Tutorials

  • Autodesk Maya ×
  • IronCAD ×
  • Powershape ×

Tutorial Camera Mold in PowerShape

Sérgio CAD CAM
in Modeling
18 2 Intermediate
Tutorial Camera Injection Mold in PowerShape from Autodesk; Available to download in https://grabcad.com/library/camera-mold-sergio-cad-cam-1 #tutorial #injection #mold #mould #powershape #surface
Powershape injection molde mould mold powershape tutorial

TUTORIAL SOAP BOX MOLD POWERSHAPE

Sérgio CAD CAM
in Modeling
16 0 Intermediate
TUTORIAL SOAP BOX INJECTION MOLD IN POWERSHAPE; Available to Download in Grabcad: https://grabcad.com/library/soap-box-mold-sergio-cad-cam-1 credits to: https://grabcad.com/library/soapbox-7 by https://grabcad.com/v.rajesh-1 #TUTORIAL #MOLD #MOULD #POWERSHAPE #STEPS
Powershape molde mould powershape tutorial injection mold

Building Mini Morris Cooper

PabloModelkits
in Modeling
7 3 Expert
Insane detail level modeling this Mini Morris Cooper. Leave you comments and questions, I will be happy to answer.
Autodesk Maya montecarlo rally iconic car classic cooper morris mini automotive

Junk sail boat | 3d modeling timelapse

PabloModelkits
in Modeling
3 0 Expert
Time lapse 3d modeling of a Junk Sail Boat. Feel free to leave you comments!
Autodesk Maya maya autodesk modeling 3d boat sail junk

IronCAD - Top 10 Tips

Nick
in Modeling
3 5 Expert
Ten top tips for IronCAD
IronCAD hints tips ironcad

Volkswagen Van Type 23 | Time lapse

PabloModelkits
in Modeling
2 0 Expert
Here is a van that reminds to peace the Volkswagen Type 23.
Autodesk Maya lapse time van 23 type volkswagen

KTM (Streetfighter )

I'M A DESIGNER
in Modeling
2 0 Expert
Tuto n°61 - KTM (Streetfighter ) sur Autodesk Maya https://www.youtube.com/watch?v=8vGN83WWMIc
Autodesk Maya

Bristol 450 2L. Time lapse modeling

PabloModelkits
in Modeling
2 0 Expert
Rare care that participate in Le Mans. Team: Bristol Aeroplane Co. Le Mans 24 Hours (June 11 - 12) Drivers: Peter S. Wilson & Jim Mayers
Autodesk Maya maya autodesk modeling mans le 450 car bristol

IronCAD - Using the Co-ordinate system to create a section

Nick
in Modeling
2 0 Intermediate
Use the Co-Ordinate systems to create a section plane. This is a handy alternative the section tool, as it does not cut the solid model.
IronCAD section cross

Bottle - PowerShape Reverse Engineering workflow

Didi Widya Utama
in Modeling
2 0 Intermediate
This video shows workflow of Reverse Engineering Process, start from scanning the physical model and surface creation in Powershape. the scanner i used was Roland Picza 3D scanner if someone interested to learn and try , i could send you the stl scanned data file , just write your request in the comments below hope it, enjoy a happy learning. thanks
Powershape powershape engineering reverse study learning modeling 3d tutorial

How to create a perforated sheet metal

Bob Heijningen
in Design & CAD
1 1 Intermediate
could be that you want to use rectangular patern. by creating one hole and copying it over the surface of the sheet. i actually never use sheet metal parts but here it goes.
IronCAD perforations

Modeling Windmill time lapse

PabloModelkits
in BOM
1 0 Expert
Building a windmill with volumetric light in Autodesk Maya.
Autodesk Maya autodesk maya light volumetric windmill

IRONCAD Training 01-04 | Drag & Drop Modeling

Emil.Rindell
in Modeling
1 0 Beginner
Four videos that describes the Drag & Drop Modeling basics in IRONCAD.
IronCAD training triball easy cad user friendly beginner 3d cad ironcad

IronCAD - Linked Cross Sections

Nick
in Modeling
0 0 Intermediate
Create independent parts all driven by the one linked cross section
IronCAD section cross linked ironcad structural

IronCAD - Multifeature part from one Cross Section

Nick
in Modeling
0 0 Intermediate
Create a pipe section with flanges at each end, using one circle to drive the bore diameter with flange OD offset from this.
IronCAD mechanical section cross pipe ironcad
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.