Tutorials

Industrial/steampunk lamp with 3D printed parts

25 4 Intermediate
Industrial/steampunk lamp with 3D printed parts

Airplane propeller - ceiling lamp – 3D printed project

44 2 Intermediate
3D printed airplane propeller as a ceiling lamp (decoration). Project is not finished yet, bulb has to be added, some kind of holder, electricity...

How to model a lamp in SolidWorks?

0 0 Beginner
In this tutorial I’ll show you how to create one of these beautiful lamps in SolidWorks,with only 14 steps. Commands you’ll use: Sweep, Extrude, Revolve, Fillet. Time to complete: abt 15 min.

LAMP Holder

3 0 Intermediate
A lamp holder is the device for holding a light bulb or lamp. Most light fittings or luminaires have a lamp holder. For wall and ceiling lights with a fixed lamp holder, it's important that the lamp holder is compatible with the type of bulb you want to use. 1. Use Lofted Surface command to create this holder. There are three guide curves and three profile curves. 2. Circular pattern to copy this surface with 8 instances. 3. Add planar surface at the top and extruded surface at the bottom. 4. Knit surface to change become solid 5. Shell command with 1.5 mm of thickness May be useful Thank you

Square LAMP Holder

1 0 Intermediate
Lamp Holder with the square model. Using command: 1. Extruded boss 2. Sweep surface 3. Split 4. Split line 5. Offset surface 6. Shell 7. Rib 8. Hole wizard

LAMP DESIGN.

2 0 Beginner
LAMP DESIGN. Light & Shadow. See video: https://www.youtube.com/watch?v=esnyU7ws4Fc

Solidworks Tutorial #138 How to Model a Ovals Lamp Shade Design in Solidworks by SW Easy Design

4 0 Intermediate
in this tutorial use very unique tricks watch this video and learn some tricks...........\ this tutorial is very useful ....................................... if u like then hit button ,,,,,,,,,,,, We Provide SolidWorks, Auto-CAD,(Mechanical Drawing 3D Design,Catia V5......etc Software Free Tutorials. You can subscribe our channel to get more information.

Table lamp modeling in solidworks

1 0 Intermediate
I made this simple table using solidworks 2016.

SolidWorks Tutorial Screen Lamp 3D Print - ARPSolidWorks

0 0 Intermediate
SolidWorks Tutorial Screen Lamp 3D Print. How to make a lamp screen 3d print in solidworks, explained step by step in Spanish, I hope you like it. ▶ You can leave a 👍 and subscribe here → https://goo.gl/hKNGky ▶ Activate the 🔔 to find out about all the videos.

Tutorial - Modeling Lamp shade in SolidWorks method 2?

0 0 Beginner
Here is the tutorial.

How to Draw Lamp Cover Without Create Hole

0 0 Intermediate
No need create hole first to draw this lamp cover. But just rotate the reinforcement.

How to Draw a LED BULB

0 0 Beginner
You will learn step by step how to draw a Led Bulb. Consist of fitting, body and cover. And added with knock down system to connect between body and cover.

Solidworks: Lamp

3 0 Beginner
I hope this video useful for everyone want to become professional design of engineer I have a channel in youtube about CAD 3D, I hope this useful for you: https://www.youtube.com/channel/UCw_Zp8rsvtI01SnhkM_4FAw

Tutorial - Modeling Lamp shade in SolidWorks method 1?

1 0 Beginner
Here is the tutorial.

Tutorial - Modeling Lamp shade in Creo Elements/Pro aka Pro/Engineer Wildfire?

0 0 Beginner
Here is the tutorial.