Tutorials

How to use Swept Boss/Base Feature - SolidWorks Tutorial

Tech Hawk
in Drafting
2 0 Beginner
In this tutorial you will create swept part using Swept Boss/Base tool. 1.Click New. Click Part,OK. 2.Click Top Plane and click on Sketch. 3.Click Circle and sketch a circle origin as it center. Click Smart Dimension, dimension sketched circle diameter as your wish if you want 4.Exit Sketch. 5.Take a plane normal to spline end (or Click on Front Plane and click Sketch.) 6.Click on View Orientation-Normal To. 7.Zoom out the sketch, click on Spline and sketch a curve as sketched below. 8.Exit Sketch. 9.Click View Orientation--Isometric. 10. Click Features-Swept Boss/Base. For swept profile select Sketch1 (circle) and for path click on Sketch2 (curve). and . Done!
SOLIDWORKS tutorial path profile boss swept hawk tech solidworks

2D into 3D Modeling - Part design training - Autodesk INVENTOR - Exercise

Bocko Schuger
in Design & CAD
3 2 Beginner
Look how it looks this 2d drawing in 3D as a body !
Autodesk Inventor exercise basics inventor autodesk modeling 3d into 2d thread with hole holle chamfer mirror insert plane cut boss extrude

SOLIDWORKS - Exercise: 2D into 3D Modeling - Part design training -

Bocko Schuger
in Modeling
6 0 Beginner
Please, look, how it looks this 2d drawing in 3D as a body, watching this video. https://youtu.be/Q8wlGo8aJUo Thanks.
SOLIDWORKS exercise basics solidworks modeling 3d into 2d thread with hole mirror plane boss extrude

2D into 3D Modeling - Part design training - SOLIDWORKS - Exercise

Bocko Schuger
in Modeling
4 2 Beginner
Look how it looks this 2d drawing in 3D as a body !
SOLIDWORKS extrude boss cut plane insert mirror chamfer holle hole with thread 2d into 3d modeling solidworks basics exercise

SolidWorks Advanced 3D Part Modeling Tutorial

jehan kothari
in Modeling
8 0 Intermediate
In this video, we are going to create a 3d Model from 2D Drawing. Rib, Boundary Boss, Loft Cut, Symmetric pattern, Hole Wizard are the command that are used in this video. I hope it will escalate your 3d modeling skills.
SOLIDWORKS rib wizard hole cut loft boss boundary modeling 3d advanced solidworks

How to create a rim of an Audi R8 ?

Fateh MERRAD
in Design & CAD
16 1 Beginner
.
SOLIDWORKS solidworks grabcad boss sketch tutorial surfacique

Extruded boss on the sphere - SolidWorks - Exercise - 2D into 3D solid modeling

Bocko Schuger
in Design & CAD
4 0 Beginner
In this guide are displayed SolidWorks steps that are required for extruded boss to the sphere surface and modeling of the overall model based on technical drawings. 2D into 3D solid modeling. Example of exercise.
SOLIDWORKS 3d into 2d plane solidworks boss sphere extruded

Autodesk INVENTOR - Exercise - 2D into 3D Modeling

Bocko Schuger
in Design & CAD
1 0 Beginner
In this guide are displayed ADESK INVENTOR steps modeling based on technical drawings 2D into 3D modeling. The 2D drawing is cover pump. Example of exercise/Part Design training. Basic features: Boss-Extrude, Shell, Mirror, Hole, Hole with thread, Circular Pattern, Rectangular Pattern, Fillet. Basic entities of the sketches: Line, Circle, Rectangle Fillet. Reference elements: Offset plane.
Autodesk Inventor circular pattern rectangular thread with hole cut shell boss extrude

Extruded boss on the sphere - CATIA V5 Exercise - 2D into 3D modeling

Bocko Schuger
in Design & CAD
1 0 Beginner
In this guide are displayed CATIA V5 steps that are required for extruded boss/base to the sphere surface and modeling of the overall model based on technical drawings. 2D into 3D solid modeling. Example of exercise. 3D Modeling: Features to be used: Sketch, Shaft, Boss-Extrude, Reference Geometry - Plane, Linear Pattern, Mirror Feature, Mirror Body, Hole, Hole with thread.
CATIA 3d into 2d shaft surfaces tangent plane boss sphere extruded

6 tutorials (3D model) for intermediate designers

AMMAR LAKMUS
in Modeling
6 3 Intermediate
6 tutorials (3D model) for intermediate designers to download: https://drive.google.com/file/d/15R_7Hg1SEVwwGmlpql_sDw2GIIbCf5vH/view?usp=sharing
SOLIDWORKS tutorial boss cut rip extruded draft model 3d

Extruded boss on the sphere - ADESK INVENTOR - Exercise - 2D into 3D Modeling

Bocko Schuger
in Design & CAD
2 2 Beginner
In this guide are displayed ADESK INVENTOR steps that are required for extruded boss to the sphere surface and modeling of the overall model based on technical drawings. 2D into 3D solid modeling. Example of exercise.
Autodesk Inventor inventor autodesk thread with hole surface tangent plane boss sphere extruded

How to Use SolidWorks Revolved Boss/ Base Feature

Tech Hawk
in Design & CAD
2 0 Beginner
In this video you will discover which you need to know about the revolve feature. This feature is used to revolve a 2D sketch along an Axis or Centerline.
SOLIDWORKS boss revolved beginner revolve solidworks hawk tech

Extruded boss on the sphere - SolidWorks

Bocko Schuger
in Design & CAD
0 0 Beginner
In this guide are displayed steps that are required for extruded boss to the sphere surface for beginners in SolidWorks.
SOLIDWORKS plane solidworks boss sphere extruded

Tutorial:Using mounting boss fastening feature in Solidworks.

Abhijeet
in Design & CAD
0 0 Beginner
Tutorial:Using mounting boss fastening feature in Solidworks.
SOLIDWORKS feature boss fastening tutorial mounting

Tutorial - Mounting boss feature in SolidWorks?

Sudhir Gill
in Design & CAD
0 0 Beginner
Here is the tutorial.
SOLIDWORKS feature boss fastening tutorial mounting
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.