Tutorials

How do i add thickness to a polyline in Rhinoceros 3D

3 2 Intermediate
hi https://grabcad.com/mark.goody-2, following picture can guide you to add thickness to any curves by adding few simple steps while modelling.

How to measure in Rhino?

2 2 Intermediate
Dimensions always measure as though the object were projected to the current construction plane. 1. use linear dimension for measuring length and width measurements. 2. use aligned dimension for diagonal measurements.

Tutorials:-Working with Power MILL " PART I" To Generate the Programs(G-coded & M-coded) For Various CNC Machines.

8 1 Beginner
Let Start With Beginning..

Tutorial: How to convert spline into a lines and arcs?

0 0 Beginner
For Circle spline.

Tutorials:-Working with Power MILL " PART II" Machining Setup

3 0 Beginner
Here is the Next Part of Working with Power Mill.. Follow the Steps and You will found your way with Power Mill. Some text are Referenced from Book and Online Training Tutorials Thanks and Enjoy..!!

Tutorials:-Working with Power MILL "PART III" 3D Area Clearance.

2 0 Beginner
next here

Tutorials:-Working with Power MILL " PART I" To Generate the Programs(G-coded & M-coded) For Various CNC Machines.

2 0 Beginner
After Step 12 here the Remain Things you Have to do...:-

Mastercam 2021 (CAD+CAM)

6 2 Intermediate
Mastercam 2021 3D Modeling tutorial

Tutorial: How to convert spline into a lines and arcs?

1 0 Beginner
Another option but in this case I will convert randomly shape splines

How do i add thickness to a polyline in Rhinoceros 3D

1 1 Intermediate
hi https://grabcad.com/mark.goody-2, following picture can guide you to add thickness to any curves by adding few simple steps while modelling.

Video Tutorials from Rhino 3D Tutorials

6 0 Beginner
A series of little tutorials made available on my Youtube channel. For more detailed Rhino 3D tutorials here's the link https://rhino-3d-classes-from-beginner-to-advanced-lev.teachable.com/

How do I change the scale in a DXF when I import it into Mastercam?

2 1 Beginner
Here is what I did. Sorry about my bad english.

Introduction to Pave setting, and its basic knowledge.

4 0 Expert
What a Pave Setting Is The pavé setting, pronounced “pa-vay,” comes from the French word “to pave,” as in paved with diamonds. By closely setting small diamonds together with minimal visibility of the tiny metal beads or prongs holding the stones in place, the effect is one of continuous sparkle.

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

1 0 Intermediate
Z Heights Skim and Plunge distance provide variable control of rapid move heights within a component. These operate in conjunction with Safe Z and Start Z to minimize slow and unnecessary movement of the tool in fresh air while machining the component form. Skim distance – An incremental distance above the model at which rapid moves occur from the end of one tool track to the start of the next. The tool rapids across the model clearing the highest point along its route by the Skim value. Plunge distance – An incremental distance above the local component surface where a downward rapid movement of a tool changes to plunge rate.

How to measure in Rhino?

0 0 Intermediate
hi, https://grabcad.com/shawn.norbert-1 Once the dimensions are created , if you want to edit the dimesion just double click ( Left mouse button) and write/ label the desired text. There is another way for editing dimensions, use command # object properties