Learn about the GrabCAD Platform

Get to know GrabCAD as an open software platform for Additive Manufacturing

Visit our new homepage

Rollin Shultz

My Motto: Ask for help when needed, give help when asked, and remember where you came from.

Hire me

60

followers

Allentown,Pa, United States

Models

Gantry Crane - Portable with tool less assembly and adjustable length/lifting capacity

This is my design for a highly adaptable gantry crane for use in my home garage/shop. I wanted to use some parts already in my possession rather th...

86 1607 10

Linear Actuator D-Slide (Newmark Systems)

Solidworks 2012, I needed a plug in Linear actuator for another project but I ended up reverse engineering one from scratch. It is not an exact rep...

57 1998 9

Invisible hinge

This is a Soss 208 invisible hinge. In Solidworks 2012 it works in an assembly as designed. I suppose as a step file the mates would be lost and ap...

33 1789 6

round wire mesh for filter

Wire mesh is from Hans De Ridder here: https://grabcad.com/library/wire-mesh-2-10-double-woven-1 Descon design asked for one cut round for a filte...

28 2293 6

Table Saw Jig for Ship lap joints

This jig is a model of one I built for my basement wood shop to cut frame pieces on a table saw. It is perfect for picture frames. It slides in a m...

21 348 6

Drawer Slide - soft close

Typical .5 inch drawer slide like Accuride's. It has a soft close bumper and includes the ball bearings, bearing rails and formed slides.

20 1419 3

Folding Clamp and Glue Bench

It is meant to be a solution to clamping and gluing wood projects in the workshop without the need for buying many clamps. All clamping force is pr...

16 88 0

Solidworks 2012 Kitchen cabinets with drawers and joinery

This is a kitchen cabinet 30" x 30" with drawers and even a big pot in the big drawer. the top drawer is made with butt joints but the other two ar...

13 74 5

Portable CNC Router

Solidworks 2012, This concept is not meant to be a full blown .0005 inch error CNC. It is for transport to a site and flattening table and bench to...

12 98 0

Trebuchet

This is intended as an experiment with design tables and equations, but once started I found out Solidworks was not able to do what I wanted to do ...

11 114 0

Mustang Side Opera Window Louvre

I designed this to work with surfaces and to use as part of my porfolio to apply for an position at an automotive accessory manufacturer. I enjoy w...

11 134 3

Spiral Heat Exchanger

This is a 36" x 36" vessel with an inner roll of stainless 316L for heat exchange of fluids. It is constructed of plate steel in various configurat...

10 218 5

Stand Alone Workout Station

This is for doing Lat, leg raise abs triceps and other exercises. The arm assemblies hook to the top or middle depending on what exercises you are ...

9 209 2

chrome plated storage rack

This rack is the snap together type with the little black sleeves that hold up the racks. I have two in my kitchen and modeled these up to visualiz...

9 332 3

NFC Reader Challenge

This one uses the AA batteries and is either table laying or wall mounted. Their are two simple plastic castings and I gave the pc board a little e...

6 132 1

This is a model of the Mike Jarvi steam bent bench

This is made from a single slab of wood and craftily cut then steam bent to create the bench shape out of one piece. It is an amazing feat of furni...

6 79 1

This is a small keepsake box

It opens by sliding the hidden pegs through hidden dovetail joints.

6 126 0

This is the complete 80' Box Beam bridge

I uploaded part of this bridge with a showing of form work for pouring walls. This is the entire bridge structure with beams, deck and parapet wall...

6 89 3

Nema 34 motor smart component

This goes in your design library. You drag it out onto a mounting plate and it will cut the mounting holes and populate them with socket head cap s...

6 67 2

Some Hardware Examples

I was studying fasteners for an upcoming youtube tutorial and decided to make a few with real. UTF standard threads. It seems making threads is a r...

6 235 4

Crosscut Sled for Table Saw

Here is another table saw project it is my crosscut sled for my basement workshop. I built it first and modeled it later. It performs well although...

4 134 0

glass and wire planter

I whipped this up to show a questioner how to sketch a 3D sketch by joining multiple 2D sketches.

4 46 1

Umbra Paper Towel Holder with Night Light

Under mount paper towel holder with night light in front. Black Plastic with SS front. Left side opens for easy loading. Mounting plate screws to u...

3 74 0

Jersey Barrier

I needed some Jersey barriers for a bridge project and the one I found here was a future version so I decided to upload mine in Solidworks 2012 to ...

3 220 0