3D Print CoreXY 200x200x180

ININFORMATION ABOUT 3D PRINTERS :
 Modeling Technology: FDM
 Printing size: 200x200x180mm
 Machine size: 340x380x400mm
 Fliament: 1.75mm PLA, TPU, ABS
 Input: AC 100-265V 50-60Hz
 Output: DC 12V 30A
 Layer thickness:0.1-0.4mm
 Nozzle diameter:0.4mm
 File format: STL, OBJ, G-code
 Max nozzle Temp: 255ºC
Max hot bed Temp: 110ºC

  1. Step 1: USER MANUAL EASY 3D PRINTER


    Step 1: Place the machine on a flat surface.

    (as shown in figure 1.1).

    If placed incorrectly, the frame will be affected

    the machine and the machine will vibrate when printing, damaging the printed part.

    B2: Power to the printer

    When plugging in the power source, it is necessary to check the certainty to avoid the loose source affecting the print result.

    B3: Apply glue on the heat table

    (as shown in figure 1.2).

    The purpose is for the printed part to stick to the heat table better. Avoid moving parts while printing. After time need to clean the table

    heat for better adhesion.

    B4: Insert the printing plastic into the machine

    (as shown in figure 1.3).

    Insert the plastic wire into the plastic extruder. Note that when installing, it is necessary to heat the print head so that the plastic can be fully extruded and after printing, it must also be heated to remove the plastic wire. The purpose is to avoid plastic clogging.

    B5: Plug the memory card into the LCD circuit

    (as shown in figure 1.4).

    The memory card plugged into the machine is a memory card that stores files for printing in .G-code format.

    B6: Select the print file and proceed to print.

    (as shown in Figure 1.5).

    Perform control operation on LCD circuit to select print file and confirm printing.

    B7: Monitor the printer.

    To ensure safe operation.




Comments