Tutorials

How do i add thickness to a polyline in Rhinoceros 3D

3 2 Intermediate
hi https://grabcad.com/mark.goody-2, following picture can guide you to add thickness to any curves by adding few simple steps while modelling.

How to measure in Rhino?

2 2 Intermediate
Dimensions always measure as though the object were projected to the current construction plane. 1. use linear dimension for measuring length and width measurements. 2. use aligned dimension for diagonal measurements.

Proper Method to Produce Lobster-back Duct Bends

3 1 Beginner
One type of industrial component I have been involved with the design and manufacture of is lobster-back bends. This type of duct bend is made up of segments cut from flat sheets or plates, rolled into cylindrical parts, then assembled. These can be light sheet-metal or manufactured from thick plate. This quick tutorial is a supplement to the one I produced an outline of a method I have used modeling this type of component using Alibre Design. As this supplement concerns producing parts ready for manufacture and applies to whatever software you have used, that is not important as this short tutorial is to outline turning your modeled bend into the flat profile ready to be made into the completed bend. In this modern world, the bend parts will be cut out using CNC laser, or CNC Plasma cutting machines. Sometimes we produce the nc programs ourselves or we are required to produce the correct files for the laser / plasma department to program and cut out. Making the program to cut out the parts starts normally from a 2D dxf file at a scale of 1 : 1. This is the first part of the process that has to be correct. If you produce this dxf incorrectly the finished parts will be useless. Producing this at the right scale, 1 : 1 is different with different 3D cad applications, other problems can be caused by you working in different drawing units. If you are not doing the program, talk to the person who is to make sure you produce the dxf as required. Having a large quantity of wrongly cut parts is not a good thing

Tutorials:-Working with Power MILL " PART I" To Generate the Programs(G-coded & M-coded) For Various CNC Machines.

8 1 Beginner
Let Start With Beginning..

Tutorial: How to convert spline into a lines and arcs?

0 0 Beginner
For Circle spline.

Tutorials:-Working with Power MILL " PART II" Machining Setup

3 0 Beginner
Here is the Next Part of Working with Power Mill.. Follow the Steps and You will found your way with Power Mill. Some text are Referenced from Book and Online Training Tutorials Thanks and Enjoy..!!

Tutorials:-Working with Power MILL "PART III" 3D Area Clearance.

2 0 Beginner
next here

Tutorials:-Working with Power MILL " PART I" To Generate the Programs(G-coded & M-coded) For Various CNC Machines.

2 0 Beginner
After Step 12 here the Remain Things you Have to do...:-

Mastercam 2021 (CAD+CAM)

6 2 Intermediate
Mastercam 2021 3D Modeling tutorial

Tutorial: How to convert spline into a lines and arcs?

1 0 Beginner
Another option but in this case I will convert randomly shape splines

How do i add thickness to a polyline in Rhinoceros 3D

1 1 Intermediate
hi https://grabcad.com/mark.goody-2, following picture can guide you to add thickness to any curves by adding few simple steps while modelling.

Lobsterback Duct Bends Sheetmetal Method

1 0 Beginner
This is the method I use to construct lobster back bends with sheet metal tools that I can produce flat patterns from, These flat patterns can then be used to produce files for CNC profile cutting machines. I have come across other ways of doing this using surfaces, thickened and turned into sheet metal parts. The software I am using is Alibre Design. As the version I have is low on surfacing tools I have found this a good way to model lobster back bends, which I have been involved with the design and manufacture for many years.

Video Tutorials from Rhino 3D Tutorials

6 0 Beginner
A series of little tutorials made available on my Youtube channel. For more detailed Rhino 3D tutorials here's the link https://rhino-3d-classes-from-beginner-to-advanced-lev.teachable.com/

How do I change the scale in a DXF when I import it into Mastercam?

2 1 Beginner
Here is what I did. Sorry about my bad english.

Introduction to Pave setting, and its basic knowledge.

4 0 Expert
What a Pave Setting Is The pavé setting, pronounced “pa-vay,” comes from the French word “to pave,” as in paved with diamonds. By closely setting small diamonds together with minimal visibility of the tiny metal beads or prongs holding the stones in place, the effect is one of continuous sparkle.