KIERON GRAINGER

Working as a DC warehouse operative doing general duties that being Receiving, Decant, Rework, GTP, Returns and Reject Station.

Worked at Inivos on a temporary assignment assembling medical machines for hospitals that being their Ultra-V and ProXide Machines. Both were used in the decontamination of rooms/wards at hospitals. I was also doing soldering of electrical wiring to an electronic PCB board as well as resistors and varistors. Lost job due to nation wide lockdown.

Working four days a week at Amazon EUKB or EUKA trained in Order Picking, Scanning, Receiving And Stowing.

During my time at this company, I was using PTC Creo, Windchill and Teamcenter (SAP). Creating 3D models in Creo, creating sub-assemblies or General assembly models and detail drawings, and saving them to Windchill then creating Pdf’s of the detail drawing and moving the Pdf drawings over to Teamcenter (SAP). Have a DBS security clearance and a BPSS security clearance. Lost my job due to nation wide lockdown.

Was involved in the Design and manufacture of a Meat Shell Separator Conveyor for Deal Brothers Using Autodesk Inventor and Autodesk Vault. Used sheet metal, frame design working with Stainless Steel 304 and 316. Lost my job due to nation wide lockdown.

Designing commercial kitchens using Solidworks 2020 and AVI CAD (AutoCAD). Working mostly with Weldments (For Frames) and Sheetmetal and working closely with the factory floor.

Working closely with Project Managers to draw CTM equipment using Solidworks, AutoCAD and Autodesk Inventor taking designs from GA’s and concept drawings through to factory issue or Manufacturing Drawings. Working mostly on Screw conveyors, Hoppers, Support Frame design and sheet metal.

Used Autodesk Inventor doing mostly sheet metal work and 2D Drawings. I was also involved In the Design of a Platform and Industrial Ladder for Aston Martin.

Used Solid Edge ST10 worked with Weldments, Sheetmetal, Frames Geometric Tolerancing of turned components for their MGS300 Shaker Range used in the Oil and Gas industry and Distribution Chambers that go into landfill gas extraction systems.

Used Autodesk Inventor 2019 and AutoCAD 2019 doing mostly P&ID work and 2D Pipe Flow chart drawings. I was also involved in a project for Flint Ink and a pipe survey for Carlsberg, Northampton.

Created 2D drawings from 3D models mostly Sheetmetal and frames done in Weldments. Used Solidworks 2017 and used EPDM Vault. I was involved on a number of projects namely Lebedyan Russia, Walkers, PFI Pakistan and Pepsico Ukraine.

Worked on two Projects Crown Paints designing a Tubular Incline Screw Conveyor and a Large Hopper with a 15 Meter Trough Screw Conveyor mounted underneath the Hopper for Argent Energy UK Ltd. Using Solidworks 2016 and AutoCAD 2015 then Nested the flat sheet metal layouts in SigmaNest so that the parts may be laser cut.

Worked on backward engineering a Polycarbonate Card Punch Tool using Solidworks 2017 then creating 2D Detail Drawings with Geometrical Tolerancing. I also used Solidworks EPDM Vault.

Worked on Special Purpose machinery mainly large Industrial Cook Tanks and Large Industrial Kettle/Jet cook mixing tanks using Autodesk Inventor 2018 and AutoCAD 2018. Mostly sheet metal design.

Worked on a project called the Snubber Welder for Danfoss Used Solidworks 2016, MS Word and Excel. Created 3D models in Solidworks mostly using Weldments, Sheetmetal and standard 3D components that were sent to Nielsoft in India for further design and development.

Worked on a Project for Nestle Purina P2 designing a platform along with mixing Tanks and Storage tanks for this Platform Using Weldments and Sheetmetal in Solidworks 2017 and Draftsite

Worked on Sheet Metal (Stainless Steel 316) components and plastic (Delrin and Pet-G) Seals and Covers for their Powder filling machines using Solidworks 2015, EPDM (Vault) and Microsoft Office 2016.

Worked on the London Dock project using Autodesk Inventor 2016 and AutoCAD. Created 3D models In Inventor from drawings in AutoCAD and from these 3D models created Detail manufacturing drawings.

Worked on the London Victoria Station upgrade using Autodesk Inventor 2014 and AutoCAD 2014 Working with sheet metal and designing tiles for the station.

