Kim Kronslev

Hire me

632

followers

Copenhagen, Denmark

Models

Sort by: Recent
Chain Size 525
Motorcycle chain size 525 (15T/39T 104 links). On request I hereby upload the 525 chain from the Monster 1100S. Obviously it can be configured to...
49 1353 2
Brembo 19 RCS brake master
The Brembo 19 RCS brake master cylinder with adjustable ratio. (Brembo ID 10.A263.10) The model is created from measurements on the actual part, ...
147 2481 11
Ducati 1098/1198 - Ohlins FGRT211 fork
The Ohlins FGRT211 fork legs for the 1098 S/R and 1198 S/R/SP. These are from the new 200 series with TTX-technology, and this is the Ducati appli...
78 1251 6
Ducati 1199 Panigale - Rear shock
The aftermarket Ohlins TTX rear shock for the 1199 Panigale, without the electronic damping valves (Ohlins ID: DU930). Created from measurements o...
73 1184 5
Husqvarna Nuda 900R - Rear shock
The fully adjustable Ohlins unit from the Nuda 900R. Created from measurements on the actual parts, so all interfaces are 100% true, but no intern...
32 593 1
Husqvarna Nuda 900R - Rear wheel
The rear wheel from the Nuda 900R, and as far as I know originating directly from the F800R, except for the sprocket. The wheel itself is not that ...
81 1269 12
Husqvarna Nuda 900R - Front wheel
The front wheel from the Nuda 900, and as far as I know originating directly from the F800R. The special design with the swepts spokes and the moun...
36 723 0
Husqvarna Nuda 900R - Fork legs
The fully adjustable fork legs from Sachs for the Nuda 900R. Created from measurements on the actual parts, so all interfaces are 100% true, but n...
23 359 0
Husqvarna Nuda 900R - Front end
The almost complete front end from the Nuda 900R, with the fully adjustable Sachs forklegs and the Brembo M4 monoblock calipers. The headlight ass...
148 3551 16
Husqvarna Nuda 900R - Radiator
The radiator from the Nuda 900R, and as far as I know it's origin is the F800. Created from measurements on the actual part, so all interfaces are ...
71 1190 3
Gilles Variobar clipon
The Variobar clipon from Gilles. A bit bulky, but with adjustability. Here for fork diameter 50 mm, and without the optional extenders. Created f...
37 537 2
Brembo brake/clutch master
As used on the Ducati Monster 1100, and a number of other Italian bikes. The levers are not the original from Brembo, but replaced with the short ...
118 2514 8
Ducati Monster 1100 Headlight/Instrument
The standard headlight with instrument from the Monster 1100. Created from measurements on the actual parts, so all interfaces are 100 % true. A n...
51 1255 5
Ducati Monster 1100S Yoke/handlebar
The original yoke and handlebar assembly from the Monster 1100 (2009-2011). It is said that the handlebar is changed on the newer EVO-model, but I ...
197 4473 15
Ducati Monster 1100S Ohlins fork legs
The standard Ohlins forklegs from the 1100S-model (only 2009-2011). Created from measurements on the actual parts, so all interfaces are 100 % tru...
65 1478 5
Ducati Monster 1100S Frontwheel
The standard cast (not forged) wheel from the 1100S model with disc carriers in aluminium and 120/70R17 tyre. Created from measurements on the act...
94 2343 5
Brembo Monoblock calipers
The cast monoblock calipers P4-34 from Brembo with 100 mm bolt pattern. Created from measurements on the actual parts, so interfaces and offset ar...
130 3323 9
Ducati Monster 1100S Front end
From the 1100S with Ohlins fork (only 2009-2011). Created from measurement on all the actual parts, so all interfaces are 100 % true. I have made ...
179 3619 10
Ducati Monster 1100S Ohlins Rear shock
The Ohlins unit used on the S-model (only 2009-2011). Created from measurements on the actual part, so all interfaces are 100 % true. This is a s...
87 2651 5
MotoCorse rearsets (for Ducati Monster 1100)
The rearsets from MotoCorse used on my own trackday-Monster. The only ones I could find that gives the correct seating position, and on a pre-EVO-...
116 2342 9
Ducati 848/1098 Seat
This is the racing neoprene seat, but the shape is the same as the OEM seat. Created from measurements on the actual seat, but this is not from a ...
56 1294 4
Ducati 998 Seat
The monoposto seat. This was created from a digital point scan on the actual seat, so the lower and outer edges are within +/- 1 mm. But the fron...
39 1064 0
Ducati Monster 1100S Rear wheel
The standard cast rear wheel (not forged) with 180/55R17 tyre and drive unit. Created for engineering by measuring on the actual parts, so all int...
108 3056 5
Ducati Monster 1100S Rearswingarm
From the Monster 1100S 2009. Created for engineering from measurements on the actual parts, so all interfaces are 100 % true (all the interface ar...
122 2245 14
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.