Tutorials

  • Design & CAD ×
  • Translations ×
  • IronCAD ×
  • TinkerCAD ×
  • T-Flex CAD ×
  • ViaCAD 3D ×
  • GrabCAD Print ×
  • Cinema 4D ×

How to make a parametric model of the spring in the T-FLEX Parametric CAD 2D/3D?

Tomek F.
in Design & CAD
0 0 Beginner
oh yes!
T-Flex CAD spring parametric

Tutorial: How to behaves the option "path of pipe" in the T-FLEX Parametric CAD

Tomek F.
in Design & CAD
0 0 Beginner
a video tutorial can be found here http://youtu.be/VaIJWryiwBM
T-Flex CAD pipe parametric t-flex tflex

Tutorial: How to make a spiral on a curve in the T-FLEX Parametric CAD?

Tomek F.
in Design & CAD
0 0 Beginner
This guide is located here in the form of a film http://youtu.be/16SiVxQNMfs
T-Flex CAD

IronCAD - Multifeature part from one Cross Section

Nick
in Modeling
0 0 Intermediate
Create a pipe section with flanges at each end, using one circle to drive the bore diameter with flange OD offset from this.
IronCAD mechanical section cross pipe ironcad

Tutorial: how to use the file format. jpg eg for format CAD in the T-FLEX Parametric CAD?

Tomek F.
in Design & CAD
0 0 Beginner
You can do it on any wall model or the active surfaces
T-Flex CAD parametric t-flex tflex

JP_005_GrabCAD Print: 部品摺動部の隙間をＦＤＭ造形する方法

Stratasys Japan
in Assemblies
0 0 Intermediate
造形後にはめ合わせるまたは摺動（スライド）させる必要がある部品を3D造形する場合、CADシステムで該当する部品の間にある程度の隙間を設ける必要があります。目安として、造形する際の積層ピッチの2倍の隙間から始めるとよいでしょう。ただし、小さいサイズで何度かテスト造形を行い、積層ピッチの2倍の法則が特定の状況や向きに当てはまるかを確認することをお勧めします。それでは3Dプリンタで楽しくモノづくりをしていきましょう！
GrabCAD Print fdm 3d printing clearance sliding

Урок 2. Знакомство с интерфейсом T-FLEX CAD

Victor Stasevsky
in Modeling
0 0 Beginner
Ссылка на особенности, интерфейса, настройка : https://clck.ru/PJ8Tj
T-Flex CAD t-flex vis

Урок 3.Создание 3D-Модели фланца

Victor Stasevsky
in Modeling
0 0 Beginner
Краткий вводный курс по созданию 3D модели: https://www.tflexcad.ru/help/cad/15/index.html?beginning_3d.htm
T-Flex CAD cad t-flex vis

Урок 6. 3D-сборка болтового соединения фланцев

Victor Stasevsky
in Modeling
0 0 Beginner
Создание сборки из 3D фрагментов: https://www.tflexcad.ru/help/cad/16/3f.htm
T-Flex CAD cad t-flex vis

Урок 10.Подготовка файла для 3D печати .Экспорт в STL формат

Victor Stasevsky
in Modeling
0 0 Beginner
О том как подготовить вашу 3D-модель к печати смотрите в видео. Дополнительная информация доступа по ссылкам ниже: https://getfab.ru/post/47783/ https://www.tflexcad.ru/help/cad/15/index.html?ex_stl.htm
T-Flex CAD cad t-flex vis

Tutorial: How to create a helix along a 3D curve

Yaroslav
in Design & CAD
0 0 Beginner
Look the video. Important moments: - The orientation of cross section - Twist profile angle must be more then 360 Angel: 360*15 = 5400, Where 15 - number of coils Result file: http://grabcad.com/library/tutorial-how-to-create-a-helix-along-a-3d-curve-1
IronCAD 3d ironcad curve helix cord tipsntricks

tutorial how to make a wrist in the T-flex cad

Tomek F.
in Design & CAD
0 0 Intermediate
the same way you do a variety of programs
T-Flex CAD

How to modify any model in the Tflex parametric CAD?

Tomek F.
in Design & CAD
0 0 Beginner
options are not shown all that can be used to modify These are directly related to the walls and let you work on foreign models
T-Flex CAD parametrics t-flex

Tutorial: how to use the file format. jpg eg for format CAD in the T-FLEX Parametric CAD?

Tomek F.
in Design & CAD
0 1 Beginner
Last minute
T-Flex CAD parametric t-flex tflex

How to Manage Printer Materials in GrabCAD Shop

Stratasys
in Design & CAD
0 0 Beginner
GrabCAD Shop allows users to manage their 3D printer materials via the Admin Console and the shop itself as an operator. Please note that only admins have access to the Admin Console.
GrabCAD Print print shop materials grabcad shop
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.