYN button on/off. (Dynamic input) Short cut keys:- Ø Ctrl+A : select all Ø Ctrl+B : Snap on/off Ø Ctrl+C : Copy objects to clipboard Ø Ctrl+D : Dynamic UCS (DUCS) on/off Ø Ctrl+E : To change isoplane in isometric Ø Ctrl+F : Osnap on/off Ø Ctrl+G : Grid on/off Ø Ctrl+H : Set variable Ø Ctrl+I : Co-ordinate on/off Ø Ctrl+J : Repeat Last Command Ø Ctrl+K : Hyperlink Command Ø Ctrl+L : Ortho on/off Ø Ctrl+M : Repeat Last Command Ø Ctrl+N : To create new autocad file Ø Ctrl+O : To open autocad file Ø Ctrl+P : To print/plot autocad file Ø Ctrl+Q : To Quit/Exit from autocad Ø Ctrl+R : To cycle between viewports Ø Ctrl+S : To save autocad file Ø Ctrl+T : Tablet on/off Ø Ctrl+U : Polar on/off Ø Ctrl+V : Paste objects from clipboard Ø Ctrl+W : Otrack on/off (Autocad 2010 & prior ver.) Ø Ctrl+W : Selection cycling on/off (New Autocad 2011) Ø Ctrl+X : Cut objects to clipboard Ø Ctrl+Y : Redo Ø Ctrl+Z : Undo Ø Ctrl+0 : Clean Screen Ø Ctrl+1 : Properties Ø Ctrl+2 : Autocad design center Ø Ctrl+3 : Tool Palettes Ø Ctrl+4 : Sheet set Manager Ø Ctrl+5 : Info palette ( not working from Acad2008) Ø Ctrl+6 : Database Connect Ø Ctrl+7 : Markup set manager Ø Ctrl+8 : Quick calculator Ø Ctrl+9 : Show /Hide Commandline Window Ø Ctrl+Shift+C : Copy objects With basepoint Ø Ctrl+Shift+E : Presspull Command Ø Ctrl+Shift+H : Show /Hide Commandline window Ø Ctrl+shift+P : Quick properties Ø Ctrl+Shift+S : Save as Autocad file Ø Ctrl+Shift+V : Paste as block #Complete Tutorial for Beginners #AutoCAD - SolidWorks Beginners Tutorials - SolidWorks Sketching - SolidWorks Surface - SolidWorks Weldments - SolidWorks Assembly - SolidWorks Drawing - SolidWorks Sheet Metal - SolidWorks Mold Design - SolidWorks Simulation - SolidWorks Motion please subscribe our channel for more videos & projects in solidworks & dont forget to hit like & share the videos, thanks for watching.

Autodesk Fusion 360 - Sketch - Швидко та легко

6 1 Intermediate
-Цей короткий путівник по роботі у Fusion 360 заборонено перекладати на російську мову, робити рерайти або публікувати на сторонніх ресурсах інформації без згоди автора. Даний туторіал посвячений тільки роботі з інструментами креслення. По мірі написання уроків, буду добавляти окремі Tutorials по роботі з твердотільним моделюванням та роботі з листовим металом. -Автор усіх матеріалів - Рисан Василь Васильович, м.Івано-Франківськ, Україна. -e-mail: Ifin3d.info@gmail.com -instagram: https://www.instagram.com/ifin3d/ -facebook: https://www.facebook.com/akeyro95

Assemble a Sprocket to a DC Motor: Fusion 360 Tutorial

1 1 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360

Auto CAD 3D: exercise 5

1 1 Beginner
I hope this video useful for everyone want to become professional design of engineer I have a channel in youtube about CAD 3D, I hope this useful for you: https://www.youtube.com/channel/UCw_Zp8rsvtI01SnhkM_4FAw

How to design a Wooden Study Table using Autodesk Fusion 360 :)

3 1 Beginner
Hello everyone, in this video i have demonstrated how anyone can make a Wooden Study Table using Fusion 360. and the dimensions for this model i have taken arbitrary as the model is build just for teaching and learning purpose. and i have used very simple tools like extrude and offset to make this model. so follow the video till last to make a table exactly like shown in the video. And I hope you enjoyed the designing process and the model. if you enjoyed the process and model, then hit subscribe and like the video. and don't forget to comment your views on this model.

surface design in fusion 360

4 1 Beginner
here you can find how to use surface revolve and trim in patch using fusion 360

Tutorial - Making spur gear in AutoCAD?

5 1 Beginner
Here is the Tutorial.

Tesla Cybertruck in Fusion 360!

10 1 Beginner
#CyberTruck #TeslaCyberTruck #Tesla Model a block shaped like the Tesla Cyber Truck (what it appears to look like from photos). This tutorial is "just for fun" and is very unlike all of the other tutorials on this channel. I butchered it...

Disc CAM - Fusion 360 Tutorial

2 1 Beginner
Since there isn't any feature in Fusion 360 to create cam mechanism, so in this video i will show how to create a disc cam based from the displacement diagram.