Used Radan 3D and Soildworks 2015 to create General Assembly drawings for Enclosures/Control Panels for the Oil and Gas industry.

Used Autodesk Inventor 2013 and Autodesk Vault. I was involved in the rebranding of their Title block from GE Air Filtration to Clarcor Air Filtration. Also created 2D drawings of various Sub assembly Drawings.

Used Autodesk Inventor 2014 and Autodesk Vault 2014. I was involved in converting 3D models into working 2D drawings to have part produced.

Working on a project destined for Portugal. This Project is a large Shot Peening machine to relieve stress in aircraft wings. I was using Autodesk Inventor 2014 and Autodesk Vault 2014. Making modifications to parts then producing workable drawings. I was also producing sheet metal components using Autodesk Inventor.

Worked at IGS using SolidWorks 2014 . Using EPDM I was checking out drawings making changes or updating drawings then Checking them in then changing the state, submitting for checking, check passed or even release to production or even ECR Requested.

Worked on their Sortex S machine using Autodesk Inventor 2013 and AutoCAD 2013. Updating models and drawings, Sheet metal drawings, Issuing change notes and workshop orders etc. I was also using Autodesk Inventor Vault (Checking in and Checking out [Smarteam and Enterprise PDM]).

Presently working for a company that specialises in Rear Bumpers and Tow units which are designed for all makes of vehicles they also do special jobs. At the moment I am involved on a project called the Pallet Mover for air ports. I am using Solidedge ST6 and AutoCAD 2002.

Worked for Secomak an Automation company who produce bespoke machinery for The food and Pharmaceutical industries all over the world. I was involved in the design of a conveyor system that would dry a Capri sun drinking pouch using Air knifes. This conveyor was destined for the United States of America. Used Solidworks 2013, Autodesk Inventor 2013, AutoCAD 2013 and Solidworks PDM. I was also involved in issuing an ECR (Engineering Change Request) and Issuing an ECN (Engineering Change Notice) when a model or drawing had to be changed or updated.

Worked as a Design Engineer using Solidworks 2013 I have been involved in four projects Namely for Deb Ltd, Gripple, Aptar and Wyeth. The company I worked for produce specialized automation machinery for the Food, Pharmaceutical and Medical companies. Also used PDM which is where you would store all your work once you have checked them in it is similar to Autodesk Inventor Vault.

Worked at Subsea Components and I am involved in three projects that are ongoing Namely C.I.V’s (Hydraulic and ROV) , Shuttle Valves and Stabplates. Using SolidWorks 2011 and AutoCAD 2011. Working with materials such as Stainless Steel 316 S11, Nitronic 50 and 60, Inconel 601, Super Duplex and a variety of other metals.

Designing components using SolidWorks 2010 and Autodesk Inventor 2010 then machining these components on a Lathe and a Milling machine. These components are for small radio controlled aircraft engines and are made from various materials from Aluminium, Mild Steal, and Stainless Steel to very expensive materials like Inconel.

Worked at LOMA SYSTEMS and was involved with their CW3 (Check weigh 3) conveyor system, this system X-Rays the product (Food or Pharmaceutical products) for foreign material ferrous and non ferrous material if any foreign material is detected the product is rejected into a reject bin attached to the side of the conveyor the same conveyor will also weigh the product for the correct weight if the product is under weight or over weight it will be rejected into another bin.

I was involved in various projects at SHS Conveyors. Worked on a project for DELL Computers in Limerick had to design a new Trash Conveyor. Worked on a project for Code – X Office Supplies also had to go to site to measure up their new building floor area so that the conveying system could be manufactured to customer’s satisfaction. Worked on the redesigning of the Benchmark ball tables these had to have pneumatic cylinders installed so that they could lock a pallet into position.

Producing component/part drawings for their production facility using AutoCAD R13 and AutoCAD R14. Issuing documentation, liase with factory personnel and the purchasing department Involved on a project called MAUSER filing cabinet and Cope 2000.

Worked at AMD Rotoloc as a junior Draughtsman and helped out in the drawing office and assisted in the design of Rotary Vane Feeders, Knife gates, Clamshell gates and Diverter Chutes. Worked on a drawing board for a while then moved onto AutoCAD R12 once I had completed my training.